This application is a continuation of International Application No. PCT/US2022/046883, filed Oct. 17, 2022, which claims the benefit of U.S. Provisional Application No. 63/256,709, filed Oct. 18, 2021, all of which are hereby incorporated by reference in their entireties.
Examples of several of the various embodiments of the present disclosure are described herein with reference to the drawings.
FIG. 1A and FIG. 1B illustrate example mobile communication networks in which embodiments of the present disclosure may be implemented.
FIG. 2A and FIG. 2B respectively illustrate a New Radio (NR) user plane and control plane protocol stack.
FIG. 3 illustrates an example of services provided between protocol layers of the NR user plane protocol stack of FIG. 2A.
FIG. 4A illustrates an example downlink data flow through the NR user plane protocol stack of FIG. 2A.
FIG. 4B illustrates an example format of a MAC subheader in a MAC PDU.
FIG. 5A and FIG. 5B respectively illustrate a mapping between logical channels, transport channels, and physical channels for the downlink and uplink.
FIG. 6 is an example diagram showing RRC state transitions of a UE.
FIG. 7 illustrates an example configuration of an NR frame into which OFDM symbols are grouped.
FIG. 8 illustrates an example configuration of a slot in the time and frequency domain for an NR carrier.
FIG. 9 illustrates an example of bandwidth adaptation using three configured BWPs for an NR carrier.
FIG. 10A illustrates three carrier aggregation configurations with two component carriers.
FIG. 10B illustrates an example of how aggregated cells may be configured into one or more PUCCH groups.
FIG. 11A illustrates an example of an SS/PBCH block structure and location.
FIG. 11B illustrates an example of CSI-RSs that are mapped in the time and frequency domains.
FIG. 12A and FIG. 12B respectively illustrate examples of three downlink and uplink beam management procedures.
FIG. 13A, FIG. 13B, and FIG. 13C respectively illustrate a four-step contention-based random access procedure, a two-step contention-free random access procedure, and another two-step random access procedure.
FIG. 14A illustrates an example of CORESET configurations for a bandwidth part.
FIG. 14B illustrates an example of a CCE-to-REG mapping for DCI transmission on a CORESET and PDCCH processing.
FIG. 15 illustrates an example of a wireless device in communication with a base station.
FIG. 16A, FIG. 16B, FIG. 16C, and FIG. 16D illustrate example structures for uplink and downlink transmission.
FIG. 17 illustrates an example of an RRC connection reestablishment procedure.
FIG. 18 illustrates an example of an RRC connection resume procedure.
FIG. 19A illustrates a user plane (UP) protocol stack.
FIG. 19B illustrates a control plane (CP) protocol stack.
FIG. 19C illustrates services provided between protocol layers of the UP protocol stack.
FIG. 20 illustrates an example of a quality of service (QoS) model for differentiated data exchange.
FIG. 21A is an example diagram showing RRC state transitions of a wireless device.
FIG. 21B is an example diagram showing registration management (RM) state transitions of a wireless device.
FIG. 21C is an example diagram showing connection management (CM) state transitions of a wireless device.
FIG. 21D is an example diagram showing CM state transitions of the wireless device.
FIG. 22 illustrates an example of a registration procedure for a wireless device.
FIG. 23 illustrates an example of a service request procedure for a wireless device.
FIG. 24 illustrates a table of access categories and rules for attempting access.
FIG. 25 illustrates an example of a multi-USIM device.
FIG. 26 illustrates an example of switching gap time without leaving an RRC connected state in a first network.
FIG. 27A illustrates an example of AS based notification to leave an RRC connected state in a first network
FIG. 27B illustrates an example of NAS based request procedure to release a connection of a first network.
FIG. 28 illustrates an example of a procedure to transmit data associated with a first network during a switching gap time on a second network.
FIG. 29 illustrates an example of enhanced procedure to transmit data pending over a first network during a switching gap time.
FIG. 30 illustrates an example of flow diagram to transmit data pending over a first device during a gap time of a second device.
FIG. 31 illustrates an example of enhanced procedure to transmit data of delay sensitive service pending over a first network during a switching gap time.
FIG. 32 illustrates an example of enhanced procedure to transmit a signal to recover a radio failure of a first network during a switching gap time.
FIG. 33 illustrates an example of enhance procedure to transmit a request to release a connection to a first network during a switching gap time.
FIG. 34 illustrates an example of access stratum (AS) based procedure to transmit data associated with a first device during a gap time on a second device.
FIG. 35 an example of non-access stratum (NAS) based procedure to transmit data associated with a first device during a gap time on a second device.
In the present disclosure, various embodiments are presented as examples of how the disclosed techniques may be implemented and/or how the disclosed techniques may be practiced in environments and scenarios. It will be apparent to persons skilled in the relevant art that various changes in form and detail can be made therein without departing from the scope. In fact, after reading the description, it will be apparent to one skilled in the relevant art how to implement alternative embodiments. The present embodiments should not be limited by any of the described exemplary embodiments. The embodiments of the present disclosure will be described with reference to the accompanying drawings. Limitations, features, and/or elements from the disclosed example embodiments may be combined to create further embodiments within the scope of the disclosure. Any figures which highlight the functionality and advantages, are presented for example purposes only. The disclosed architecture is sufficiently flexible and configurable, such that it may be utilized in ways other than that shown. For example, the actions listed in any flowchart may be re-ordered or only optionally used in some embodiments.
Embodiments may be configured to operate as needed. The disclosed mechanism may be performed when certain criteria are met, for example, in a wireless device, a base station, a radio environment, a network, a combination of the above, and/or the like. Example criteria may be based, at least in part, on for example, wireless device or network node configurations, traffic load, initial system set up, packet sizes, traffic characteristics, a combination of the above, and/or the like. When the one or more criteria are met, various example embodiments may be applied. Therefore, it may be possible to implement example embodiments that selectively implement disclosed protocols.
A base station may communicate with a mix of wireless devices. Wireless devices and/or base stations may support multiple technologies, and/or multiple releases of the same technology. Wireless devices may have some specific capability(ies) depending on wireless device category and/or capability(ies). When this disclosure refers to a base station communicating with a plurality of wireless devices, this disclosure may refer to a subset of the total wireless devices in a coverage area. This disclosure may refer to, for example, a plurality of wireless devices of given LTE or 5G release with a given capability and in a given sector of the base station. The plurality of wireless devices in this disclosure may refer to a selected plurality of wireless devices, and/or a subset of total wireless devices in a coverage area which perform according to disclosed methods, and/or the like. There may be a plurality of base stations or a plurality of wireless devices in a coverage area that may not comply with the disclosed methods, for example, those wireless devices or base stations may perform based on older releases of LTE or 5G technology.
In this disclosure, “a” and “an” and similar phrases are to be interpreted as “at least one” and “one or more.” Similarly, any term that ends with the suffix “(s)” is to be interpreted as “at least one” and “one or more.” In this disclosure, the term “may” is to be interpreted as “may, for example.” In other words, the term “may” is indicative that the phrase following the term “may” is an example of one of a multitude of suitable possibilities that may, or may not, be employed by one or more of the various embodiments. The terms “comprises” and “consists of”, as used herein, enumerate one or more components of the element being described. The term “comprises” is interchangeable with “includes” and does not exclude unenumerated components from being included in the element being described. By contrast, “consists of” provides a complete enumeration of the one or more components of the element being described. The term “based on”, as used herein, should be interpreted as “based at least in part on” rather than, for example, “based solely on”. The term “and/or” as used herein represents any possible combination of enumerated elements. For example, “A, B, and/or C” may represent A; B; C; A and B; A and C; B and C; or A, B, and C.
If A and B are sets and every element of A is an element of B, A is called a subset of B. In this specification, only non-empty sets and subsets are considered. For example, possible subsets of B={cell1, cell2} are: {cell1}, {cell2}, and {cell1, cell2}. The phrase “based on” (or equally “based at least on”) is indicative that the phrase following the term “based on” is an example of one of a multitude of suitable possibilities that may, or may not, be employed to one or more of the various embodiments. The phrase “in response to” (or equally “in response at least to”) is indicative that the phrase following the phrase “in response to” is an example of one of a multitude of suitable possibilities that may, or may not, be employed to one or more of the various embodiments. The phrase “depending on” (or equally “depending at least to”) is indicative that the phrase following the phrase “depending on” is an example of one of a multitude of suitable possibilities that may, or may not, be employed to one or more of the various embodiments. The phrase “employing/using” (or equally “employing/using at least”) is indicative that the phrase following the phrase “employing/using” is an example of one of a multitude of suitable possibilities that may, or may not, be employed to one or more of the various embodiments.
The term configured may relate to the capacity of a device whether the device is in an operational or non-operational state. Configured may refer to specific settings in a device that effect the operational characteristics of the device whether the device is in an operational or non-operational state. In other words, the hardware, software, firmware, registers, memory values, and/or the like may be “configured” within a device, whether the device is in an operational or nonoperational state, to provide the device with specific characteristics. Terms such as “a control message to cause in a device” may mean that a control message has parameters that may be used to configure specific characteristics or may be used to implement certain actions in the device, whether the device is in an operational or non-operational state.
In this disclosure, parameters (or equally called, fields, or Information elements: IEs) may comprise one or more information objects, and an information object may comprise one or more other objects. For example, if parameter (IE) N comprises parameter (IE) M, and parameter (IE) M comprises parameter (IE) K, and parameter (IE) K comprises parameter (information element) J. Then, for example, N comprises K, and N comprises J. In an example embodiment, when one or more messages comprise a plurality of parameters, it implies that a parameter in the plurality of parameters is in at least one of the one or more messages, but does not have to be in each of the one or more messages.
Many features presented are described as being optional through the use of “may” or the use of parentheses. For the sake of brevity and legibility, the present disclosure does not explicitly recite each and every permutation that may be obtained by choosing from the set of optional features. The present disclosure is to be interpreted as explicitly disclosing all such permutations. For example, a system described as having three optional features may be embodied in seven ways, namely with just one of the three possible features, with any two of the three possible features or with three of the three possible features.
Many of the elements described in the disclosed embodiments may be implemented as modules. A module is defined here as an element that performs a defined function and has a defined interface to other elements. The modules described in this disclosure may be implemented in hardware, software in combination with hardware, firmware, wetware (e.g., hardware with a biological element) or a combination thereof, which may be behaviorally equivalent. For example, modules may be implemented as a software routine written in a computer language configured to be executed by a hardware machine (such as C, C++, Fortran, Java, Basic, Matlab or the like) or a modeling/simulation program such as Simulink, Stateflow, GNU Octave, or LabVIEWMathScript. It may be possible to implement modules using physical hardware that incorporates discrete or programmable analog, digital and/or quantum hardware. Examples of programmable hardware comprise: computers, microcontrollers, microprocessors, application-specific integrated circuits (ASICs); field programmable gate arrays (FPGAs); and complex programmable logic devices (CPLDs). Computers, microcontrollers and microprocessors are programmed using languages such as assembly, C, C++ or the like. FPGAs, ASICs and CPLDs are often programmed using hardware description languages (HDL) such as VHSIC hardware description language (VHDL) or Verilog that configure connections between internal hardware modules with lesser functionality on a programmable device. The mentioned technologies are often used in combination to achieve the result of a functional module.
FIG. 1A illustrates an example of a mobile communication network 100 in which embodiments of the present disclosure may be implemented. The mobile communication network 100 may be, for example, a public land mobile network (PLMN) run by a network operator. As illustrated in FIG. 1A, the mobile communication network 100 includes a core network (CN) 102, a radio access network (RAN) 104, and a wireless device 106.
The CN 102 may provide the wireless device 106 with an interface to one or more data networks (DNs), such as public DNs (e.g., the Internet), private DNs, and/or intra-operator DNs. As part of the interface functionality, the CN 102 may set up end-to-end connections between the wireless device 106 and the one or more DNs, authenticate the wireless device 106, and provide charging functionality.
The RAN 104 may connect the CN 102 to the wireless device 106 through radio communications over an air interface. As part of the radio communications, the RAN 104 may provide scheduling, radio resource management, and retransmission protocols. The communication direction from the RAN 104 to the wireless device 106 over the air interface is known as the downlink and the communication direction from the wireless device 106 to the RAN 104 over the air interface is known as the uplink. Downlink transmissions may be separated from uplink transmissions using frequency division duplexing (FDD), time-division duplexing (TDD), and/or some combination of the two duplexing techniques.
The term wireless device may be used throughout this disclosure to refer to and encompass any mobile device or fixed (non-mobile) device for which wireless communication is needed or usable. For example, a wireless device may be a telephone, smart phone, tablet, computer, laptop, sensor, meter, wearable device, Internet of Things (IoT) device, vehicle road side unit (RSU), relay node, automobile, and/or any combination thereof. The term wireless device encompasses other terminology, including user equipment (UE), user terminal (UT), access terminal (AT), mobile station, handset, wireless transmit and receive unit (WTRU), and/or wireless communication device.
The RAN 104 may include one or more base stations (not shown). The term base station may be used throughout this disclosure to refer to and encompass a Node B (associated with UMTS and/or 3G standards), an Evolved Node B (eNB, associated with E-UTRA and/or 4G standards), a remote radio head (RRH), a baseband processing unit coupled to one or more RRHs, a repeater node or relay node used to extend the coverage area of a donor node, a Next Generation Evolved Node B (ng-eNB), a Generation Node B (gNB, associated with NR and/or 5G standards), an access point (AP, associated with, for example, WiFi or any other suitable wireless communication standard), and/or any combination thereof. A base station may comprise at least one gNB Central Unit (gNB-CU) and at least one a gNB Distributed Unit (gNB-DU).
A base station included in the RAN 104 may include one or more sets of antennas for communicating with the wireless device 106 over the air interface. For example, one or more of the base stations may include three sets of antennas to respectively control three cells (or sectors). The size of a cell may be determined by a range at which a receiver (e.g., a base station receiver) can successfully receive the transmissions from a transmitter (e.g., a wireless device transmitter) operating in the cell. Together, the cells of the base stations may provide radio coverage to the wireless device 106 over a wide geographic area to support wireless device mobility.
In addition to three-sector sites, other implementations of base stations are possible. For example, one or more of the base stations in the RAN 104 may be implemented as a sectored site with more or less than three sectors. One or more of the base stations in the RAN 104 may be implemented as an access point, as a baseband processing unit coupled to several remote radio heads (RRHs), and/or as a repeater or relay node used to extend the coverage area of a donor node. A baseband processing unit coupled to RRHs may be part of a centralized or cloud RAN architecture, where the baseband processing unit may be either centralized in a pool of baseband processing units or virtualized. A repeater node may amplify and rebroadcast a radio signal received from a donor node. A relay node may perform the same/similar functions as a repeater node but may decode the radio signal received from the donor node to remove noise before amplifying and rebroadcasting the radio signal.
The RAN 104 may be deployed as a homogenous network of macrocell base stations that have similar antenna patterns and similar high-level transmit powers. The RAN 104 may be deployed as a heterogeneous network. In heterogeneous networks, small cell base stations may be used to provide small coverage areas, for example, coverage areas that overlap with the comparatively larger coverage areas provided by macrocell base stations. The small coverage areas may be provided in areas with high data traffic (or so-called “hotspots”) or in areas with weak macrocell coverage. Examples of small cell base stations include, in order of decreasing coverage area, microcell base stations, picocell base stations, and femtocell base stations or home base stations.
The Third-Generation Partnership Project (3GPP) was formed in 1998 to provide global standardization of specifications for mobile communication networks similar to the mobile communication network 100 in FIG. 1A. To date, 3GPP has produced specifications for three generations of mobile networks: a third generation (3G) network known as Universal Mobile Telecommunications System (UMTS), a fourth generation (4G) network known as Long-Term Evolution (LTE), and a fifth generation (5G) network known as 5G System (5GS). Embodiments of the present disclosure are described with reference to the RAN of a 3GPP 5G network, referred to as next-generation RAN (NG-RAN). Embodiments may be applicable to RANs of other mobile communication networks, such as the RAN 104 in FIG. 1A, the RANs of earlier 3G and 4G networks, and those of future networks yet to be specified (e.g., a 3GPP 6G network). NG-RAN implements 5G radio access technology known as New Radio (NR) and may be provisioned to implement 4G radio access technology or other radio access technologies, including non-3GPP radio access technologies.
FIG. 1B illustrates another example mobile communication network 150 in which embodiments of the present disclosure may be implemented. Mobile communication network 150 may be, for example, a PLMN run by a network operator. As illustrated in FIG. 1B, mobile communication network 150 includes a 5G core network (5G-CN) 152, an NG-RAN 154, and UEs 156A and 156B (collectively UEs 156). These components may be implemented and operate in the same or similar manner as corresponding components described with respect to FIG. 1A.
The 5G-CN 152 provides the UEs 156 with an interface to one or more DNs, such as public DNs (e.g., the Internet), private DNs, and/or intra-operator DNs. As part of the interface functionality, the 5G-CN 152 may set up end-to-end connections between the UEs 156 and the one or more DNs, authenticate the UEs 156, and provide charging functionality. Compared to the CN of a 3GPP 4G network, the basis of the 5G-CN 152 may be a service-based architecture. This means that the architecture of the nodes making up the 5G-CN 152 may be defined as network functions that offer services via interfaces to other network functions. The network functions of the 5G-CN 152 may be implemented in several ways, including as network elements on dedicated or shared hardware, as software instances running on dedicated or shared hardware, or as virtualized functions instantiated on a platform (e.g., a cloud-based platform).
As illustrated in FIG. 1B, the 5G-CN 152 includes an Access and Mobility Management Function (AMF) 158A and a User Plane Function (UPF) 158B, which are shown as one component AMF/UPF 158 in FIG. 1B for ease of illustration. The UPF 158B may serve as a gateway between the NG-RAN 154 and the one or more DNs. The UPF 158B may perform functions such as packet routing and forwarding, packet inspection and user plane policy rule enforcement, traffic usage reporting, uplink classification to support routing of traffic flows to the one or more DNs, quality of service (QoS) handling for the user plane (e.g., packet filtering, gating, uplink/downlink rate enforcement, and uplink traffic verification), downlink packet buffering, and downlink data notification triggering. The UPF 158B may serve as an anchor point for intra-/inter-Radio Access Technology (RAT) mobility, an external protocol (or packet) data unit (PDU) session point of interconnect to the one or more DNs, and/or a branching point to support a multi-homed PDU session. The UEs 156 may be configured to receive services through a PDU session, which is a logical connection between a UE and a DN.
The AMF 158A may perform functions such as Non-Access Stratum (NAS) signaling termination, NAS signaling security, Access Stratum (AS) security control, inter-CN node signaling for mobility between 3GPP access networks, idle mode UE reachability (e.g., control and execution of paging retransmission), registration area management, intra-system and inter-system mobility support, access authentication, access authorization including checking of roaming rights, mobility management control (subscription and policies), network slicing support, and/or session management function (SMF) selection. NAS may refer to the functionality operating between a CN and a UE, and AS may refer to the functionality operating between the UE and a RAN.
The 5G-CN 152 may include one or more additional network functions that are not shown in FIG. 1B for the sake of clarity. For example, the 5G-CN 152 may include one or more of a Session Management Function (SMF), an NR Repository Function (NRF), a Policy Control Function (PCF), a Network Exposure Function (NEF), a Unified Data Management (UDM), an Application Function (AF), and/or an Authentication Server Function (AUSF).
The NG-RAN 154 may connect the 5G-CN 152 to the UEs 156 through radio communications over the air interface. The NG-RAN 154 may include one or more gNBs, illustrated as gNB 160A and gNB 160B (collectively gNBs 160) and/or one or more ng-eNBs, illustrated as ng-eNB 162A and ng-eNB 162B (collectively ng-eNBs 162). The gNBs 160 and ng-eNBs 162 may be more generically referred to as base stations. The gNBs 160 and ng-eNBs 162 may include one or more sets of antennas for communicating with the UEs 156 over an air interface. For example, one or more of the gNBs 160 and/or one or more of the ng-eNBs 162 may include three sets of antennas to respectively control three cells (or sectors). Together, the cells of the gNBs 160 and the ng-eNBs 162 may provide radio coverage to the UEs 156 over a wide geographic area to support UE mobility.
As shown in FIG. 1B, the gNBs 160 and/or the ng-eNBs 162 may be connected to the 5G-CN 152 by means of an NG interface and to other base stations by an Xn interface. The NG and Xn interfaces may be established using direct physical connections and/or indirect connections over an underlying transport network, such as an internet protocol (IP) transport network. The gNBs 160 and/or the ng-eNBs 162 may be connected to the UEs 156 by means of a Uu interface. For example, as illustrated in FIG. 1B, gNB 160A may be connected to the UE 156A by means of a Uu interface. The NG, Xn, and Uu interfaces are associated with a protocol stack. The protocol stacks associated with the interfaces may be used by the network elements in FIG. 1B to exchange data and signaling messages and may include two planes: a user plane and a control plane. The user plane may handle data of interest to a user. The control plane may handle signaling messages of interest to the network elements.
The gNBs 160 and/or the ng-eNBs 162 may be connected to one or more AMF/UPF functions of the 5G-CN 152, such as the AMF/UPF 158, by means of one or more NG interfaces. For example, the gNB 160A may be connected to the UPF 158B of the AMF/UPF 158 by means of an NG-User plane (NG-U) interface. The NG-U interface may provide delivery (e.g., non-guaranteed delivery) of user plane PDUs between the gNB 160A and the UPF 158B. The gNB 160A may be connected to the AMF 158A by means of an NG-Control plane (NG-C) interface. The NG-C interface may provide, for example, NG interface management, UE context management, UE mobility management, transport of NAS messages, paging, PDU session management, and configuration transfer and/or warning message transmission.
The gNBs 160 may provide NR user plane and control plane protocol terminations towards the UEs 156 over the Uu interface. For example, the gNB 160A may provide NR user plane and control plane protocol terminations toward the UE 156A over a Uu interface associated with a first protocol stack. The ng-eNBs 162 may provide Evolved UMTS Terrestrial Radio Access (E-UTRA) user plane and control plane protocol terminations towards the UEs 156 over a Uu interface, where E-UTRA refers to the 3GPP 4G radio-access technology. For example, the ng-eNB 162B may provide E-UTRA user plane and control plane protocol terminations towards the UE 156B over a Uu interface associated with a second protocol stack.
The 5G-CN 152 was described as being configured to handle NR and 4G radio accesses. It will be appreciated by one of ordinary skill in the art that it may be possible for NR to connect to a 4G core network in a mode known as “non-standalone operation.” In non-standalone operation, a 4G core network is used to provide (or at least support) control-plane functionality (e.g., initial access, mobility, and paging). Although only one AMF/UPF 158 is shown in FIG. 1B, one gNB or ng-eNB may be connected to multiple AMF/UPF nodes to provide redundancy and/or to load share across the multiple AMF/UPF nodes.
As discussed, an interface (e.g., Uu, Xn, and NG interfaces) between the network elements in FIG. 1B may be associated with a protocol stack that the network elements use to exchange data and signaling messages. A protocol stack may include two planes: a user plane and a control plane. The user plane may handle data of interest to a user, and the control plane may handle signaling messages of interest to the network elements.
FIG. 2A and FIG. 2B respectively illustrate examples of NR user plane and NR control plane protocol stacks for the Uu interface that lies between a UE 210 and a gNB 220. The protocol stacks illustrated in FIG. 2A and FIG. 2B may be the same or similar to those used for the Uu interface between, for example, the UE 156A and the gNB 160A shown in FIG. 1B.
FIG. 2A illustrates a NR user plane protocol stack comprising five layers implemented in the UE 210 and the gNB 220. At the bottom of the protocol stack, physical layers (PHYs) 211 and 221 may provide transport services to the higher layers of the protocol stack and may correspond to layer 1 of the Open Systems Interconnection (OSI) model. The next four protocols above PHYs 211 and 221 comprise media access control layers (MACs) 212 and 222, radio link control layers (RLCs) 213 and 223, packet data convergence protocol layers (PDCPs) 214 and 224, and service data application protocol layers (SDAPs) 215 and 225. Together, these four protocols may make up layer 2, or the data link layer, of the OSI model.
FIG. 3 illustrates an example of services provided between protocol layers of the NR user plane protocol stack. Starting from the top of FIG. 2A and FIG. 3, the SDAPs 215 and 225 may perform QoS flow handling. The UE 210 may receive services through a PDU session, which may be a logical connection between the UE 210 and a DN. The PDU session may have one or more QoS flows. A UPF of a CN (e.g., the UPF 158B) may map IP packets to the one or more QoS flows of the PDU session based on QoS requirements (e.g., in terms of delay, data rate, and/or error rate). The SDAPs 215 and 225 may perform mapping/de-mapping between the one or more QoS flows and one or more data radio bearers. The mapping/de-mapping between the QoS flows and the data radio bearers may be determined by the SDAP 225 at the gNB 220. The SDAP 215 at the UE 210 may be informed of the mapping between the QoS flows and the data radio bearers through reflective mapping or control signaling received from the gNB 220. For reflective mapping, the SDAP 225 at the gNB 220 may mark the downlink packets with a QoS flow indicator (QFI), which may be observed by the SDAP 215 at the UE 210 to determine the mapping/de-mapping between the QoS flows and the data radio bearers.
The PDCPs 214 and 224 may perform header compression/decompression to reduce the amount of data that needs to be transmitted over the air interface, ciphering/deciphering to prevent unauthorized decoding of data transmitted over the air interface, and integrity protection (to ensure control messages originate from intended sources. The PDCPs 214 and 224 may perform retransmissions of undelivered packets, in-sequence delivery and reordering of packets, and removal of packets received in duplicate due to, for example, an intra-gNB handover. The PDCPs 214 and 224 may perform packet duplication to improve the likelihood of the packet being received and, at the receiver, remove any duplicate packets. Packet duplication may be useful for services that require high reliability.
Although not shown in FIG. 3, PDCPs 214 and 224 may perform mapping/de-mapping between a split radio bearer and RLC channels in a dual connectivity scenario. Dual connectivity is a technique that allows a UE to connect to two cells or, more generally, two cell groups: a master cell group (MCG) and a secondary cell group (SCG). A split bearer is when a single radio bearer, such as one of the radio bearers provided by the PDCPs 214 and 224 as a service to the SDAPs 215 and 225, is handled by cell groups in dual connectivity. The PDCPs 214 and 224 may map/de-map the split radio bearer between RLC channels belonging to cell groups.
The RLCs 213 and 223 may perform segmentation, retransmission through Automatic Repeat Request (ARQ), and removal of duplicate data units received from MACs 212 and 222, respectively. The RLCs 213 and 223 may support three transmission modes: transparent mode (TM); unacknowledged mode (UM); and acknowledged mode (AM). Based on the transmission mode an RLC is operating, the RLC may perform one or more of the noted functions. The RLC configuration may be per logical channel with no dependency on numerologies and/or Transmission Time Interval (TTI) durations. As shown in FIG. 3, the RLCs 213 and 223 may provide RLC channels as a service to PDCPs 214 and 224, respectively.
The MACs 212 and 222 may perform multiplexing/demultiplexing of logical channels and/or mapping between logical channels and transport channels. The multiplexing/demultiplexing may include multiplexing/demultiplexing of data units, belonging to the one or more logical channels, into/from Transport Blocks (TBs) delivered to/from the PHYs 211 and 221. The MAC 222 may be configured to perform scheduling, scheduling information reporting, and priority handling between UEs by means of dynamic scheduling. Scheduling may be performed in the gNB 220 (at the MAC 222) for downlink and uplink. The MACs 212 and 222 may be configured to perform error correction through Hybrid Automatic Repeat Request (HARQ) (e.g., one HARQ entity per carrier in case of Carrier Aggregation (CA)), priority handling between logical channels of the UE 210 by means of logical channel prioritization, and/or padding. The MACs 212 and 222 may support one or more numerologies and/or transmission timings. In an example, mapping restrictions in a logical channel prioritization may control which numerology and/or transmission timing a logical channel may use. As shown in FIG. 3, the MACs 212 and 222 may provide logical channels as a service to the RLCs 213 and 223.
The PHYs 211 and 221 may perform mapping of transport channels to physical channels and digital and analog signal processing functions for sending and receiving information over the air interface. These digital and analog signal processing functions may include, for example, coding/decoding and modulation/demodulation. The PHYs 211 and 221 may perform multi-antenna mapping. As shown in FIG. 3, the PHYs 211 and 221 may provide one or more transport channels as a service to the MACs 212 and 222.
FIG. 4A illustrates an example downlink data flow through the NR user plane protocol stack. FIG. 4A illustrates a downlink data flow of three IP packets (n, n+1, and m) through the NR user plane protocol stack to generate two TBs at the gNB 220. An uplink data flow through the NR user plane protocol stack may be similar to the downlink data flow depicted in FIG. 4A.
The downlink data flow of FIG. 4A begins when SDAP 225 receives the three IP packets from one or more QoS flows and maps the three packets to radio bearers. In FIG. 4A, the SDAP 225 maps IP packets n and n+1 to a first radio bearer 402 and maps IP packet m to a second radio bearer 404. An SDAP header (labeled with an “H” in FIG. 4A) is added to an IP packet. The data unit from/to a higher protocol layer is referred to as a service data unit (SDU) of the lower protocol layer and the data unit to/from a lower protocol layer is referred to as a protocol data unit (PDU) of the higher protocol layer. As shown in FIG. 4A, the data unit from the SDAP 225 is an SDU of lower protocol layer PDCP 224 and is a PDU of the SDAP 225.
The remaining protocol layers in FIG. 4A may perform their associated functionality (e.g., with respect to FIG. 3), add corresponding headers, and forward their respective outputs to the next lower layer. For example, the PDCP 224 may perform IP-header compression and ciphering and forward its output to the RLC 223. The RLC 223 may optionally perform segmentation (e.g., as shown for IP packet m in FIG. 4A) and forward its output to the MAC 222. The MAC 222 may multiplex a number of RLC PDUs and may attach a MAC subheader to an RLC PDU to form a transport block. In NR, the MAC subheaders may be distributed across the MAC PDU, as illustrated in FIG. 4A. In LTE, the MAC subheaders may be entirely located at the beginning of the MAC PDU. The NR MAC PDU structure may reduce processing time and associated latency because the MAC PDU subheaders may be computed before the full MAC PDU is assembled.
FIG. 4B illustrates an example format of a MAC subheader in a MAC PDU. The MAC subheader includes: an SDU length field for indicating the length (e.g., in bytes) of the MAC SDU to which the MAC subheader corresponds; a logical channel identifier (LCID) field for identifying the logical channel from which the MAC SDU originated to aid in the demultiplexing process; a flag (F) for indicating the size of the SDU length field; and a reserved bit (R) field for future use.
FIG. 4B further illustrates MAC control elements (CEs) inserted into the MAC PDU by a MAC, such as MAC 223 or MAC 222. For example, FIG. 4B illustrates two MAC CEs inserted into the MAC PDU. MAC CEs may be inserted at the beginning of a MAC PDU for downlink transmissions (as shown in FIG. 4B) and at the end of a MAC PDU for uplink transmissions. MAC CEs may be used for in-band control signaling. Example MAC CEs include: scheduling-related MAC CEs, such as buffer status reports and power headroom reports; activation/deactivation MAC CEs, such as those for activation/deactivation of PDCP duplication detection, channel state information (CSI) reporting, sounding reference signal (SRS) transmission, and prior configured components; discontinuous reception (DRX) related MAC CEs; timing advance MAC CEs; and random access related MAC CEs. A MAC CE may be preceded by a MAC subheader with a similar format as described for MAC SDUs and may be identified with a reserved value in the LCID field that indicates the type of control information included in the MAC CE.
Before describing the NR control plane protocol stack, logical channels, transport channels, and physical channels are first described as well as a mapping between the channel types. One or more of the channels may be used to carry out functions associated with the NR control plane protocol stack described later below.
FIG. 5A and FIG. 5B illustrate, for downlink and uplink respectively, a mapping between logical channels, transport channels, and physical channels. Information is passed through channels between the RLC, the MAC, and the PHY of the NR protocol stack. A logical channel may be used between the RLC and the MAC and may be classified as a control channel that carries control and configuration information in the NR control plane or as a traffic channel that carries data in the NR user plane. A logical channel may be classified as a dedicated logical channel that is dedicated to a specific UE or as a common logical channel that may be used by more than one UE. A logical channel may also be defined by the type of information it carries. The set of logical channels defined by NR include, for example:
-
- a paging control channel (PCCH) for carrying paging messages used to page a UE whose location is not known to the network on a cell level;
- a broadcast control channel (BCCH) for carrying system information messages in the form of a master information block (MIB) and several system information blocks (SIBs), wherein the system information messages may be used by the UEs to obtain information about how a cell is configured and how to operate within the cell;
- a common control channel (CCCH) for carrying control messages together with random access;
- a dedicated control channel (DCCH) for carrying control messages to/from a specific the UE to configure the UE; and
- a dedicated traffic channel (DTCH) for carrying user data to/from a specific the UE.
Transport channels are used between the MAC and PHY layers and may be defined by how the information they carry is transmitted over the air interface. The set of transport channels defined by NR include, for example:
-
- a paging channel (PCH) for carrying paging messages that originated from the PCCH;
- a broadcast channel (BCH) for carrying the MIB from the BCCH;
- a downlink shared channel (DL-SCH) for carrying downlink data and signaling messages, including the SIBs from the BCCH;
- an uplink shared channel (UL-SCH) for carrying uplink data and signaling messages; and
- a random access channel (RACH) for allowing a UE to contact the network without any prior scheduling.
The PHY may use physical channels to pass information between processing levels of the PHY. A physical channel may have an associated set of time-frequency resources for carrying the information of one or more transport channels. The PHY may generate control information to support the low-level operation of the PHY and provide the control information to the lower levels of the PHY via physical control channels, known as L1/L2 control channels. The set of physical channels and physical control channels defined by NR include, for example:
-
- a physical broadcast channel (PBCH) for carrying the MIB from the BCH;
- a physical downlink shared channel (PDSCH) for carrying downlink data and signaling messages from the DL-SCH, as well as paging messages from the PCH;
- a physical downlink control channel (PDCCH) for carrying downlink control information (DCI), which may include downlink scheduling commands, uplink scheduling grants, and uplink power control commands;
- a physical uplink shared channel (PUSCH) for carrying uplink data and signaling messages from the UL-SCH and in some instances uplink control information (UCI) as described below;
- a physical uplink control channel (PUCCH) for carrying UCI, which may include HARQ acknowledgments, channel quality indicators (CQI), pre-coding matrix indicators (PMI), rank indicators (RI), and scheduling requests (SR); and
- a physical random access channel (PRACH) for random access.
Similar to the physical control channels, the physical layer generates physical signals to support the low-level operation of the physical layer. As shown in FIG. 5A and FIG. 5B, the physical layer signals defined by NR include: primary synchronization signals (PSS), secondary synchronization signals (SSS), channel state information reference signals (CSI-RS), demodulation reference signals (DMRS), sounding reference signals (SRS), and phase-tracking reference signals (PT-RS). These physical layer signals will be described in greater detail below.
FIG. 2B illustrates an example NR control plane protocol stack. As shown in FIG. 2B, the NR control plane protocol stack may use the same/similar first four protocol layers as the example NR user plane protocol stack. These four protocol layers include the PHYs 211 and 221, the MACs 212 and 222, the RLCs 213 and 223, and the PDCPs 214 and 224. Instead of having the SDAPs 215 and 225 at the top of the stack as in the NR user plane protocol stack, the NR control plane stack has radio resource controls (RRCs) 216 and 226 and NAS protocols 217 and 237 at the top of the NR control plane protocol stack.
The NAS protocols 217 and 237 may provide control plane functionality between the UE 210 and the AMF 230 (e.g., the AMF 158A) or, more generally, between the UE 210 and the CN. The NAS protocols 217 and 237 may provide control plane functionality between the UE 210 and the AMF 230 via signaling messages, referred to as NAS messages. There is no direct path between the UE 210 and the AMF 230 through which the NAS messages can be transported. The NAS messages may be transported using the AS of the Uu and NG interfaces. NAS protocols 217 and 237 may provide control plane functionality such as authentication, security, connection setup, mobility management, and session management.
The RRCs 216 and 226 may provide control plane functionality between the UE 210 and the gNB 220 or, more generally, between the UE 210 and the RAN. The RRCs 216 and 226 may provide control plane functionality between the UE 210 and the gNB 220 via signaling messages, referred to as RRC messages. RRC messages may be transmitted between the UE 210 and the RAN using signaling radio bearers and the same/similar PDCP, RLC, MAC, and PHY protocol layers. The MAC may multiplex control-plane and user-plane data into the same transport block (TB). The RRCs 216 and 226 may provide control plane functionality such as: broadcast of system information related to AS and NAS; paging initiated by the CN or the RAN; establishment, maintenance and release of an RRC connection between the UE 210 and the RAN; security functions including key management; establishment, configuration, maintenance and release of signaling radio bearers and data radio bearers; mobility functions; QoS management functions; the UE measurement reporting and control of the reporting; detection of and recovery from radio link failure (RLF); and/or NAS message transfer. As part of establishing an RRC connection, RRCs 216 and 226 may establish an RRC context, which may involve configuring parameters for communication between the UE 210 and the RAN.
FIG. 6 is an example diagram showing RRC state transitions of a UE. The UE may be the same or similar to the wireless device 106 depicted in FIG. 1A, the UE 210 depicted in FIG. 2A and FIG. 2B, or any other wireless device described in the present disclosure. As illustrated in FIG. 6, a UE may be in at least one of three RRC states: RRC connected 602 (e.g., RRC_CONNECTED), RRC idle 604 (e.g., RRC_IDLE), and RRC inactive 606 (e.g., RRC_INACTIVE).
In RRC connected 602, the UE has an established RRC context and may have at least one RRC connection with a base station. The base station may be similar to one of the one or more base stations included in the RAN 104 depicted in FIG. 1A, one of the gNBs 160 or ng-eNBs 162 depicted in FIG. 1B, the gNB 220 depicted in FIG. 2A and FIG. 2B, or any other base station described in the present disclosure. The base station with which the UE is connected may have the RRC context for the UE. The RRC context, referred to as the UE context, may comprise parameters for communication between the UE and the base station. These parameters may include, for example: one or more AS contexts; one or more radio link configuration parameters; bearer configuration information (e.g., relating to a data radio bearer, signaling radio bearer, logical channel, QoS flow, and/or PDU session); security information; and/or PHY, MAC, RLC, PDCP, and/or SDAP layer configuration information. While in RRC connected 602, mobility of the UE may be managed by the RAN (e.g., the RAN 104 or the NG-RAN 154). The UE may measure the signal levels (e.g., reference signal levels) from a serving cell and neighboring cells and report these measurements to the base station currently serving the UE. The UE's serving base station may request a handover to a cell of one of the neighboring base stations based on the reported measurements. The RRC state may transition from RRC connected 602 to RRC idle 604 through a connection release procedure 608 or to RRC inactive 606 through a connection inactivation procedure 610.
In RRC idle 604, an RRC context may not be established for the UE. In RRC idle 604, the UE may not have an RRC connection with the base station. While in RRC idle 604, the UE may be in a sleep state for the majority of the time (e.g., to conserve battery power). The UE may wake up periodically (e.g., once in every discontinuous reception cycle) to monitor for paging messages from the RAN. Mobility of the UE may be managed by the UE through a procedure known as cell reselection. The RRC state may transition from RRC idle 604 to RRC connected 602 through a connection establishment procedure 612, which may involve a random access procedure as discussed in greater detail below.
In RRC inactive 606, the RRC context previously established is maintained in the UE and the base station. This allows for a fast transition to RRC connected 602 with reduced signaling overhead as compared to the transition from RRC idle 604 to RRC connected 602. While in RRC inactive 606, the UE may be in a sleep state and mobility of the UE may be managed by the UE through cell reselection. The RRC state may transition from RRC inactive 606 to RRC connected 602 through a connection resume procedure 614 or to RRC idle 604 though a connection release procedure 616 that may be the same as or similar to connection release procedure 608.
An RRC state may be associated with a mobility management mechanism. In RRC idle 604 and RRC inactive 606, mobility is managed by the UE through cell reselection. The purpose of mobility management in RRC idle 604 and RRC inactive 606 is to allow the network to be able to notify the UE of an event via a paging message without having to broadcast the paging message over the entire mobile communications network. The mobility management mechanism used in RRC idle 604 and RRC inactive 606 may allow the network to track the UE on a cell-group level so that the paging message may be broadcast over the cells of the cell group that the UE currently resides within instead of the entire mobile communication network. The mobility management mechanisms for RRC idle 604 and RRC inactive 606 track the UE on a cell-group level. They may do so using different granularities of grouping. For example, there may be three levels of cell-grouping granularity: individual cells; cells within a RAN area identified by a RAN area identifier (RAI); and cells within a group of RAN areas, referred to as a tracking area and identified by a tracking area identifier (TAI).
Tracking areas may be used to track the UE at the CN level. The CN (e.g., the CN 102 or the 5G-CN 152) may provide the UE with a list of TAIs associated with a UE registration area. If the UE moves, through cell reselection, to a cell associated with a TAI not included in the list of TAIs associated with the UE registration area, the U E may perform a registration update with the CN to allow the CN to update the UE's location and provide the UE with a new the UE registration area.
RAN areas may be used to track the UE at the RAN level. For a UE in RRC inactive 606 state, the UE may be assigned a RAN notification area. A RAN notification area may comprise one or more cell identities, a list of RAIs, or a list of TAIs. In an example, a base station may belong to one or more RAN notification areas. In an example, a cell may belong to one or more RAN notification areas. If the UE moves, through cell reselection, to a cell not included in the RAN notification area assigned to the UE, the UE may perform a notification area update with the RAN to update the UE's RAN notification area.
A base station storing an RRC context for a UE or a last serving base station of the UE may be referred to as an anchor base station. An anchor base station may maintain an RRC context for the UE at least during a period of time that the UE stays in a RAN notification area of the anchor base station and/or during a period of time that the UE stays in RRC inactive 606.
A gNB, such as gNBs 160 in FIG. 1B, may be split in two parts: a central unit (gNB-CU), and one or more distributed units (gNB-DU). A gNB-CU may be coupled to one or more gNB-DUs using an F1 interface. The gNB-CU may comprise the RRC, the PDCP, and the SDAP. A gNB-DU may comprise the RLC, the MAC, and the PHY.
In NR, the physical signals and physical channels (discussed with respect to FIG. 5A and FIG. 5B) may be mapped onto orthogonal frequency divisional multiplexing (OFDM) symbols. OFDM is a multicarrier communication scheme that transmits data over F orthogonal subcarriers (or tones). Before transmission, the data may be mapped to a series of complex symbols (e.g., M-quadrature amplitude modulation (M-QAM) or M-phase shift keying (M-PSK) symbols), referred to as source symbols, and divided into F parallel symbol streams. The F parallel symbol streams may be treated as though they are in the frequency domain and used as inputs to an Inverse Fast Fourier Transform (IFFT) block that transforms them into the time domain. The IFFT block may take in F source symbols at a time, one from each of the F parallel symbol streams, and use each source symbol to modulate the amplitude and phase of one of F sinusoidal basis functions that correspond to the F orthogonal subcarriers. The output of the IFFT block may be F time-domain samples that represent the summation of the F orthogonal subcarriers. The F time-domain samples may form a single OFDM symbol. After some processing (e.g., addition of a cyclic prefix) and up-conversion, an OFDM symbol provided by the IFFT block may be transmitted over the air interface on a carrier frequency. The F parallel symbol streams may be mixed using an FFT block before being processed by the IFFT block. This operation produces Discrete Fourier Transform (DFT)-precoded OFDM symbols and may be used by UEs in the uplink to reduce the peak to average power ratio (PAPR). Inverse processing may be performed on the OFDM symbol at a receiver using an FFT block to recover the data mapped to the source symbols.
FIG. 7 illustrates an example configuration of an NR frame into which OFDM symbols are grouped. An NR frame may be identified by a system frame number (SFN). The SFN may repeat with a period of 1024 frames. As illustrated, one NR frame may be 10 milliseconds (ms) in duration and may include 10 subframes that are 1 ms in duration. A subframe may be divided into slots that include, for example, 14 OFDM symbols per slot.
The duration of a slot may depend on the numerology used for the OFDM symbols of the slot. In NR, a flexible numerology is supported to accommodate different cell deployments (e.g., cells with carrier frequencies below 1 GHz up to cells with carrier frequencies in the mm-wave range). A numerology may be defined in terms of subcarrier spacing and cyclic prefix duration. For a numerology in NR, subcarrier spacings may be scaled up by powers of two from a baseline subcarrier spacing of 15 kHz, and cyclic prefix durations may be scaled down by powers of two from a baseline cyclic prefix duration of 4.7 μs. For example, NR defines numerologies with the following subcarrier spacing/cyclic prefix duration combinations: 15 kHz/4.7 μs; 30 kHz/2.3 μs; 60 kHz/1.2 μs; 120 kHz/0.59 μs; and 240 kHz/0.29 μs.
A slot may have a fixed number of OFDM symbols (e.g., 14 OFDM symbols). A numerology with a higher subcarrier spacing has a shorter slot duration and, correspondingly, more slots per subframe. FIG. 7 illustrates this numerology-dependent slot duration and slots-per-subframe transmission structure (the numerology with a subcarrier spacing of 240 kHz is not shown in FIG. 7 for ease of illustration). A subframe in NR may be used as a numerology-independent time reference, while a slot may be used as the unit upon which uplink and downlink transmissions are scheduled. To support low latency, scheduling in NR may be decoupled from the slot duration and start at any OFDM symbol and last for as many symbols as needed for a transmission. These partial slot transmissions may be referred to as mini-slot or subslot transmissions.
FIG. 8 illustrates an example configuration of a slot in the time and frequency domain for an NR carrier. The slot includes resource elements (REs) and resource blocks (RBs). An RE is the smallest physical resource in NR. An RE spans one OFDM symbol in the time domain by one subcarrier in the frequency domain as shown in FIG. 8. An RB spans twelve consecutive REs in the frequency domain as shown in FIG. 8. An NR carrier may be limited to a width of 275 RBs or 275×12=3300 subcarriers. Such a limitation, if used, may limit the NR carrier to 50, 100, 200, and 400 MHz for subcarrier spacings of 15, 30, 60, and 120 kHz, respectively, where the 400 MHz bandwidth may be set based on a 400 MHz per carrier bandwidth limit.
FIG. 8 illustrates a single numerology being used across the entire bandwidth of the NR carrier. In other example configurations, multiple numerologies may be supported on the same carrier.
NR may support wide carrier bandwidths (e.g., up to 400 MHz for a subcarrier spacing of 120 kHz). Not all UEs may be able to receive the full carrier bandwidth (e.g., due to hardware limitations). Also, receiving the full carrier bandwidth may be prohibitive in terms of UE power consumption. In an example, to reduce power consumption and/or for other purposes, a UE may adapt the size of the UE's receive bandwidth based on the amount of traffic the UE is scheduled to receive. This is referred to as bandwidth adaptation.
NR defines bandwidth parts (BWPs) to support UEs not capable of receiving the full carrier bandwidth and to support bandwidth adaptation. In an example, a BWP may be defined by a subset of contiguous RBs on a carrier. A UE may be configured (e.g., via an RRC layer) with one or more downlink BWPs and one or more uplink BWPs per serving cell (e.g., up to four downlink BWPs and up to four uplink BWPs per serving cell). At a given time, one or more of the configured BWPs for a serving cell may be active. These one or more BWPs may be referred to as active BWPs of the serving cell. When a serving cell is configured with a secondary uplink carrier, the serving cell may have one or more first active BWPs in the uplink carrier and one or more second active BWPs in the secondary uplink carrier.
For unpaired spectra, a downlink BWP from a set of configured downlink BWPs may be linked with an uplink BWP from a set of configured uplink BWPs if a downlink BWP index of the downlink BWP and an uplink BWP index of the uplink BWP are the same. For unpaired spectra, a UE may expect that a center frequency for a downlink BWP is the same as a center frequency for an uplink BWP.
For a downlink BWP in a set of configured downlink BWPs on a primary cell (PCell), a base station may configure a UE with one or more control resource sets (CORESETs) for at least one search space. A search space is a set of locations in the time and frequency domains where the UE may find control information. The search space may be a UE-specific search space or a common search space (potentially usable by a plurality of UEs). For example, a base station may configure a UE with a common search space, on a PCell or on a primary secondary cell (PSCell), in an active downlink BWP.
For an uplink BWP in a set of configured uplink BWPs, a BS may configure a UE with one or more resource sets for one or more PUCCH transmissions. A UE may receive downlink receptions (e.g., PDCCH or PDSCH) in a downlink BWP according to a configured numerology (e.g., subcarrier spacing and cyclic prefix duration) for the downlink BWP. The UE may transmit uplink transmissions (e.g., PUCCH or PUSCH) in an uplink BWP according to a configured numerology (e.g., subcarrier spacing and cyclic prefix length for the uplink BWP).
One or more BWP indicator fields may be provided in Downlink Control Information (DCI). A value of a BWP indicator field may indicate which BWP in a set of configured BWPs is an active downlink BWP for one or more downlink receptions. The value of the one or more BWP indicator fields may indicate an active uplink BWP for one or more uplink transmissions.
A base station may semi-statically configure a UE with a default downlink BWP within a set of configured downlink BWPs associated with a PCell. If the base station does not provide the default downlink BWP to the UE, the default downlink BWP may be an initial active downlink BWP. The UE may determine which BWP is the initial active downlink BWP based on a CORESET configuration obtained using the PBCH.
A base station may configure a UE with a BWP inactivity timer value for a PCell. The UE may start or restart a BWP inactivity timer at any appropriate time. For example, the UE may start or restart the BWP inactivity timer (a) when the UE detects a DCI indicating an active downlink BWP other than a default downlink BWP for a paired spectra operation; or (b) when a UE detects a DCI indicating an active downlink BWP or active uplink BWP other than a default downlink BWP or uplink BWP for an unpaired spectra operation. If the UE does not detect DCI during an interval of time (e.g., 1 ms or 0.5 ms), the UE may run the BWP inactivity timer toward expiration (for example, increment from zero to the BWP inactivity timer value, or decrement from the BWP inactivity timer value to zero). When the BWP inactivity timer expires, the UE may switch from the active downlink BWP to the default downlink BWP.
In an example, a base station may semi-statically configure a UE with one or more BWPs. A UE may switch an active BWP from a first BWP to a second BWP in response to receiving a DCI indicating the second BWP as an active BWP and/or in response to an expiry of the BWP inactivity timer (e.g., if the second BWP is the default BWP).
Downlink and uplink BWP switching (where BWP switching refers to switching from a currently active BWP to a not currently active BWP) may be performed independently in paired spectra. In unpaired spectra, downlink and uplink BWP switching may be performed simultaneously. Switching between configured BWPs may occur based on RRC signaling, DCI, expiration of a BWP inactivity timer, and/or an initiation of random access.
FIG. 9 illustrates an example of bandwidth adaptation using three configured BWPs for an NR carrier. A UE configured with the three BWPs may switch from one BWP to another BWP at a switching point. In the example illustrated in FIG. 9, the BWPs include: a BWP 902 with a bandwidth of 40 MHz and a subcarrier spacing of 15 kHz; a BWP 904 with a bandwidth of 10 MHz and a subcarrier spacing of 15 kHz; and a BWP 906 with a bandwidth of 20 MHz and a subcarrier spacing of 60 kHz. The BWP 902 may be an initial active BWP, and the BWP 904 may be a default BWP. The UE may switch between BWPs at switching points. In the example of FIG. 9, the UE may switch from the BWP 902 to the BWP 904 at a switching point 908. The switching at the switching point 908 may occur for any suitable reason, for example, in response to an expiry of a BWP inactivity timer (indicating switching to the default BWP) and/or in response to receiving a DCI indicating BWP 904 as the active BWP. The UE may switch at a switching point 910 from active BWP 904 to BWP 906 in response receiving a DCI indicating BWP 906 as the active BWP. The UE may switch at a switching point 912 from active BWP 906 to BWP 904 in response to an expiry of a BWP inactivity timer and/or in response receiving a DCI indicating BWP 904 as the active BWP. The UE may switch at a switching point 914 from active BWP 904 to BWP 902 in response receiving a DCI indicating BWP 902 as the active BWP.
If a UE is configured for a secondary cell with a default downlink BWP in a set of configured downlink BWPs and a timer value, UE procedures for switching BWPs on a secondary cell may be the same/similar as those on a primary cell. For example, the UE may use the timer value and the default downlink BWP for the secondary cell in the same/similar manner as the UE would use these values for a primary cell.
To provide for greater data rates, two or more carriers can be aggregated and simultaneously transmitted to/from the same UE using carrier aggregation (CA). The aggregated carriers in CA may be referred to as component carriers (CCs). When CA is used, there are a number of serving cells for the UE, one for a CC. The CCs may have three configurations in the frequency domain.
FIG. 10A illustrates the three CA configurations with two CCs. In the intraband, contiguous configuration 1002, the two CCs are aggregated in the same frequency band (frequency band A) and are located directly adjacent to each other within the frequency band. In the intraband, non-contiguous configuration 1004, the two CCs are aggregated in the same frequency band (frequency band A) and are separated in the frequency band by a gap. In the interband configuration 1006, the two CCs are located in frequency bands (frequency band A and frequency band B).
In an example, up to 32 CCs may be aggregated. The aggregated CCs may have the same or different bandwidths, subcarrier spacing, and/or duplexing schemes (TDD or FDD). A serving cell for a UE using CA may have a downlink CC. For FDD, one or more uplink CCs may be optionally configured for a serving cell. The ability to aggregate more downlink carriers than uplink carriers may be useful, for example, when the UE has more data traffic in the downlink than in the uplink.
When CA is used, one of the aggregated cells for a UE may be referred to as a primary cell (PCell). The PCell may be the serving cell that the UE initially connects to at RRC connection establishment, reestablishment, and/or handover. The PCell may provide the UE with NAS mobility information and the security input. UEs may have different PCells. In the downlink, the carrier corresponding to the PCell may be referred to as the downlink primary CC (DL PCC). In the uplink, the carrier corresponding to the PCell may be referred to as the uplink primary CC (UL PCC). The other aggregated cells for the UE may be referred to as secondary cells (SCells). In an example, the SCells may be configured after the PCell is configured for the UE. For example, an SCell may be configured through an RRC Connection Reconfiguration procedure. In the downlink, the carrier corresponding to an SCell may be referred to as a downlink secondary CC (DL SCC). In the uplink, the carrier corresponding to the SCell may be referred to as the uplink secondary CC (UL SCC).
Configured SCells for a UE may be activated and deactivated based on, for example, traffic and channel conditions. Deactivation of an SCell may mean that PDCCH and PDSCH reception on the SCell is stopped and PUSCH, SRS, and CQI transmissions on the SCell are stopped. Configured SCells may be activated and deactivated using a MAC CE with respect to FIG. 4B. For example, a MAC CE may use a bitmap (e.g., one bit per SCell) to indicate which SCells (e.g., in a subset of configured SCells) for the UE are activated or deactivated. Configured SCells may be deactivated in response to an expiration of an SCell deactivation timer (e.g., one SCell deactivation timer per SCell).
Downlink control information, such as scheduling assignments and scheduling grants, for a cell may be transmitted on the cell corresponding to the assignments and grants, which is known as self-scheduling. The DCI for the cell may be transmitted on another cell, which is known as cross-carrier scheduling. Uplink control information (e.g., HARQ acknowledgments and channel state feedback, such as CQI, PMI, and/or RI) for aggregated cells may be transmitted on the PUCCH of the PCell. For a larger number of aggregated downlink CCs, the PUCCH of the PCell may become overloaded. Cells may be divided into multiple PUCCH groups.
FIG. 10B illustrates an example of how aggregated cells may be configured into one or more PUCCH groups. A PUCCH group 1010 and a PUCCH group 1050 may include one or more downlink CCs, respectively. In the example of FIG. 10B, the PUCCH group 1010 includes three downlink CCs: a PCell 1011, an SCell 1012, and an SCell 1013. The PUCCH group 1050 includes three downlink CCs in the present example: a PCell 1051, an SCell 1052, and an SCell 1053. One or more uplink CCs may be configured as a PCell 1021, an SCell 1022, and an SCell 1023. One or more other uplink CCs may be configured as a primary SCell (PSCell) 1061, an SCell 1062, and an SCell 1063. Uplink control information (UCI) related to the downlink CCs of the PUCCH group 1010, shown as UCI 1031, UCI 1032, and UCI 1033, may be transmitted in the uplink of the PCell 1021. Uplink control information (UCI) related to the downlink CCs of the PUCCH group 1050, shown as UCI 1071, UCI 1072, and UCI 1073, may be transmitted in the uplink of the PSCell 1061. In an example, if the aggregated cells depicted in FIG. 10B were not divided into the PUCCH group 1010 and the PUCCH group 1050, a single uplink PCell to transmit UCI relating to the downlink CCs, and the PCell may become overloaded. By dividing transmissions of UCI between the PCell 1021 and the PSCell 1061, overloading may be prevented.
A cell, comprising a downlink carrier and optionally an uplink carrier, may be assigned with a physical cell ID and a cell index. The physical cell ID or the cell index may identify a downlink carrier and/or an uplink carrier of the cell, for example, depending on the context in which the physical cell ID is used. A physical cell ID may be determined using a synchronization signal transmitted on a downlink component carrier. A cell index may be determined using RRC messages. In the disclosure, a physical cell ID may be referred to as a carrier ID, and a cell index may be referred to as a carrier index. For example, when the disclosure refers to a first physical cell ID for a first downlink carrier, the disclosure may mean the first physical cell ID is for a cell comprising the first downlink carrier. The same/similar concept may apply to, for example, a carrier activation. When the disclosure indicates that a first carrier is activated, the specification may mean that a cell comprising the first carrier is activated.
In CA, a multi-carrier nature of a PHY may be exposed to a MAC. In an example, a HARQ entity may operate on a serving cell. A transport block may be generated per assignment/grant per serving cell. A transport block and potential HARQ retransmissions of the transport block may be mapped to a serving cell.
In the downlink, a base station may transmit (e.g., unicast, multicast, and/or broadcast) one or more Reference Signals (RSs) to a UE (e.g., PSS, SSS, CSI-RS, DMRS, and/or PT-RS, as shown in FIG. 5A). In the uplink, the UE may transmit one or more RSs to the base station (e.g., DMRS, PT-RS, and/or SRS, as shown in FIG. 5B). The PSS and the SSS may be transmitted by the base station and used by the UE to synchronize the UE to the base station. The PSS and the SSS may be provided in a synchronization signal (SS)/physical broadcast channel (PBCH) block that includes the PSS, the SSS, and the PBCH. The base station may periodically transmit a burst of SS/PBCH blocks.
FIG. 11A illustrates an example of an SS/PBCH block's structure and location. A burst of SS/PBCH blocks may include one or more SS/PBCH blocks (e.g., 4 SS/PBCH blocks, as shown in FIG. 11A). Bursts may be transmitted periodically (e.g., every 2 frames or 20 ms). A burst may be restricted to a half-frame (e.g., a first half-frame having a duration of 5 ms). It will be understood that FIG. 11A is an example, and that these parameters (number of SS/PBCH blocks per burst, periodicity of bursts, position of burst within the frame) may be configured based on, for example: a carrier frequency of a cell in which the SS/PBCH block is transmitted; a numerology or subcarrier spacing of the cell; a configuration by the network (e.g., using RRC signaling); or any other suitable factor. In an example, the UE may assume a subcarrier spacing for the SS/PBCH block based on the carrier frequency being monitored, unless the radio network configured the UE to assume a different subcarrier spacing.
The SS/PBCH block may span one or more OFDM symbols in the time domain (e.g., 4 OFDM symbols, as shown in the example of FIG. 11A) and may span one or more subcarriers in the frequency domain (e.g., 240 contiguous subcarriers). The PSS, the SSS, and the PBCH may have a common center frequency. The PSS may be transmitted first and may span, for example, 1 OFDM symbol and 127 subcarriers. The SSS may be transmitted after the PSS (e.g., two symbols later) and may span 1 OFDM symbol and 127 subcarriers. The PBCH may be transmitted after the PSS (e.g., across the next 3 OFDM symbols) and may span 240 subcarriers.
The location of the SS/PBCH block in the time and frequency domains may not be known to the UE (e.g., if the UE is searching for the cell). To find and select the cell, the UE may monitor a carrier for the PSS. For example, the UE may monitor a frequency location within the carrier. If the PSS is not found after a certain duration (e.g., 20 ms), the UE may search for the PSS at a different frequency location within the carrier, as indicated by a synchronization raster. If the PSS is found at a location in the time and frequency domains, the UE may determine, based on a known structure of the SS/PBCH block, the locations of the SSS and the PBCH, respectively. The SS/PBCH block may be a cell-defining SS block (CD-SSB). In an example, a primary cell may be associated with a CD-SSB. The CD-SSB may be located on a synchronization raster. In an example, a cell selection/search and/or reselection may be based on the CD-SSB.
The SS/PBCH block may be used by the UE to determine one or more parameters of the cell. For example, the UE may determine a physical cell identifier (PCI) of the cell based on the sequences of the PSS and the SSS, respectively. The UE may determine a location of a frame boundary of the cell based on the location of the SS/PBCH block. For example, the SS/PBCH block may indicate that it has been transmitted in accordance with a transmission pattern, wherein a SS/PBCH block in the transmission pattern is a known distance from the frame boundary.
The PBCH may use a QPSK modulation and may use forward error correction (FEC). The FEC may use polar coding. One or more symbols spanned by the PBCH may carry one or more DMRSs for demodulation of the PBCH. The PBCH may include an indication of a current system frame number (SFN) of the cell and/or a SS/PBCH block timing index. These parameters may facilitate time synchronization of the UE to the base station. The PBCH may include a master information block (MIB) used to provide the UE with one or more parameters. The MIB may be used by the UE to locate remaining minimum system information (RMSI) associated with the cell. The RMSI may include a System Information Block Type 1 (SIB1). The SIB1 may contain information needed by the UE to access the cell. The UE may use one or more parameters of the MIB to monitor PDCCH, which may be used to schedule PDSCH. The PDSCH may include the SIB1. The SIB1 may be decoded using parameters provided in the MIB. The PBCH may indicate an absence of SIB1. Based on the PBCH indicating the absence of SIB1, the UE may be pointed to a frequency. The UE may search for an SS/PBCH block at the frequency to which the UE is pointed.
The UE may assume that one or more SS/PBCH blocks transmitted with a same SS/PBCH block index are quasi co-located (QCLed) (e.g., having the same/similar Doppler spread, Doppler shift, average gain, average delay, and/or spatial Rx parameters). The UE may not assume QCL for SS/PBCH block transmissions having different SS/PBCH block indices.
SS/PBCH blocks (e.g., those within a half-frame) may be transmitted in spatial directions (e.g., using different beams that span a coverage area of the cell). In an example, a first SS/PBCH block may be transmitted in a first spatial direction using a first beam, and a second SS/PBCH block may be transmitted in a second spatial direction using a second beam.
In an example, within a frequency span of a carrier, a base station may transmit a plurality of SS/PBCH blocks. In an example, a first PCI of a first SS/PBCH block of the plurality of SS/PBCH blocks may be different from a second PCI of a second SS/PBCH block of the plurality of SS/PBCH blocks. The PCIs of SS/PBCH blocks transmitted in different frequency locations may be different or the same.
The CSI-RS may be transmitted by the base station and used by the UE to acquire channel state information (CSI). The base station may configure the UE with one or more CSI-RSs for channel estimation or any other suitable purpose. The base station may configure a UE with one or more of the same/similar CSI-RSs. The UE may measure the one or more CSI-RSs. The UE may estimate a downlink channel state and/or generate a CSI report based on the measuring of the one or more downlink CSI-RSs. The UE may provide the CSI report to the base station. The base station may use feedback provided by the UE (e.g., the estimated downlink channel state) to perform link adaptation.
The base station may semi-statically configure the UE with one or more CSI-RS resource sets. A CSI-RS resource may be associated with a location in the time and frequency domains and a periodicity. The base station may selectively activate and/or deactivate a CSI-RS resource. The base station may indicate to the UE that a CSI-RS resource in the CSI-RS resource set is activated and/or deactivated.
The base station may configure the UE to report CSI measurements. The base station may configure the UE to provide CSI reports periodically, aperiodically, or semi-persistently. For periodic CSI reporting, the UE may be configured with a timing and/or periodicity of a plurality of CSI reports. For aperiodic CSI reporting, the base station may request a CSI report. For example, the base station may command the UE to measure a configured CSI-RS resource and provide a CSI report relating to the measurements. For semi-persistent CSI reporting, the base station may configure the UE to transmit periodically, and selectively activate or deactivate the periodic reporting. The base station may configure the UE with a CSI-RS resource set and CSI reports using RRC signaling.
The CSI-RS configuration may comprise one or more parameters indicating, for example, up to 32 antenna ports. The UE may be configured to employ the same OFDM symbols for a downlink CSI-RS and a control resource set (CORESET) when the downlink CSI-RS and CORESET are spatially QCLed and resource elements associated with the downlink CSI-RS are outside of the physical resource blocks (PRBs) configured for the CORESET. The UE may be configured to employ the same OFDM symbols for downlink CSI-RS and SS/PBCH blocks when the downlink CSI-RS and SS/PBCH blocks are spatially QCLed and resource elements associated with the downlink CSI-RS are outside of PRBs configured for the SS/PBCH blocks.
Downlink DMRSs may be transmitted by a base station and used by a UE for channel estimation. For example, the downlink DMRS may be used for coherent demodulation of one or more downlink physical channels (e.g., PDSCH). An NR network may support one or more variable and/or configurable DMRS patterns for data demodulation. At least one downlink DMRS configuration may support a front-loaded DMRS pattern. A front-loaded DMRS may be mapped over one or more OFDM symbols (e.g., one or two adjacent OFDM symbols). A base station may semi-statically configure the UE with a number (e.g., a maximum number) of front-loaded DMRS symbols for PDSCH. A DMRS configuration may support one or more DMRS ports. For example, for single user-MIMO, a DMRS configuration may support up to eight orthogonal downlink DMRS ports per UE. For multiuser-MIMO, a DMRS configuration may support up to 4 orthogonal downlink DMRS ports per UE. A radio network may support (e.g., at least for CP-OFDM) a common DMRS structure for downlink and uplink, wherein a DMRS location, a DMRS pattern, and/or a scrambling sequence may be the same or different. The base station may transmit a downlink DMRS and a corresponding PDSCH using the same precoding matrix. The UE may use the one or more downlink DMRSs for coherent demodulation/channel estimation of the PDSCH.
In an example, a transmitter (e.g., a base station) may use a precoder matrices for a part of a transmission bandwidth. For example, the transmitter may use a first precoder matrix for a first bandwidth and a second precoder matrix for a second bandwidth. The first precoder matrix and the second precoder matrix may be different based on the first bandwidth being different from the second bandwidth. The UE may assume that a same precoding matrix is used across a set of PRBs. The set of PRBs may be denoted as a precoding resource block group (PRG).
A PDSCH may comprise one or more layers. The UE may assume that at least one symbol with DMRS is present on a layer of the one or more layers of the PDSCH. A higher layer may configure up to 3 DMRSs for the PDSCH.
Downlink PT-RS may be transmitted by a base station and used by a UE for phase-noise compensation. Whether a downlink PT-RS is present or not may depend on an RRC configuration. The presence and/or pattern of the downlink PT-RS may be configured on a UE-specific basis using a combination of RRC signaling and/or an association with one or more parameters employed for other purposes (e.g., modulation and coding scheme (MCS)), which may be indicated by DCI. When configured, a dynamic presence of a downlink PT-RS may be associated with one or more DCI parameters comprising at least MCS. An NR network may support a plurality of PT-RS densities defined in the time and/or frequency domains. When present, a frequency domain density may be associated with at least one configuration of a scheduled bandwidth. The UE may assume a same precoding for a DMRS port and a PT-RS port. A number of PT-RS ports may be fewer than a number of DMRS ports in a scheduled resource. Downlink PT-RS may be confined in the scheduled time/frequency duration for the UE. Downlink PT-RS may be transmitted on symbols to facilitate phase tracking at the receiver.
The UE may transmit an uplink DMRS to a base station for channel estimation. For example, the base station may use the uplink DMRS for coherent demodulation of one or more uplink physical channels. For example, the UE may transmit an uplink DMRS with a PUSCH and/or a PUCCH. The uplink DM-RS may span a range of frequencies that is similar to a range of frequencies associated with the corresponding physical channel. The base station may configure the UE with one or more uplink DMRS configurations. At least one DMRS configuration may support a front-loaded DMRS pattern. The front-loaded DMRS may be mapped over one or more OFDM symbols (e.g., one or two adjacent OFDM symbols). One or more uplink DMRSs may be configured to transmit at one or more symbols of a PUSCH and/or a PUCCH. The base station may semi-statically configure the UE with a number (e.g., maximum number) of front-loaded DMRS symbols for the PUSCH and/or the PUCCH, which the UE may use to schedule a single-symbol DMRS and/or a double-symbol DMRS. An NR network may support (e.g., for cyclic prefix orthogonal frequency division multiplexing (CP-OFDM)) a common DMRS structure for downlink and uplink, wherein a DMRS location, a DMRS pattern, and/or a scrambling sequence for the DMRS may be the same or different.
A PUSCH may comprise one or more layers, and the UE may transmit at least one symbol with DMRS present on a layer of the one or more layers of the PUSCH. In an example, a higher layer may configure up to three DMRSs for the PUSCH.
Uplink PT-RS (which may be used by a base station for phase tracking and/or phase-noise compensation) may or may not be present depending on an RRC configuration of the UE. The presence and/or pattern of uplink PT-RS may be configured on a UE-specific basis by a combination of RRC signaling and/or one or more parameters employed for other purposes (e.g., Modulation and Coding Scheme (MCS)), which may be indicated by DCI. When configured, a dynamic presence of uplink PT-RS may be associated with one or more DCI parameters comprising at least MCS. A radio network may support a plurality of uplink PT-RS densities defined in time/frequency domain. When present, a frequency domain density may be associated with at least one configuration of a scheduled bandwidth. The UE may assume a same precoding for a DMRS port and a PT-RS port. A number of PT-RS ports may be fewer than a number of DMRS ports in a scheduled resource. For example, uplink PT-RS may be confined in the scheduled time/frequency duration for the UE.
SRS may be transmitted by a UE to a base station for channel state estimation to support uplink channel dependent scheduling and/or link adaptation. SRS transmitted by the UE may allow a base station to estimate an uplink channel state at one or more frequencies. A scheduler at the base station may employ the estimated uplink channel state to assign one or more resource blocks for an uplink PUSCH transmission from the UE. The base station may semi-statically configure the UE with one or more SRS resource sets. For an SRS resource set, the base station may configure the UE with one or more SRS resources. An SRS resource set applicability may be configured by a higher layer (e.g., RRC) parameter. For example, when a higher layer parameter indicates beam management, an SRS resource in a SRS resource set of the one or more SRS resource sets (e.g., with the same/similar time domain behavior, periodic, aperiodic, and/or the like) may be transmitted at a time instant (e.g., simultaneously). The UE may transmit one or more SRS resources in SRS resource sets. An NR network may support aperiodic, periodic and/or semi-persistent SRS transmissions. The UE may transmit SRS resources based on one or more trigger types, wherein the one or more trigger types may comprise higher layer signaling (e.g., RRC) and/or one or more DCI formats. In an example, at least one DCI format may be employed for the UE to select at least one of one or more configured SRS resource sets. An SRS trigger type 0 may refer to an SRS triggered based on a higher layer signaling. An SRS trigger type 1 may refer to an SRS triggered based on one or more DCI formats. In an example, when PUSCH and SRS are transmitted in a same slot, the UE may be configured to transmit SRS after a transmission of a PUSCH and a corresponding uplink DMRS.
The base station may semi-statically configure the UE with one or more SRS configuration parameters indicating at least one of following: a SRS resource configuration identifier; a number of SRS ports; time domain behavior of an SRS resource configuration (e.g., an indication of periodic, semi-persistent, or aperiodic SRS); slot, mini-slot, and/or subframe level periodicity; offset for a periodic and/or an aperiodic SRS resource; a number of OFDM symbols in an SRS resource; a starting OFDM symbol of an SRS resource; an SRS bandwidth; a frequency hopping bandwidth; a cyclic shift; and/or an SRS sequence ID.
An antenna port is defined such that the channel over which a symbol on the antenna port is conveyed can be inferred from the channel over which another symbol on the same antenna port is conveyed. If a first symbol and a second symbol are transmitted on the same antenna port, the receiver may infer the channel (e.g., fading gain, multipath delay, and/or the like) for conveying the second symbol on the antenna port, from the channel for conveying the first symbol on the antenna port. A first antenna port and a second antenna port may be referred to as quasi co-located (QCLed) if one or more large-scale properties of the channel over which a first symbol on the first antenna port is conveyed may be inferred from the channel over which a second symbol on a second antenna port is conveyed. The one or more large-scale properties may comprise at least one of: a delay spread; a Doppler spread; a Doppler shift; an average gain; an average delay; and/or spatial Receiving (Rx) parameters.
Channels that use beamforming require beam management. Beam management may comprise beam measurement, beam selection, and beam indication. A beam may be associated with one or more reference signals. For example, a beam may be identified by one or more beamformed reference signals. The UE may perform downlink beam measurement based on downlink reference signals (e.g., a channel state information reference signal (CSI-RS)) and generate a beam measurement report. The UE may perform the downlink beam measurement procedure after an RRC connection is set up with a base station.
FIG. 11B illustrates an example of channel state information reference signals (CSI-RSs) that are mapped in the time and frequency domains. A square shown in FIG. 11B may span a resource block (RB) within a bandwidth of a cell. A base station may transmit one or more RRC messages comprising CSI-RS resource configuration parameters indicating one or more CSI-RSs. One or more of the following parameters may be configured by higher layer signaling (e.g., RRC and/or MAC signaling) for a CSI-RS resource configuration: a CSI-RS resource configuration identity, a number of CSI-RS ports, a CSI-RS configuration (e.g., symbol and resource element (RE) locations in a subframe), a CSI-RS subframe configuration (e.g., subframe location, offset, and periodicity in a radio frame), a CSI-RS power parameter, a CSI-RS sequence parameter, a code division multiplexing (CDM) type parameter, a frequency density, a transmission comb, quasi co-location (QCL) parameters (e.g., QCL-scramblingidentity, crs-portscount, mbsfn-subframeconfiglist, csi-rs-configZPid, qcl-csi-rs-configNZPid), and/or other radio resource parameters.
The three beams illustrated in FIG. 11B may be configured for a UE in a UE-specific configuration. Three beams are illustrated in FIG. 11B (beam #1, beam #2, and beam #3), more or fewer beams may be configured. Beam #1 may be allocated with CSI-RS 1101 that may be transmitted in one or more subcarriers in an RB of a first symbol. Beam #2 may be allocated with CSI-RS 1102 that may be transmitted in one or more subcarriers in an RB of a second symbol. Beam #3 may be allocated with CSI-RS 1103 that may be transmitted in one or more subcarriers in an RB of a third symbol. By using frequency division multiplexing (FDM), a base station may use other subcarriers in a same RB (for example, those that are not used to transmit CSI-RS 1101) to transmit another CSI-RS associated with a beam for another UE. By using time domain multiplexing (TDM), beams used for the UE may be configured such that beams for the UE use symbols from beams of other UEs.
CSI-RSs such as those illustrated in FIG. 11B (e.g., CSI-RS 1101, 1102, 1103) may be transmitted by the base station and used by the UE for one or more measurements. For example, the UE may measure a reference signal received power (RSRP) of configured CSI-RS resources. The base station may configure the UE with a reporting configuration and the UE may report the RSRP measurements to a network (for example, via one or more base stations) based on the reporting configuration. In an example, the base station may determine, based on the reported measurement results, one or more transmission configuration indication (TCI) states comprising a number of reference signals. In an example, the base station may indicate one or more TCI states to the UE (e.g., via an RRC signaling, a MAC CE, and/or a DCI). The UE may receive a downlink transmission with a receive (Rx) beam determined based on the one or more TCI states. In an example, the UE may or may not have a capability of beam correspondence. If the UE has the capability of beam correspondence, the UE may determine a spatial domain filter of a transmit (Tx) beam based on a spatial domain filter of the corresponding Rx beam. If the UE does not have the capability of beam correspondence, the UE may perform an uplink beam selection procedure to determine the spatial domain filter of the Tx beam. The UE may perform the uplink beam selection procedure based on one or more sounding reference signal (SRS) resources configured to the UE by the base station. The base station may select and indicate uplink beams for the UE based on measurements of the one or more SRS resources transmitted by the UE.
In a beam management procedure, a UE may assess (e.g., measure) a channel quality of one or more beam pair links, a beam pair link comprising a transmitting beam transmitted by a base station and a receiving beam received by the UE. Based on the assessment, the UE may transmit a beam measurement report indicating one or more beam pair quality parameters comprising, e.g., one or more beam identifications (e.g., a beam index, a reference signal index, or the like), RSRP, a precoding matrix indicator (PMI), a channel quality indicator (CQI), and/or a rank indicator (RI).
FIG. 12A illustrates examples of three downlink beam management procedures: P1, P2, and P3. Procedure P1 may enable a UE measurement on transmit (Tx) beams of a transmission reception point (TRP) (or multiple TRPs), e.g., to support a selection of one or more base station Tx beams and/or UE Rx beams (shown as ovals in the top row and bottom row, respectively, of P1). Beamforming at a TRP may comprise a Tx beam sweep for a set of beams (shown, in the top rows of P1 and P2, as ovals rotated in a counter-clockwise direction indicated by the dashed arrow). Beamforming at a UE may comprise an Rx beam sweep for a set of beams (shown, in the bottom rows of P1 and P3, as ovals rotated in a clockwise direction indicated by the dashed arrow). Procedure P2 may be used to enable a UE measurement on Tx beams of a TRP (shown, in the top row of P2, as ovals rotated in a counter-clockwise direction indicated by the dashed arrow). The UE and/or the base station may perform procedure P2 using a smaller set of beams than is used in procedure P1, or using narrower beams than the beams used in procedure P1. This may be referred to as beam refinement. The UE may perform procedure P3 for Rx beam determination by using the same Tx beam at the base station and sweeping an Rx beam at the UE.
FIG. 12B illustrates examples of three uplink beam management procedures: U1, U2, and U3. Procedure U1 may be used to enable a base station to perform a measurement on Tx beams of a UE, e.g., to support a selection of one or more UE Tx beams and/or base station Rx beams (shown as ovals in the top row and bottom row, respectively, of U1). Beamforming at the UE may include, e.g., a Tx beam sweep from a set of beams (shown in the bottom rows of U1 and U3 as ovals rotated in a clockwise direction indicated by the dashed arrow). Beamforming at the base station may include, e.g., an Rx beam sweep from a set of beams (shown, in the top rows of U1 and U2, as ovals rotated in a counter-clockwise direction indicated by the dashed arrow). Procedure U2 may be used to enable the base station to adjust its Rx beam when the UE uses a fixed Tx beam. The UE and/or the base station may perform procedure U2 using a smaller set of beams than is used in procedure P1, or using narrower beams than the beams used in procedure P1. This may be referred to as beam refinement The UE may perform procedure U3 to adjust its Tx beam when the base station uses a fixed Rx beam.
A UE may initiate a beam failure recovery (BFR) procedure based on detecting a beam failure. The UE may transmit a BFR request (e.g., a preamble, a UCI, an SR, a MAC CE, and/or the like) based on the initiating of the BFR procedure. The UE may detect the beam failure based on a determination that a quality of beam pair link(s) of an associated control channel is unsatisfactory (e.g., having an error rate higher than an error rate threshold, a received signal power lower than a received signal power threshold, an expiration of a timer, and/or the like).
The UE may measure a quality of a beam pair link using one or more reference signals (RSs) comprising one or more SS/PBCH blocks, one or more CSI-RS resources, and/or one or more demodulation reference signals (DMRSs). A quality of the beam pair link may be based on one or more of a block error rate (BLER), an RSRP value, a signal to interference plus noise ratio (SINR) value, a reference signal received quality (RSRQ) value, and/or a CSI value measured on RS resources. The base station may indicate that an RS resource is quasi co-located (QCLed) with one or more DM-RSs of a channel (e.g., a control channel, a shared data channel, and/or the like). The RS resource and the one or more DMRSs of the channel may be QCLed when the channel characteristics (e.g., Doppler shift, Doppler spread, average delay, delay spread, spatial Rx parameter, fading, and/or the like) from a transmission via the RS resource to the UE are similar or the same as the channel characteristics from a transmission via the channel to the UE.
A network (e.g., a gNB and/or an ng-eNB of a network) and/or the UE may initiate a random access procedure. A UE in an RRC_IDLE state and/or an RRC_INACTIVE state may initiate the random access procedure to request a connection setup to a network. The UE may initiate the random access procedure from an RRC_CONNECTED state. The UE may initiate the random access procedure to request uplink resources (e.g., for uplink transmission of an SR when there is no PUCCH resource available) and/or acquire uplink timing (e.g., when uplink synchronization status is non-synchronized). The UE may initiate the random access procedure to request one or more system information blocks (SIBs) (e.g., other system information such as SIB2, SIB3, and/or the like). The UE may initiate the random access procedure for a beam failure recovery request. A network may initiate a random access procedure for a handover and/or for establishing time alignment for an SCell addition.
FIG. 13A illustrates a four-step contention-based random access procedure. Prior to initiation of the procedure, a base station may transmit a configuration message 1310 to the UE. The procedure illustrated in FIG. 13A comprises transmission of four messages: a Msg 1 1311, a Msg 2 1312, a Msg 3 1313, and a Msg 4 1314. The Msg 1 1311 may include and/or be referred to as a preamble (or a random access preamble). The Msg 2 1312 may include and/or be referred to as a random access response (RAR).
The configuration message 1310 may be transmitted, for example, using one or more RRC messages. The one or more RRC messages may indicate one or more random access channel (RACH) parameters to the UE. The one or more RACH parameters may comprise at least one of following: general parameters for one or more random access procedures (e.g., RACH-configGeneral); cell-specific parameters (e.g., RACH-ConfigCommon); and/or dedicated parameters (e.g., RACH-configDedicated). The base station may broadcast or multicast the one or more RRC messages to one or more UEs. The one or more RRC messages may be UE-specific (e.g., dedicated RRC messages transmitted to a UE in an RRC_CONNECTED state and/or in an RRC_INACTIVE state). The UE may determine, based on the one or more RACH parameters, a time-frequency resource and/or an uplink transmit power for transmission of the Msg 1 1311 and/or the Msg 3 1313. Based on the one or more RACH parameters, the UE may determine a reception timing and a downlink channel for receiving the Msg 2 1312 and the Msg 4 1314.
The one or more RACH parameters provided in the configuration message 1310 may indicate one or more Physical RACH (PRACH) occasions available for transmission of the Msg 1 1311. The one or more PRACH occasions may be predefined. The one or more RACH parameters may indicate one or more available sets of one or more PRACH occasions (e.g., prach-ConfigIndex). The one or more RACH parameters may indicate an association between (a) one or more PRACH occasions and (b) one or more reference signals. The one or more RACH parameters may indicate an association between (a) one or more preambles and (b) one or more reference signals. The one or more reference signals may be SS/PBCH blocks and/or CSI-RSs. For example, the one or more RACH parameters may indicate a number of SS/PBCH blocks mapped to a PRACH occasion and/or a number of preambles mapped to a SS/PBCH blocks.
The one or more RACH parameters provided in the configuration message 1310 may be used to determine an uplink transmit power of Msg 1 1311 and/or Msg 3 1313. For example, the one or more RACH parameters may indicate a reference power for a preamble transmission (e.g., a received target power and/or an initial power of the preamble transmission). There may be one or more power offsets indicated by the one or more RACH parameters. For example, the one or more RACH parameters may indicate: a power ramping step; a power offset between SSB and CSI-RS; a power offset between transmissions of the Msg 1 1311 and the Msg 3 1313; and/or a power offset value between preamble groups. The one or more RACH parameters may indicate one or more thresholds based on which the UE may determine at least one reference signal (e.g., an SSB and/or CSI-RS) and/or an uplink carrier (e.g., a normal uplink (NUL) carrier and/or a supplemental uplink (SUL) carrier).
The Msg 1 1311 may include one or more preamble transmissions (e.g., a preamble transmission and one or more preamble retransmissions). An RRC message may be used to configure one or more preamble groups (e.g., group A and/or group B). A preamble group may comprise one or more preambles. The UE may determine the preamble group based on a pathloss measurement and/or a size of the Msg 3 1313. The UE may measure an RSRP of one or more reference signals (e.g., SSBs and/or CSI-RSs) and determine at least one reference signal having an RSRP above an RSRP threshold (e.g., rsrp-ThresholdSSB and/or rsrp-ThresholdCSI-RS). The UE may select at least one preamble associated with the one or more reference signals and/or a selected preamble group, for example, if the association between the one or more preambles and the at least one reference signal is configured by an RRC message.
The UE may determine the preamble based on the one or more RACH parameters provided in the configuration message 1310. For example, the UE may determine the preamble based on a pathloss measurement, an RSRP measurement, and/or a size of the Msg 3 1313. As another example, the one or more RACH parameters may indicate: a preamble format; a maximum number of preamble transmissions; and/or one or more thresholds for determining one or more preamble groups (e.g., group A and group B). A base station may use the one or more RACH parameters to configure the UE with an association between one or more preambles and one or more reference signals (e.g., SSBs and/or CSI-RSs). If the association is configured, the UE may determine the preamble to include in Msg 1 1311 based on the association. The Msg 1 1311 may be transmitted to the base station via one or more PRACH occasions. The UE may use one or more reference signals (e.g., SSBs and/or CSI-RSs) for selection of the preamble and for determining of the PRACH occasion. One or more RACH parameters (e.g., ra-ssb-OccasionMskIndex and/or ra-OccasionList) may indicate an association between the PRACH occasions and the one or more reference signals.
The UE may perform a preamble retransmission if no response is received following a preamble transmission. The UE may increase an uplink transmit power for the preamble retransmission. The UE may select an initial preamble transmit power based on a pathloss measurement and/or a target received preamble power configured by the network. The UE may determine to retransmit a preamble and may ramp up the uplink transmit power. The UE may receive one or more RACH parameters (e.g., PREAMBLE_POWER_RAMPING_STEP) indicating a ramping step for the preamble retransmission. The ramping step may be an amount of incremental increase in uplink transmit power for a retransmission. The UE may ramp up the uplink transmit power if the UE determines a reference signal (e.g., SSB and/or CSI-RS) that is the same as a previous preamble transmission. The UE may count a number of preamble transmissions and/or retransmissions (e.g., PREAMBLE_TRANSMISSION_COUNTER). The UE may determine that a random access procedure completed unsuccessfully, for example, if the number of preamble transmissions exceeds a threshold configured by the one or more RACH parameters (e.g., preambleTransMax).
The Msg 2 1312 received by the UE may include an RAR. In some scenarios, the Msg 2 1312 may include multiple RARs corresponding to multiple UEs. The Msg 2 1312 may be received after or in response to the transmitting of the Msg 1 1311. The Msg 2 1312 may be scheduled on the DL-SCH and indicated on a PDCCH using a random access RNTI (RA-RNTI). The Msg 2 1312 may indicate that the Msg 1 1311 was received by the base station. The Msg 2 1312 may include a time-alignment command that may be used by the UE to adjust the UE's transmission timing, a scheduling grant for transmission of the Msg 3 1313, and/or a Temporary Cell RNTI (TC-RNTI). After transmitting a preamble, the UE may start a time window (e.g., ra-ResponseWindow) to monitor a PDCCH for the Msg 2 1312. The UE may determine when to start the time window based on a PRACH occasion that the UE uses to transmit the preamble. For example, the UE may start the time window one or more symbols after a last symbol of the preamble (e.g., at a first PDCCH occasion from an end of a preamble transmission). The one or more symbols may be determined based on a numerology. The PDCCH may be in a common search space (e.g., a Type1-PDCCH common search space) configured by an RRC message. The UE may identify the RAR based on a Radio Network Temporary Identifier (RNTI). RNTIs may be used depending on one or more events initiating the random access procedure. The UE may use random access RNTI (RA-RNTI). The RA-RNTI may be associated with PRACH occasions in which the UE transmits a preamble. For example, the UE may determine the RA-RNTI based on: an OFDM symbol index; a slot index; a frequency domain index; and/or a UL carrier indicator of the PRACH occasions. An example of RA-RNTI may be as follows:
RA-RNTI=1+s_id+14×t_id+14×80×f_id+14×80×8×ul_carrier_id
where s_id may be an index of a first OFDM symbol of the PRACH occasion (e.g., 0≤s_id<14), t_id may be an index of a first slot of the PRACH occasion in a system frame (e.g., 0≤t_id<80), f_id may be an index of the PRACH occasion in the frequency domain (e.g., 0≤f_id<8), and ul_carrier_id may be a UL carrier used for a preamble transmission (e.g., 0 for an NUL carrier, and 1 for an SUL carrier).
The UE may transmit the Msg 3 1313 in response to a successful reception of the Msg 2 1312 (e.g., using resources identified in the Msg 2 1312). The Msg 3 1313 may be used for contention resolution in, for example, the contention-based random access procedure illustrated in FIG. 13A. In some scenarios, a plurality of UEs may transmit a same preamble to a base station and the base station may provide an RAR that corresponds to a UE. Collisions may occur if the plurality of UEs interpret the RAR as corresponding to themselves. Contention resolution (e.g., using the Msg 3 1313 and the Msg 4 1314) may be used to increase the likelihood that the UE does not incorrectly use an identity of another the UE. To perform contention resolution, the UE may include a device identifier in the Msg 3 1313 (e.g., a C-RNTI if assigned, a TC-RNTI included in the Msg 2 1312, and/or any other suitable identifier).
The Msg 4 1314 may be received after or in response to the transmitting of the Msg 3 1313. If a C-RNTI was included in the Msg 3 1313, the base station will address the UE on the PDCCH using the C-RNTI. If the UE's unique C-RNTI is detected on the PDCCH, the random access procedure is determined to be successfully completed. If a TC-RNTI is included in the Msg 3 1313 (e.g., if the UE is in an RRC_IDLE state or not otherwise connected to the base station), Msg 4 1314 will be received using a DL-SCH associated with the TC-RNTI. If a MAC PDU is successfully decoded and a MAC PDU comprises the UE contention resolution identity MAC CE that matches or otherwise corresponds with the CCCH SDU sent (e.g., transmitted) in Msg 3 1313, the UE may determine that the contention resolution is successful and/or the UE may determine that the random access procedure is successfully completed.
The UE may be configured with a supplementary uplink (SUL) carrier and a normal uplink (NUL) carrier. An initial access (e.g., random access procedure) may be supported in an uplink carrier. For example, a base station may configure the UE with two separate RACH configurations: one for an SUL carrier and the other for an NUL carrier. For random access in a cell configured with an SUL carrier, the network may indicate which carrier to use (NUL or SUL). The UE may determine the SUL carrier, for example, if a measured quality of one or more reference signals is lower than a broadcast threshold. Uplink transmissions of the random access procedure (e.g., the Msg 1 1311 and/or the Msg 31313) may remain on the selected carrier. The UE may switch an uplink carrier during the random access procedure (e.g., between the Msg 1 1311 and the Msg 3 1313) in one or more cases. For example, the UE may determine and/or switch an uplink carrier for the Msg 1 1311 and/or the Msg 3 1313 based on a channel clear assessment (e.g., a listen-before-talk).
FIG. 13B illustrates a two-step contention-free random access procedure. Similar to the four-step contention-based random access procedure illustrated in FIG. 13A, a base station may, prior to initiation of the procedure, transmit a configuration message 1320 to the UE. The configuration message 1320 may be analogous in some respects to the configuration message 1310. The procedure illustrated in FIG. 13B comprises transmission of two messages: a Msg 1 1321 and a Msg 2 1322. The Msg 1 1321 and the Msg 2 1322 may be analogous in some respects to the Msg 1 1311 and a Msg 2 1312 illustrated in FIG. 13A, respectively. As will be understood from FIGS. 13A and 13B, the contention-free random access procedure may not include messages analogous to the Msg 3 1313 and/or the Msg 4 1314.
The contention-free random access procedure illustrated in FIG. 13B may be initiated for a beam failure recovery, other SI request, SCell addition, and/or handover. For example, a base station may indicate or assign to the UE the preamble to be used for the Msg 1 1321. The UE may receive, from the base station via PDCCH and/or RRC, an indication of a preamble (e.g., ra-PreambleIndex).
After transmitting a preamble, the UE may start a time window (e.g., ra-ResponseWindow) to monitor a PDCCH for the RAR. In the event of a beam failure recovery request, the base station may configure the UE with a separate time window and/or a separate PDCCH in a search space indicated by an RRC message (e.g., recoverySearchSpaceId). The UE may monitor for a PDCCH transmission addressed to a Cell RNTI (C-RNTI) on the search space. In the contention-free random access procedure illustrated in FIG. 13B, the UE may determine that a random access procedure successfully completes after or in response to transmission of Msg 1 1321 and reception of a corresponding Msg 2 1322. The UE may determine that a random access procedure successfully completes, for example, if a PDCCH transmission is addressed to a C-RNTI. The UE may determine that a random access procedure successfully completes, for example, if the UE receives an RAR comprising a preamble identifier corresponding to a preamble transmitted by the UE and/or the RAR comprises a MAC sub-PDU with the preamble identifier. The UE may determine the response as an indication of an acknowledgement for an SI request.
FIG. 13C illustrates another two-step random access procedure. Similar to the random access procedures illustrated in FIGS. 13A and 13B, a base station may, prior to initiation of the procedure, transmit a configuration message 1330 to the UE. The configuration message 1330 may be analogous in some respects to the configuration message 1310 and/or the configuration message 1320. The procedure illustrated in FIG. 13C comprises transmission of two messages: a Msg A 1331 and a Msg B 1332.
Msg A 1331 may be transmitted in an uplink transmission by the UE. Msg A 1331 may comprise one or more transmissions of a preamble 1341 and/or one or more transmissions of a transport block 1342. The transport block 1342 may comprise contents that are similar and/or equivalent to the contents of the Msg 3 1313 illustrated in FIG. 13A. The transport block 1342 may comprise UCI (e.g., an SR, a HARQ ACK/NACK, and/or the like). The UE may receive the Msg B 1332 after or in response to transmitting the Msg A 1331. The Msg B 1332 may comprise contents that are similar and/or equivalent to the contents of the Msg 2 1312 (e.g., an RAR) illustrated in FIGS. 13A and 13B and/or the Msg 4 1314 illustrated in FIG. 13A.
The UE may initiate the two-step random access procedure in FIG. 13C for licensed spectrum and/or unlicensed spectrum. The UE may determine, based on one or more factors, whether to initiate the two-step random access procedure. The one or more factors may be: a radio access technology in use (e.g., LTE, NR, and/or the like); whether the UE has valid TA or not; a cell size; the UE's RRC state; a type of spectrum (e.g., licensed vs. unlicensed); and/or any other suitable factors.
The UE may determine, based on two-step RACH parameters included in the configuration message 1330, a radio resource and/or an uplink transmit power for the preamble 1341 and/or the transport block 1342 included in the Msg A 1331. The RACH parameters may indicate a modulation and coding schemes (MCS), a time-frequency resource, and/or a power control for the preamble 1341 and/or the transport block 1342. A time-frequency resource for transmission of the preamble 1341 (e.g., a PRACH) and a time-frequency resource for transmission of the transport block 1342 (e.g., a PUSCH) may be multiplexed using FDM, TDM, and/or CDM. The RACH parameters may enable the UE to determine a reception timing and a downlink channel for monitoring for and/or receiving Msg B 1332.
The transport block 1342 may comprise data (e.g., delay-sensitive data), an identifier of the UE, security information, and/or device information (e.g., an International Mobile Subscriber Identity (IMSI)). The base station may transmit the Msg B 1332 as a response to the Msg A 1331. The Msg B 1332 may comprise at least one of following: a preamble identifier; a timing advance command; a power control command; an uplink grant (e.g., a radio resource assignment and/or an MCS); a UE identifier for contention resolution; and/or an RNTI (e.g., a C-RNTI or a TC-RNTI). The UE may determine that the two-step random access procedure is successfully completed if: a preamble identifier in the Msg B 1332 is matched to a preamble transmitted by the UE; and/or the identifier of the UE in Msg B 1332 is matched to the identifier of the UE in the Msg A 1331 (e.g., the transport block 1342).
A UE and a base station may exchange control signaling. The control signaling may be referred to as L1/L2 control signaling and may originate from the PHY layer (e.g., layer 1) and/or the MAC layer (e.g., layer 2). The control signaling may comprise downlink control signaling transmitted from the base station to the UE and/or uplink control signaling transmitted from the UE to the base station.
The downlink control signaling may comprise: a downlink scheduling assignment; an uplink scheduling grant indicating uplink radio resources and/or a transport format; a slot format information; a preemption indication; a power control command; and/or any other suitable signaling. The UE may receive the downlink control signaling in a payload transmitted by the base station on a physical downlink control channel (PDCCH). The payload transmitted on the PDCCH may be referred to as downlink control information (DCI). In some scenarios, the PDCCH may be a group common PDCCH (GC-PDCCH) that is common to a group of UEs.
A base station may attach one or more cyclic redundancy check (CRC) parity bits to a DCI in order to facilitate detection of transmission errors. When the DCI is intended for a UE (or a group of the UEs), the base station may scramble the CRC parity bits with an identifier of the UE (or an identifier of the group of the UEs). Scrambling the CRC parity bits with the identifier may comprise Modulo-2 addition (or an exclusive OR operation) of the identifier value and the CRC parity bits. The identifier may comprise a 16-bit value of a radio network temporary identifier (RNTI).
DCIs may be used for different purposes. A purpose may be indicated by the type of RNTI used to scramble the CRC parity bits. For example, a DCI having CRC parity bits scrambled with a paging RNTI (P-RNTI) may indicate paging information and/or a system information change notification. The P-RNTI may be predefined as “FFFE” in hexadecimal. A DCI having CRC parity bits scrambled with a system information RNTI (SI-RNTI) may indicate a broadcast transmission of the system information. The SI-RNTI may be predefined as “FFFF” in hexadecimal. A DCI having CRC parity bits scrambled with a random access RNTI (RA-RNTI) may indicate a random access response (RAR). A DCI having CRC parity bits scrambled with a cell RNTI (C-RNTI) may indicate a dynamically scheduled unicast transmission and/or a triggering of PDCCH-ordered random access. A DCI having CRC parity bits scrambled with a temporary cell RNTI (TC-RNTI) may indicate a contention resolution (e.g., a Msg 3 analogous to the Msg 3 1313 illustrated in FIG. 13A). Other RNTIs configured to the UE by a base station may comprise a Configured Scheduling RNTI (CS-RNTI), a Transmit Power Control-PUCCH RNTI (TPC-PUCCH-RNTI), a Transmit Power Control-PUSCH RNTI (TPC-PUSCH-RNTI), a Transmit Power Control-SRS RNTI (TPC-SRS-RNTI), an Interruption RNTI (INT-RNTI), a Slot Format Indication RNTI (SFI-RNTI), a Semi-Persistent CSI RNTI (SP-CSI-RNTI), a Modulation and Coding Scheme Cell RNTI (MCS-C-RNTI), and/or the like.
Depending on the purpose and/or content of a DCI, the base station may transmit the DCIs with one or more DCI formats. For example, DCI format 00 may be used for scheduling of PUSCH in a cell. DCI format 00 may be a fallback DCI format (e.g., with compact DCI payloads). DCI format 01 may be used for scheduling of PUSCH in a cell (e.g., with more DCI payloads than DCI format 0_0). DCI format 1_0 may be used for scheduling of PDSCH in a cell. DCI format 1_0 may be a fallback DCI format (e.g., with compact DCI payloads). DCI format 1_1 may be used for scheduling of PDSCH in a cell (e.g., with more DCI payloads than DCI format 1_0). DCI format 2_0 may be used for providing a slot format indication to a group of UEs. DCI format 2_1 may be used for notifying a group of UEs of a physical resource block and/or OFDM symbol where the UE may assume no transmission is intended to the UE. DCI format 2_2 may be used for transmission of a transmit power control (TPC) command for PUCCH or PUSCH. DCI format 2_3 may be used for transmission of a group of TPC commands for SRS transmissions by one or more UEs. DCI format(s) for new functions may be defined in future releases. DCI formats may have different DCI sizes, or may share the same DCI size.
After scrambling a DCI with a RNTI, the base station may process the DCI with channel coding (e.g., polar coding), rate matching, scrambling and/or QPSK modulation. A base station may map the coded and modulated DCI on resource elements used and/or configured for a PDCCH. Based on a payload size of the DCI and/or a coverage of the base station, the base station may transmit the DCI via a PDCCH occupying a number of contiguous control channel elements (CCEs). The number of the contiguous CCEs (referred to as aggregation level) may be 1, 2, 4, 8, 16, and/or any other suitable number. A CCE may comprise a number (e.g., 6) of resource-element groups (REGs). A REG may comprise a resource block in an OFDM symbol. The mapping of the coded and modulated DCI on the resource elements may be based on mapping of CCEs and REGs (e.g., CCE-to-REG mapping).
FIG. 14A illustrates an example of CORESET configurations for a bandwidth part. The base station may transmit a DCI via a PDCCH on one or more control resource sets (CORESETs). A CORESET may comprise a time-frequency resource in which the UE tries to decode a DCI using one or more search spaces. The base station may configure a CORESET in the time-frequency domain. In the example of FIG. 14A, a first CORESET 1401 and a second CORESET 1402 occur at the first symbol in a slot. The first CORESET 1401 overlaps with the second CORESET 1402 in the frequency domain. A third CORESET 1403 occurs at a third symbol in the slot. A fourth CORESET 1404 occurs at the seventh symbol in the slot. CORESETs may have a different number of resource blocks in frequency domain.
FIG. 14B illustrates an example of a CCE-to-REG mapping for DCI transmission on a CORESET and PDCCH processing. The CCE-to-REG mapping may be an interleaved mapping (e.g., for the purpose of providing frequency diversity) or a non-interleaved mapping (e.g., for the purposes of facilitating interference coordination and/or frequency-selective transmission of control channels). The base station may perform different or same CCE-to-REG mapping on different CORESETs. A CORESET may be associated with a CCE-to-REG mapping by RRC configuration. A CORESET may be configured with an antenna port quasi co-location (QCL) parameter. The antenna port QCL parameter may indicate QCL information of a demodulation reference signal (DMRS) for PDCCH reception in the CORESET.
The base station may transmit, to the UE, RRC messages comprising configuration parameters of one or more CORESETs and one or more search space sets. The configuration parameters may indicate an association between a search space set and a CORESET. A search space set may comprise a set of PDCCH candidates formed by CCEs at a given aggregation level. The configuration parameters may indicate: a number of PDCCH candidates to be monitored per aggregation level; a PDCCH monitoring periodicity and a PDCCH monitoring pattern; one or more DCI formats to be monitored by the UE; and/or whether a search space set is a common search space set or a UE-specific search space set. A set of CCEs in the common search space set may be predefined and known to the UE. A set of CCEs in the UE-specific search space set may be configured based on the UE's identity (e.g., C-RNTI).
As shown in FIG. 14B, the UE may determine a time-frequency resource for a CORESET based on RRC messages. The UE may determine a CCE-to-REG mapping (e.g., interleaved or non-interleaved, and/or mapping parameters) for the CORESET based on configuration parameters of the CORESET. The UE may determine a number (e.g., at most 10) of search space sets configured on the CORESET based on the RRC messages. The UE may monitor a set of PDCCH candidates according to configuration parameters of a search space set. The UE may monitor a set of PDCCH candidates in one or more CORESETs for detecting one or more DCIs. Monitoring may comprise decoding one or more PDCCH candidates of the set of the PDCCH candidates according to the monitored DCI formats. Monitoring may comprise decoding a DCI content of one or more PDCCH candidates with possible (or configured) PDCCH locations, possible (or configured) PDCCH formats (e.g., number of CCEs, number of PDCCH candidates in common search spaces, and/or number of PDCCH candidates in the UE-specific search spaces) and possible (or configured) DCI formats. The decoding may be referred to as blind decoding. The UE may determine a DCI as valid for the UE, in response to CRC checking (e.g., scrambled bits for CRC parity bits of the DCI matching a RNTI value). The UE may process information contained in the DCI (e.g., a scheduling assignment, an uplink grant, power control, a slot format indication, a downlink preemption, and/or the like).
The UE may transmit uplink control signaling (e.g., uplink control information (UCI)) to a base station. The uplink control signaling may comprise hybrid automatic repeat request (HARQ) acknowledgements for received DL-SCH transport blocks. The UE may transmit the HARQ acknowledgements after receiving a DL-SCH transport block. Uplink control signaling may comprise channel state information (CSI) indicating channel quality of a physical downlink channel. The UE may transmit the CSI to the base station. The base station, based on the received CSI, may determine transmission format parameters (e.g., comprising multi-antenna and beamforming schemes) for a downlink transmission. Uplink control signaling may comprise scheduling requests (SR). The UE may transmit an SR indicating that uplink data is available for transmission to the base station. The UE may transmit a UCI (e.g., HARQ acknowledgements (HARQ-ACK), CSI report, SR, and the like) via a physical uplink control channel (PUCCH) or a physical uplink shared channel (PUSCH). The UE may transmit the uplink control signaling via a PUCCH using one of several PUCCH formats.
There may be five PUCCH formats and the UE may determine a PUCCH format based on a size of the UCI (e.g., a number of uplink symbols of UCI transmission and a number of UCI bits). PUCCH format 0 may have a length of one or two OFDM symbols and may include two or fewer bits. The UE may transmit UCI in a PUCCH resource using PUCCH format 0 if the transmission is over one or two symbols and the number of HARQ-ACK information bits with positive or negative SR (HARQ-ACK/SR bits) is one or two. PUCCH format 1 may occupy a number between four and fourteen OFDM symbols and may include two or fewer bits. The UE may use PUCCH format 1 if the transmission is four or more symbols and the number of HARQ-ACK/SR bits is one or two. PUCCH format 2 may occupy one or two OFDM symbols and may include more than two bits. The UE may use PUCCH format 2 if the transmission is over one or two symbols and the number of UCI bits is two or more. PUCCH format 3 may occupy a number between four and fourteen OFDM symbols and may include more than two bits. The UE may use PUCCH format 3 if the transmission is four or more symbols, the number of UCI bits is two or more and PUCCH resource does not include an orthogonal cover code. PUCCH format 4 may occupy a number between four and fourteen OFDM symbols and may include more than two bits. The UE may use PUCCH format 4 if the transmission is four or more symbols, the number of UCI bits is two or more and the PUCCH resource includes an orthogonal cover code.
The base station may transmit configuration parameters to the UE for a plurality of PUCCH resource sets using, for example, an RRC message. The plurality of PUCCH resource sets (e.g., up to four sets) may be configured on an uplink BWP of a cell. A PUCCH resource set may be configured with a PUCCH resource set index, a plurality of PUCCH resources with a PUCCH resource being identified by a PUCCH resource identifier (e.g., pucch-Resourceid), and/or a number (e.g., a maximum number) of UCI information bits the UE may transmit using one of the plurality of PUCCH resources in the PUCCH resource set. When configured with a plurality of PUCCH resource sets, the UE may select one of the plurality of PUCCH resource sets based on a total bit length of the UCI information bits (e.g., HARQ-ACK, SR, and/or CSI). If the total bit length of UCI information bits is two or fewer, the UE may select a first PUCCH resource set having a PUCCH resource set index equal to “0”. If the total bit length of UCI information bits is greater than two and less than or equal to a first configured value, the UE may select a second PUCCH resource set having a PUCCH resource set index equal to “1”. If the total bit length of UCI information bits is greater than the first configured value and less than or equal to a second configured value, the UE may select a third PUCCH resource set having a PUCCH resource set index equal to “2”. If the total bit length of UCI information bits is greater than the second configured value and less than or equal to a third value (e.g., 1406), the UE may select a fourth PUCCH resource set having a PUCCH resource set index equal to “3”.
After determining a PUCCH resource set from a plurality of PUCCH resource sets, the UE may determine a PUCCH resource from the PUCCH resource set for UCI (HARQ-ACK, CSI, and/or SR) transmission. The UE may determine the PUCCH resource based on a PUCCH resource indicator in a DCI (e.g., with a DCI format 1_0 or DCI for 1_1) received on a PDCCH. A three-bit PUCCH resource indicator in the DCI may indicate one of eight PUCCH resources in the PUCCH resource set. Based on the PUCCH resource indicator, the UE may transmit the UCI (HARQ-ACK, CSI and/or SR) using a PUCCH resource indicated by the PUCCH resource indicator in the DCI.
FIG. 15 illustrates an example of a wireless device 1502 in communication with a base station 1504 in accordance with embodiments of the present disclosure. The wireless device 1502 and base station 1504 may be part of a mobile communication network, such as the mobile communication network 100 illustrated in FIG. 1A, the mobile communication network 150 illustrated in FIG. 1B, or any other communication network. Only one wireless device 1502 and one base station 1504 are illustrated in FIG. 15, but it will be understood that a mobile communication network may include more than one UE and/or more than one base station, with the same or similar configuration as those shown in FIG. 15.
The base station 1504 may connect the wireless device 1502 to a core network (not shown) through radio communications over the air interface (or radio interface) 1506. The communication direction from the base station 1504 to the wireless device 1502 over the air interface 1506 is known as the downlink, and the communication direction from the wireless device 1502 to the base station 1504 over the air interface is known as the uplink. Downlink transmissions may be separated from uplink transmissions using FDD, TDD, and/or some combination of the two duplexing techniques.
In the downlink, data to be sent to the wireless device 1502 from the base station 1504 may be provided to the processing system 1508 of the base station 1504. The data may be provided to the processing system 1508 by, for example, a core network. In the uplink, data to be sent to the base station 1504 from the wireless device 1502 may be provided to the processing system 1518 of the wireless device 1502. The processing system 1508 and the processing system 1518 may implement layer 3 and layer 2 OSI functionality to process the data for transmission. Layer 2 may include an SDAP layer, a PDCP layer, an RLC layer, and a MAC layer, for example, with respect to FIG. 2A, FIG. 2B, FIG. 3, and FIG. 4A. Layer 3 may include an RRC layer as with respect to FIG. 2B.
After being processed by processing system 1508, the data to be sent to the wireless device 1502 may be provided to a transmission processing system 1510 of base station 1504. Similarly, after being processed by the processing system 1518, the data to be sent to base station 1504 may be provided to a transmission processing system 1520 of the wireless device 1502. The transmission processing system 1510 and the transmission processing system 1520 may implement layer 1 OSI functionality. Layer 1 may include a PHY layer with respect to FIG. 2A, FIG. 2B, FIG. 3, and FIG. 4A. For transmit processing, the PHY layer may perform, for example, forward error correction coding of transport channels, interleaving, rate matching, mapping of transport channels to physical channels, modulation of physical channel, multiple-input multiple-output (MIMO) or multi-antenna processing, and/or the like.
At the base station 1504, a reception processing system 1512 may receive the uplink transmission from the wireless device 1502. At the wireless device 1502, a reception processing system 1522 may receive the downlink transmission from base station 1504. The reception processing system 1512 and the reception processing system 1522 may implement layer 1 OSI functionality. Layer 1 may include a PHY layer with respect to FIG. 2A, FIG. 2B, FIG. 3, and FIG. 4A. For receive processing, the PHY layer may perform, for example, error detection, forward error correction decoding, deinterleaving, demapping of transport channels to physical channels, demodulation of physical channels, MIMO or multi-antenna processing, and/or the like.
As shown in FIG. 15, a wireless device 1502 and the base station 1504 may include multiple antennas. The multiple antennas may be used to perform one or more MIMO or multi-antenna techniques, such as spatial multiplexing (e.g., single-user MIMO or multi-user MIMO), transmit/receive diversity, and/or beamforming. In other examples, the wireless device 1502 and/or the base station 1504 may have a single antenna.
The processing system 1508 and the processing system 1518 may be associated with a memory 1514 and a memory 1524, respectively. Memory 1514 and memory 1524 (e.g., one or more non-transitory computer readable mediums) may store computer program instructions or code that may be executed by the processing system 1508 and/or the processing system 1518 to carry out one or more of the functionalities discussed in the present application. Although not shown in FIG. 15, the transmission processing system 1510, the transmission processing system 1520, the reception processing system 1512, and/or the reception processing system 1522 may be coupled to a memory (e.g., one or more non-transitory computer readable mediums) storing computer program instructions or code that may be executed to carry out one or more of their respective functionalities.
The processing system 1508 and/or the processing system 1518 may comprise one or more controllers and/or one or more processors. The one or more controllers and/or one or more processors may comprise, for example, a general-purpose processor, a digital signal processor (DSP), a microcontroller, an application specific integrated circuit (ASIC), a field programmable gate array (FPGA) and/or other programmable logic device, discrete gate and/or transistor logic, discrete hardware components, an on-board unit, or any combination thereof. The processing system 1508 and/or the processing system 1518 may perform at least one of signal coding/processing, data processing, power control, input/output processing, and/or any other functionality that may enable the wireless device 1502 and the base station 1504 to operate in a wireless environment.
The processing system 1508 and/or the processing system 1518 may be connected to one or more peripherals 1516 and one or more peripherals 1526, respectively. The one or more peripherals 1516 and the one or more peripherals 1526 may include software and/or hardware that provide features and/or functionalities, for example, a speaker, a microphone, a keypad, a display, a touchpad, a power source, a satellite transceiver, a universal serial bus (USB) port, a hands-free headset, a frequency modulated (FM) radio unit, a media player, an Internet browser, an electronic control unit (e.g., for a motor vehicle), and/or one or more sensors (e.g., an accelerometer, a gyroscope, a temperature sensor, a radar sensor, a lidar sensor, an ultrasonic sensor, a light sensor, a camera, and/or the like). The processing system 1508 and/or the processing system 1518 may receive user input data from and/or provide user output data to the one or more peripherals 1516 and/or the one or more peripherals 1526. The processing system 1518 in the wireless device 1502 may receive power from a power source and/or may be configured to distribute the power to the other components in the wireless device 1502. The power source may comprise one or more sources of power, for example, a battery, a solar cell, a fuel cell, or any combination thereof. The processing system 1508 and/or the processing system 1518 may be connected to a GPS chipset 1517 and a GPS chipset 1527, respectively. The GPS chipset 1517 and the GPS chipset 1527 may be configured to provide geographic location information of the wireless device 1502 and the base station 1504, respectively.
FIG. 16A illustrates an example structure for uplink transmission. A baseband signal representing a physical uplink shared channel may perform one or more functions. The one or more functions may comprise at least one of: scrambling; modulation of scrambled bits to generate complex-valued symbols; mapping of the complex-valued modulation symbols onto one or several transmission layers; transform precoding to generate complex-valued symbols; precoding of the complex-valued symbols; mapping of precoded complex-valued symbols to resource elements; generation of complex-valued time-domain Single Carrier-Frequency Division Multiple Access (SC-FDMA) or CP-OFDM signal for an antenna port; and/or the like. In an example, when transform precoding is enabled, a SC-FDMA signal for uplink transmission may be generated. In an example, when transform precoding is not enabled, an CP-OFDM signal for uplink transmission may be generated by FIG. 16A. These functions are illustrated as examples and it is anticipated that other mechanisms may be implemented in various embodiments.
FIG. 16B illustrates an example structure for modulation and up-conversion of a baseband signal to a carrier frequency. The baseband signal may be a complex-valued SC-FDMA or CP-OFDM baseband signal for an antenna port and/or a complex-valued Physical Random Access Channel (PRACH) baseband signal. Filtering may be employed prior to transmission.
FIG. 16C illustrates an example structure for downlink transmissions. A baseband signal representing a physical downlink channel may perform one or more functions. The one or more functions may comprise: scrambling of coded bits in a codeword to be transmitted on a physical channel; modulation of scrambled bits to generate complex-valued modulation symbols; mapping of the complex-valued modulation symbols onto one or several transmission layers; precoding of the complex-valued modulation symbols on a layer for transmission on the antenna ports; mapping of complex-valued modulation symbols for an antenna port to resource elements; generation of complex-valued time-domain OFDM signal for an antenna port; and/or the like. These functions are illustrated as examples and it is anticipated that other mechanisms may be implemented in various embodiments.
FIG. 16D illustrates another example structure for modulation and up-conversion of a baseband signal to a carrier frequency. The baseband signal may be a complex-valued OFDM baseband signal for an antenna port. Filtering may be employed prior to transmission.
A wireless device may receive from a base station one or more messages (e.g., RRC messages) comprising configuration parameters of a plurality of cells (e.g., primary cell, secondary cell). The wireless device may communicate with at least one base station (e.g., two or more base stations in dual-connectivity) via the plurality of cells. The one or more messages (e.g., as a part of the configuration parameters) may comprise parameters of physical, MAC, RLC, PCDP, SDAP, RRC layers for configuring the wireless device. For example, the configuration parameters may comprise parameters for configuring physical and MAC layer channels, bearers, etc. For example, the configuration parameters may comprise parameters indicating values of timers for physical, MAC, RLC, PCDP, SDAP, RRC layers, and/or communication channels.
A timer may begin running once it is started and continue running until it is stopped or until it expires. A timer may be started if it is not running or restarted if it is running. A timer may be associated with a value (e.g., the timer may be started or restarted from a value or may be started from zero and expire once it reaches the value). The duration of a timer may not be updated until the timer is stopped or expires (e.g., due to BWP switching). A timer may be used to measure a time period/window for a process. When the specification refers to an implementation and procedure related to one or more timers, it will be understood that there are multiple ways to implement the one or more timers. For example, it will be understood that one or more of the multiple ways to implement a timer may be used to measure a time period/window for the procedure. For example, a random access response window timer may be used for measuring a window of time for receiving a random access response. In an example, instead of starting and expiry of a random access response window timer, the time difference between two time stamps may be used. When a timer is restarted, a process for measurement of time window may be restarted. Other example implementations may be provided to restart a measurement of a time window.
A UE may be either in an RRC connected state or in an RRC inactive state when an RRC connection has been established. When no RRC connection is established, the UE is in an RRC idle state.
When a UE is in an RRC idle state, (an RRC layer of) the UE or a base station may support PLMN selection; broadcast of system information; cell re-selection mobility; paging for mobile terminated data is initiated by 5GC; DRX for core network (CN) paging configured by non-access stratum (NAS). When a UE is in an RRC idle state, a UE specific DRX may be configured by upper layers; and/or UE controlled mobility based on network configuration. When a UE is in an RRC idle state, (an RRC layer of) the UE may: monitor short messages transmitted with P-RNTI over DCI; monitor a paging channel for core network (CN) paging using serving temporary mobile subscriber identity (S-TMSI) (e.g., 5G-S-TMSI); perform neighbouring cell measurements and cell (re-)selection; acquire system information; send SI request; perform logging of available measurements together with location and time for logged measurement configured UEs.
When a UE is in an RRC inactive state, (an RRC layer of) the UE or a base station may support PLMN selection; broadcast of system information; cell re-selection mobility; paging is initiated by NG-RAN (RAN paging); RAN-based notification area (RNA) is managed by NG-RAN; DRX for RAN paging configured by NG-RAN; core network (e.g., 5G core, 5GC)—RAN (e.g., a base station) connection (both control and/or user planes) is established for UE; an UE AS context is stored in RAN and the UE; RAN knows the RNA which the UE belongs to. For example, when (the RRC layer) of a UE is in an RRC inactive state, a UE specific DRX may be configured by upper layers or by RRC layer; the UE may perform/support UE controlled mobility based on network configuration; the UE may store the UE inactive AS context; a RAN-based notification area (RNA) may be configured by the RRC layer. When a UE is in an RRC inactive state, (an RRC layer of) the UE may: monitor short messages transmitted with P-RNTI over DCI; monitor a paging channel for CN paging using S-TMSI and RAN paging using full inactive-RNTI (I-RNTI) (or full resume identity); perform neighbouring cell measurements and cell (re-)selection; perform RAN-based notification area (RNA) updates periodically and when moving outside the configured RAN-based notification area; acquire system information; send SI request; perform logging of available measurements together with location and time for logged measurement configured UEs.
When a UE is in an RRC connected state, (an RRC layer of) the UE or a base station may support that: 5GC-NG-RAN connection (both C/U-planes) is established for UE; an UE AS context is stored in RAN (e.g., a base station) and the UE; RAN knows the cell which the UE belongs to; transfer of unicast data to/from the UE; network controlled mobility including measurements. For example, when a UE is in an RRC connected state, (an RRC layer of) the UE may: store the AS context; transfer/receive unicast data; at lower layers, be configured with a UE specific DRX; for UEs supporting CA, use of one or more SCells, aggregated with the SpCell, for increased bandwidth; for UEs supporting DC, use of one SCG, aggregated with the MCG, for increased bandwidth; perform/support Network controlled mobility within NR and to/from E-UTRA; when a UE is in an RRC connected state, the UE may: monitor short messages transmitted with P-RNTI over DCI; monitor control channels associated with the shared data channel to determine if data is scheduled for it; provide channel quality and feedback information; perform neighbouring cell measurements and measurement reporting; acquire system information; perform immediate minimization of drive tests (MDT) measurement together with available location reporting.
Radio bearers may be categorized into two groups: data radio bearers (DRB) for user plane data and signalling radio bearers (SRB) for control plane data.
Signalling radio bearers” (SRBs) may be defined as radio bearers (RBs) that are used only for a transmission of RRC and NAS messages. Following SRBs may be defined: SRB0 may be for RRC messages using the common control channel (CCCH) logical channel; SRB1 may be for RRC messages (which may include a piggybacked NAS message) as well as for NAS messages prior to an establishment of SRB2, all using dedicated control channel (DCCH) logical channel; SRB2 may be for NAS messages and for RRC messages which may include logged measurement information, all using DCCH logical channel. SRB2 may have a lower priority than SRB1 and may be configured by the network after access stratum (AS) security activation; SRB3 may be for specific RRC messages when UE is in dual connectivity (e.g., (NG)EN-DC or NR-DC), all using DCCH logical channel. In downlink, piggybacking of NAS messages may be used for one dependent (e.g., with joint success/failure) procedure: bearer establishment/modification/release. In uplink piggybacking of NAS message may be used for transferring the initial NAS message during (RRC) connection setup and (RRC) connection resume. NAS messages transferred via SRB2 may be contained in RRC messages, which may not include any RRC protocol control information. Once AS security is activated, all RRC messages on SRB1, SRB2 and SRB3, including those containing NAS messages, may be integrity protected and ciphered by PDCP. NAS independently may apply integrity protection and ciphering to the NAS messages. Split SRB may is supported for dual connectivity (e.g., multi radio (MR)-DC options) in both SRB1 and SRB2. The split SRB may be not supported for SRB0 and SRB3. For operation with shared spectrum channel access, SRB0, SRB1 and SRB3 may be assigned with the highest priority channel access priority class (CAPC), (e.g., CAPC=1) while CAPC for SRB2 is configurable.
A MAC layer of an UE or a base station may offer different kinds of data transfer service. Each logical channel type may be defined by what type of information is transferred. Logical channels may be classified into two groups: control channels and traffic channels. control channels may be used for the transfer of control plane information: broadcast control channel (BCCH) which is a downlink channel for broadcasting system control information; paging control channel (PCCH) which is a downlink channel that carries paging messages; common control channel (CCCH)which is a channel for transmitting control information between UEs and network. This channel is used for UEs having no RRC connection with the network; and dedicated control channel (DCCH) which is a point-to-point bi-directional channel that transmits dedicated control information between a UE and the network. Used by UEs having an RRC connection. Traffic channels may be used for the transfer of user plane information: dedicated traffic channel (DTCH) which is point-to-point channel, dedicated to one UE, for the transfer of user information. A DTCH may exist in both uplink and downlink.
A UE may transition to an RRC connected state when an RRC connection is established or resumed. The UE may transition to an RRC idle state when RRC connection is released or suspended. The UE may transition to an RRC inactive state when RRC connection is suspended. When the UE is in an RRC idle state, the UE may have a suspended RRC connection. Based on the suspended RRC connection in the RRC idle state, the UE is in an RRC idle state with a suspended RRC connection.
An RRC connection establishment may comprise the establishment of SRB1. A base station may complete the RRC connection establishment prior to completing the establishment of a connection (e.g., N2/N3 connection) with a core network, (e.g., prior to receiving the UE context information from core network entity (e.g., AMF)). Access stratum (AS) security may be not activated during the initial phase of the RRC connection. During the initial phase of the RRC connection, the base station may configure the UE to perform measurement reporting. The UE may send the corresponding measurement reports after successful AS security activation. The UE may receive or accept a handover message (e.g., a handover command) when AS security has been activated.
Upon receiving the UE context from the core network (e.g., AMF), an RAN (a base station) may activate AS security (both ciphering and integrity protection) using the initial AS security activation procedure. RRC messages to activate AS security (command and successful response) may be integrity protected while ciphering is started after completion of the procedure. The response to the RRC messages used to activate AS security may be not ciphered, while the subsequent messages (e.g., used to establish SRB2 and DRBs) may be both integrity protected and ciphered. After having initiated the initial AS security activation procedure, the network (e.g., the base station) may initiate the establishment of SRB2 and DRBs, e.g., the network may do this prior to receiving the confirmation of the initial AS security activation from the UE. The network may apply both ciphering and integrity protection for RRC reconfiguration messages used to establish SRB2 and DRBs. The network should release the RRC connection if the initial AS security activation and/or the radio bearer establishment fails. A configuration with SRB2 without DRB or with DRB without SRB2 may be not supported (i.e., SRB2 and at least one DRB must be configured in the same RRC Reconfiguration message, and it may be not allowed to release all the DRBs without releasing the RRC Connection). For integrated access and backhaul mobile termination (IAB-MT), a configuration with SRB2 without DRB may be supported.
The release of the RRC connection may be initiated by the network. The procedure of the release may be used to re-direct the UE to an NR frequency or an E-UTRA carrier frequency.
The suspension of the RRC connection may be initiated by the network. When the RRC connection is suspended, the UE may store the UE Inactive AS context and any configuration received from the network, and transit to RRC inactive state. The RRC message to suspend the RRC connection may be integrity protected and ciphered.
The resumption of a suspended RRC connection may be initiated by upper layers when the UE needs to transit from RRC inactive state to RRC connected state or by RRC layer to perform a RNA update or by RAN paging from RAN (e.g., a base station). When the RRC connection is resumed, network may configure the UE according to the RRC connection resume procedure based on the stored UE Inactive AS context and any RRC configuration received from the network. The RRC connection resume procedure re-activates AS security and re-establishes SRB(s) and DRB(s).
In response to a request to resume the RRC connection, the network may resume the suspended RRC connection and send/transition UE to RRC connected state, or reject the request to resume and send UE to RRC inactive state (with a wait timer), or directly re-suspend the RRC connection and send UE to RRC_INACTIVE, or directly release the RRC connection and send/transition UE to RRC idle state, or instruct the UE to initiate NAS level recovery (in this case the network sends an RRC setup message).For user data (DRBs), ciphering may provide user data confidentiality and integrity protection provides user data integrity. For RRC signalling (SRBs), ciphering may provide signalling data confidentiality and integrity protection signalling data integrity. Ciphering and integrity protections may be optionally configured except for RRC signalling for which integrity protection may be always configured. Ciphering and integrity protection may be configured per DRB.
For key management and data handling, network entities or an UE processing cleartext may be protected from physical attacks and located in a secure environment. Base station (e.g., gNB or eNB) (AS) keys may be cryptographically separated from the (NAS) keys. Separate AS and NAS level security mode command (SMC) procedures may be used. A sequence number (COUNT) may be used as input to the ciphering and integrity protection and a given sequence number may be used once for a given key (except for identical re-transmission) on the same radio bearer in the same direction.
Keys for security may are organized and derived as follows. A key for a core network entity (e.g., AMF or a key for mobility management entity (MME)) may comprise KAMF (or KMME). The key for a core network entity may be a key derived by mobile equipment (ME) of a UE and a security anchor function (SEAF) from a key for the SEAF (KSEAF). Keys for NAS signalling may comprise: KNASint is a key derived by mobile equipment (ME) of a UE and the core network from a key for the core network entity, which may be used for the protection of NAS signalling with a particular integrity algorithm; and KNASenc is a key derived by ME and the core network entity from a key for the core network entity (e.g., KAMF/KMME), which may be used for the protection of NAS signalling with a particular encryption algorithm. A key for a base station (e.g., gNB or eNB) may comprise KgNB (or KeNB) is a key derived by ME and a core network entity (e.g., AMF/MME) from a key for the core network entity (e.g., KAMF/KMME). A key for a base station may be further derived by ME and source base station when performing horizontal or vertical key derivation. Keys for UP traffic may comprise: KUPenc is a key derived by ME and a base station from key for a base station, which may be used for the protection of UP traffic between ME and a base station with a particular encryption algorithm; KUPint may be a key derived by ME and a base station from a key for a base station, which may be used for the protection of UP traffic between ME and a base station with a particular integrity algorithm. Keys for RRC signalling may comprise: KRRCint is a key derived by ME and a base station from a key for a base station, which may be used for the protection of RRC signalling with a particular integrity algorithm; KRRCenc is a key derived by ME and a base station from a key for a base station, which may be used for the protection of RRC signalling with a particular encryption algorithm. Intermediate keys may comprise: next hop parameters (NH) is a key derived by ME and a core network entity (e.g., AMF/MME) to provide forward security; KgNB* (or KeNB*) is a key derived by ME and a base station when performing a horizontal or vertical key derivation.
A primary authentication may enable mutual authentication between the UE and the network and provide an anchor key called KSEAF. From KSEAF, a key for a core network entity (e.g., KAMF/KMME) may be created during e.g., primary authentication or NAS key re-keying and key refresh events. Based on the key for the core network entity, KNASint and KNASenc may be then derived when running a successful NAS SMC procedure.
Whenever an initial AS security context needs to be established between UE and a base station, a core network entity (e.g., AMF/MME) and the UE may derive a key for a base station (e.g., KgNB/KeNB) and a next hop parameter (NH). The key for a base station and the NH may be derived from the key for a core network entity. A next hop chaining counter (NCC) may be associated with each key for a base station and NH parameter. A key for a base station may be associated with the NCC corresponding to the NH value from which it was derived. At initial setup, the key for a base station may be derived directly from a key for a core network entity, and be then considered to be associated with a virtual NH parameter with NCC value equal to zero. At initial setup, the derived NH value may be associated with the NCC value one. On handovers, the basis for the key for a base station that will be used between the UE and the target base station, called KgNB* (or KeNB*), may be derived from either the currently active key for a base station or from the NH parameter. If KgNB* (or KeNB*) may be derived from the currently active key for a base station, this is referred to as a horizontal key derivation and is indicated to UE with an NCC that does not increase. If the KgNB* (or KeNB*) is derived from the NH parameter, the derivation is referred to as a vertical key derivation and is indicated to UE with an NCC increase. KRRCint, KRRCenc, KUPint and KUPenc may be derived based on a key for a base station after a new key for a base station is derived.
Based on key derivation, a base station with knowledge of a key for a base station (e.g., a KgNB/KeNB), shared with a UE, may be unable to compute any previous KgNB that has been used between the same UE and a previous base station, therefore providing backward security. A base station with knowledge of a key for a base station shared with a UE, may be unable to predict any future key for a base station that will be used between the same UE and another base station after n or more handovers (since NH parameters are only computable by the UE and the core network entity (e.g., AMF/MME)).
An AS SMC procedure may be for RRC and UP security algorithms negotiation and RRC security activation. When AS security context is to be established in a base station, the AMF (or MME) may send security capabilities of a UE to the base station. The base station may choose a ciphering algorithm. The chosen ciphering algorithm may have the highest priority from its configured list and be also present in the security capabilities. The base station may choose a integrity algorithm. The chosen integrity algorithm may have the highest priority from its configured list and be also present in the security capabilities. The chosen algorithms may be indicated to the UE in the AS SMC and this message may be integrity protected. RRC downlink ciphering (encryption) at the base station may start after sending the AS SMC message. RRC uplink deciphering (decryption) at the base station may start after receiving and successful verification of the integrity protected AS security mode complete message from the UE. The UE may verify the validity of the AS SMC message from the base station by verifying the integrity of the received message. RRC uplink ciphering (encryption) at the UE may start after sending the AS security mode complete message. RRC downlink deciphering (decryption) at the UE may start after receiving and successful verification of the AS SMC message. The RRC connection reconfiguration procedure used to add DRBs may be performed only after RRC security has been activated as part of the AS SMC procedure.
A UE may support integrity protected DRBs. In case of failed integrity check (e.g., faulty or missing message authentication code for integrity (MAC-I)), the concerned packet data unit (PDU) may be discarded by a receiving PDCP entity. Key refresh may be possible for a key for a base station (KgNB/KeNB), KRRC-enc, KRRC-int, KUP-enc, and KUP-int and may be initiated by the base station when a PDCP COUNTs are about to be re-used with the same Radio Bearer identity and with the same KgNB. Key re-keying may be possible for the key for a base station (KgNB/KeNB), KRRC-enc, KRRC-int, KUP-enc, and KUP-int and may be initiated by a core network entity (e.g., AMF/MME) when a AS security context different from the currently active one may be activated.
When a UE transition from an RRC idle state to an RRC connected state, RRC protection keys and UP protection keys may be generated while keys for NAS protection as well as higher layer keys are assumed to be already available. These higher layer keys may have been established as a result of an authentication and key agreement (AKA) run, or as a result of a transfer from another AMF during handover or idle mode mobility. When a UE transitions from an RRC connected state to an RRC idle state, base station may delete the keys it stores for that UE such that state information for idle mode UEs only has to be maintained in a core network entity (e.g., AMF/MME). A base station may do no longer store state information about the corresponding UE and delete the current keys from its memory (e.g., when transitioning an RRC connected state to an RRC idle state): the base station and UE may delete NH, key for a base station, KgNB, KRRCint, KRRCenc, KUPint and KUPenc and related NCC; the core network entity (e.g., AMF/MME) and UE may keep key for a core network entity (e.g., KAMF/KMME), KNASint and KNASenc stored.
On mobility with vertical key derivation the NH may be further bound to the target physical cell identifier (PCI) and its frequency absolute radio frequency channel number-downlink link (ARFCN-DL) before it is taken into use as the key for a base station in the target base station. On mobility with horizontal key derivation the currently active key for a base station may be further bound to the target PCI (PCI of the target cell) and its frequency ARFCN-DL before it is taken into use as the key for a base station in the target gNB. In both cases, ARFCN-DL may be the absolute frequency of SSB of the target primary cell (PCell). It may be not required to change the AS security algorithms during intra-gNB-central unit (CU) handover. If the UE does not receive an indication of new AS security algorithms during an intra-gNB-CU handover, the UE may continue to use the same algorithms as before the handover.
AS security may comprise of the integrity protection and ciphering of RRC signalling (SRBs) and user data (DRBs). The AS may apply four different security keys: one for the integrity protection of RRC signalling (KRRCint), one for the ciphering of RRC signalling (KRRCenc), one for integrity protection of user data (KUPint) and one for the ciphering of user data (KUPenc). The four AS keys may be derived from a key for a base station (e.g., KgNB/KgNB). The key for a base station may be based on a key for a core network entity (KAMF/KMME), which may be handled by upper layers (e.g., NAS layer). The integrity protection and ciphering algorithms may be changed with reconfiguration with sync (e.g., handover command). The AS keys (KgNB, KRRCint, KRRCenc, KUPint and KUPenc) may change upon reconfiguration with sync and upon connection re-establishment and connection resume. For each radio bearer an independent counter (count) may be maintained for each direction. For each radio bearer, the count may be used as input for ciphering and integrity protection.
Paging may allow a base station to reach UEs in an RRC idle state and in an RRC inactive state through paging messages, and to notify UEs in an RRC idle state, in an RRC inactive state and an RRC connected state of system information change, and earthquake and tsunami warning system (ETVWS) or commercial mobile alert service (CMAS) indications through short messages. Both paging messages and short messages may be addressed with P-RNTI on PDCCH. The paging messages may be sent on PCCH, the short message may be sent over PDCCH directly.
While a UE is in an RRC idle state, the UE may monitor a paging channels for core network (CN)-initiated paging. While a UE is in an RRC inactive state, the UE may monitor paging channels for RAN-initiated paging. A UE may need not monitor paging channels continuously though. Paging DRX is defined where the UE in an RRC idle state or an RRC inactive state may be only required to monitor paging channels during one paging occasion (PO) per DRX cycle. The Paging DRX cycles may be configured by the network (e.g., a base station or a core network entity (e.g., AMF/MME)): for CN-initiated paging, a default cycle may be broadcast in system information; For CN-initiated paging, a UE specific cycle may be configured via an NAS signalling; For RAN-initiated paging, a UE-specific cycle may be configured via an RRC signalling; The UE may use the shortest of the DRX cycles applicable. For example, a UE in an RRC idle state may use the shortest of the first two cycles above. A UE in RRC_INACTIVE may use the shortest of the three cycles above.
The POs of a UE for CN-initiated and RAN-initiated paging may be based on the same UE identity (ID), resulting in overlapping POs for both. The number of different POs in a DRX cycle may be configurable via system information and a network may distribute UEs to those POs based on their IDs.
When in RRC_CONNECTED, the UE may monitor the paging channels in any PO signalled in system information for SI change indication and PWS notification. A UE in RRC connected state only may monitor paging channels on the active BWP with common search space configured. For operation with shared spectrum channel access, a UE may be configured for an additional number of PDCCH monitoring occasions in its PO to monitor for paging. When the UE detects a PDCCH transmission within the UE's PO addressed with P-RNTI, the UE may be not required to monitor the subsequent PDCCH monitoring occasions within this PO.
A network (e.g., a base station) may initiate a paging procedure by transmitting the paging message at the UE's paging occasion. The network may address multiple UEs within a paging message by including one paging record for each UE. The paging message may comprise a paging record list. The paging record list may comprise one or more paging records. Each paging record may comprise at least one of: a UE identity (ID) and access type. The UE identity may comprise S-TMSI or I-RNTI (resume identity). The access type may indicate whether the paging message originated due to a PDU sessions from non-3GPP access.
Cell selection may be required on transition from registration management (RM)-DEREGISTERED to RM-REGISTERED, from CM-IDLE to CM-CONNECTED and from CM-CONNECTED to CM-IDLE. the RM-DEREGISTERED state, the UE may be not registered with the network. The UE context in a core network entity (e.g., AMF/MME) may hold no valid location or routing information for the UE. The UE may be not reachable by the AMF. In the RM-REGISTERED state, the UE is registered with the network. In the RM-REGISTERED state, the UE can receive services that require registration with the network. A UE in CM-IDLE state may have no NAS signalling connection established with the core network entity (e.g., AMF/MME) (e.g., over N1/S1 interface). The UE may perform cell selection/cell reselection and PLMN selection. A UE in CM-CONNECTED state may have a NAS signalling connection with the core network entity (e.g., over N1/S1 interface). A NAS signalling connection may use an RRC connection between the UE and a base station (e.g., RAN) and an next generation application protocol (NGAP)/S1AP UE association between access network (AN) (e.g., AN of the base station) and the core network entity (e.g., AMF/MME).
Cell selection may be based on following principles. The UE NAS layer may identify a selected PLMN and equivalent PLMNs. Cell selection may be based on cell defining SSB (CD-SSBs) located on synchronization raster: A UE may search the frequency (NR) bands and for each carrier frequency may identify the strongest cell as per the CD-SSB. The UE may then read cell system information broadcast to identify its PLMN(s): The UE may search each carrier in turn (“initial cell selection”) or make use of stored information to shorten the search (“stored information cell selection”). The UE may seek to identify a suitable cell; if the UE is not able to identify a suitable cell it seeks to identify an acceptable cell. When a suitable cell is found or if only an acceptable cell is found, the UE may camp on that cell and commence the cell reselection procedure: A suitable cell is one for which the measured cell attributes satisfy the cell selection criteria; the cell PLMN is the selected PLMN, registered or an equivalent PLMN; the cell is not barred or reserved and the cell is not part of a tracking area which is in the list of “forbidden tracking areas for roaming”; An acceptable cell is one for which the measured cell attributes satisfy the cell selection criteria and the cell is not barred.
On transition from an RRC connected state or RRC inactive state to an RRC idle state, a UE may camp on a cell as result of cell selection according to the frequency be assigned by RRC in the state transition message. The UE may attempt to find a suitable cell in the manner described for stored information or initial cell selection above. If no suitable cell is found on any frequency or RAT, the UE may attempt to find an acceptable cell. In multi-beam operations, the cell quality may be derived amongst the beams corresponding to the same cell.
A UE in an RRC idle may perform cell reselection. The principles of the procedure are the following. Cell reselection may be based on CD-SSBs located on the synchronization raster. The UE may make measurements of attributes of the serving and neighbor cells to enable the reselection process: For the search and measurement of inter-frequency neighbouring cells, the carrier frequencies need to be indicated. Cell reselection may identify the cell that the UE should camp on. The cell reselection may be based on cell reselection criteria which involves measurements of the serving and neighbor cells: intra-frequency reselection is based on ranking of cells; inter-frequency reselection is based on absolute priorities where a UE tries to camp on the highest priority frequency available; an neighbor cell list (NCL) may be provided by a serving cell to handle specific cases for intra- and inter-frequency neighbouring cells; Black lists may be provided to prevent the UE from reselecting to specific intra- and inter-frequency neighbouring cells; White lists may be provided to request the UE to reselect to only specific intra- and inter-frequency neighbouring cells; Cell reselection may be speed dependent; Service specific prioritization. In multi-beam operations, the cell quality may be derived amongst the beams corresponding to the same cell.
A UE may perform one of two procedures such as initial cell selection and cell selection by leveraging stored information. The UE may perform the initial cell selection when the UE does not have stored cell information for the selected PLMN. Otherwise, the UE may perform the cell selection by leveraging stored information. For initial cell selection, a UE may scan all RF channels in the (NR) frequency bands according to its capabilities to find a suitable cell. Based on results of the scan, the UE may search for the strongest cell on each frequency. The UE may select a cell which is a suitable cell. For the cell selection by leveraging stored information, the UE may requires stored information of frequencies and optionally also information on cell parameters from previously received measurement control information elements or from previously detected cells. Based on the stored information, the UE may search a suitable cell and select the suitable cell if the UE found the suitable cell. If the UE does not found the suitable cell, the UE may perform the initial cell selection.
A base station may configure cell selection criteria for cell selection. A UE may seek to identify a suitable cell for the cell selection. The suitable cell is one for which satisfies following conditions: (1) the measured cell attributes satisfy the cell selection criteria, (2) the cell PLMN is the selected PLMN, registered or an equivalent PLMN, (3) the cell is not barred or reserved, and (4) the cell is not part of tracking area which is in the list of “forbidden tracking areas for roaming”. An RRC layer in a UE may inform a NAS layer in the UE of cell selection and reselection result based on changes in received system information relevant for NAS. For example, the cell selection and reselection result may be a cell identity, tracking area code and a PLMN identity.
A UE-RRC layer may initiate an RRC connection establishment procedure, an RRC connection resume procedure, or an RRC connection re-establishment procedure. Based on initiating the RRC connection establishment procedure or the RRC connection resume procedure, the UE may perform one or more procedures where the one or more procedures comprise at least one of: performing a unified access control procedure (e.g., access barring check) for access attempt of the RRC establishment/resume procedure on a serving cell; applying default configurations parameters and configurations/parameters provided by SIB1, (e.g., based on the access attempt being allowed, applying default configurations and configurations/parameters provided by SIB1); performing sending a random access preamble to the serving cell, for example, based on the access attempt being allowed; sending an RRC request message to the serving cell (e.g., based on determining a reception of a random access response being successful, sending an RRC request message to the serving cell0; starting a timer based on sending the RRC request message; receiving an RRC response message or an RRC reject message from the serving cell (e.g., in response to the RRC request message); or sending an RRC complete message (e.g., in response to receiving the RRC response message, sending an RRC complete message). For the RRC connection re-establishment procedure, the UE may not perform the unified access procedure (e.g., access barring check) for access attempt of the RRC reestablishment procedure.
A base station (e.g., NG-RAN) may support overload and access control functionality such as RACH back off, RRC Connection Reject, RRC Connection Release and UE based access barring mechanisms. Unified access control framework applies to all UE states (e.g., an RRC idle, inactive and connected state). The base station may broadcast barring control information associated with access categories and access identities (in case of network sharing, the barring control information may be set individually for each PLMN). The UE may determine whether an access attempt is authorized based on the barring information broadcast for the selected PLMN, the selected access category and access identities for the access attempt. For NAS triggered requests, the UE-NAS layer may determine the access category and access identities. For AS triggered requests, the UE-RRC layer determines the access category while NAS determines the access identities. The base station may handle access attempts with establishment causes “emergency”, “mps-priority access” and “mcs priority access” (e.g., emergency calls, MPS, MCS subscribers) with high priority and respond with RRC Reject to these access attempts only in extreme network load conditions that may threaten the base station stability.
Based on initiating the RRC connection establishment procedure or the RRC connection resume procedure, the UE in an RRC inactive or idle state may perform or initiate access barring check (or a unified access control procedure) for access attempt of the RRC connection establishment procedure or the RRC connection resume procedure. Based on the performing or initiating the access barring check, the UE may determine the access category and access identities for access attempt. The UE may determine the access attempt being barred based on at least one of: timer T309 is running for the access category for the access attempt; and timer T302 is running, and the Access Category is neither ‘2’ nor ‘0’. The UE may determine the access attempt being allowed based on at least one of: the access Category is ‘0’; and system information block (system information block type 25) comprising unified access control (UAC) barring parameters is not broadcasted by a serving cell. The UE may determine the access attempt being barred based on at least one of: an establishment cause (e.g., for the access attempt) being other than emergency; access barring per RSRP parameter of the system information block comprising (or being set to) threshold 0 and the wireless device being in enhanced coverage; access barring per RSRP parameter of the system information block comprising (or being set to) threshold 1 and measured RSRP being less than a first entry in RSRP thresholds PRACH info list; the access barring per RSRP parameter of the system information block comprising (or being set to) threshold 2 and measured RSRP being less than a second entry in the RSRP thresholds PRACH info list; and the access barring per RSRP parameter of the system information block comprising (or being set to) threshold 3 and measured RSRP being less than a third entry in the RSRP thresholds PRACH info list.
The UE may determine the access attempt being allowed based on that system information block not comprising the UAC barring parameters for the access attempt. For example, the UE may determine the access attempt being allowed based on that system information block not comprising the UAC barring parameters for PLMN the UE selected and UAC barring parameters for common. The UE may determine the access attempt being allowed based on the UAC barring parameters for common not comprising the access category of the access attempt. The UAC barring parameters may comprise at least one of: UAC barring parameters per PLMN; and UAC barring parameters for common. The UE may perform access barring check for the access category of the access attempt based on the UAC barring parameters in the system information block. The UE may determine the access attempt being allowed based on corresponding bit of at least one of the access identities in the UAC barring parameters being zero. The UE may draw a first random number uniformly distributed in a range where the range is greater than equal to 0 and lower than 1.
The UE may determine the access attempt being allowed based on the first random number being lower than UAC barring factor in the UAC barring parameters. The UE may determine the access attempt being barred based on the first random number being greater than the UAC barring factor in the UAC barring parameters. In response to the determining the access attempt being barred, the UE may draw a second random number uniformly distributed in a range where the range is greater than equal to 0 and lower than 1. The UE may start barring timer T309 for the access category based on the second random number. When the barring timer T309 is running, the access attempt associated to the access category is barred (e.g., not allowed to transmit). Based on the barring timer T309 expiry, the UE may consider barring for the access category being alleviated. Based on the barring for the access category being alleviated, the UE may perform access barring check for the access category if the UE have access attempt for the access category.
Based on initiating the RRC connection reestablishment procedure, the UE may stop one or more barring timer T309 for all access categories if the one or more barring timer T309 is running. Based on stopping the one or more barring timer T309, the UE may determine barring for all access categories being alleviated. The UE may perform the RRC connection reestablishment procedure based on the barring for all access categories being alleviated. For example, the UE may send an RRC establishment request without barring based on the barring for all access categories being alleviated.
For initiating RRC connection establishment/resume/reestablishment procedure, the UE-RRC layer may use parameters in a received SIB1. The UE-RRC layer may use L1 parameter values and a time alignment timer in the SIB1. The UE-RRC layer may use UAC barring information in the SIB1 to perform the unified access control procedure. Based on the unified access control procedure, the UE-RRC layer may determine whether the access attempt of those RRC procedures is barred or allowed. Based on the determining the access attempt is allowed, the UE-RRC layer may determine send an RRC request message to a base station where the RRC request message may be an RRC setup request message, an RRC resume request message, or an RRC re-establishment message. The UE-NAS layer may or may not provide S-TMSI as an UE identity. The UE-RRC layer may set an UE identity in the RRC request message.
For the RRC setup request message, the UE in an RRC idle state may initiate an RRC connection establishment procedure. Based on initiating the RRC connection establishment procedure, the UE-RRC layer in an RRC idle state may set the UE identity to S-TMSI if the UE-NAS layer provides the S-TMSI. Otherwise, the UE-RRC layer in an RRC idle state may draw a 39-bit random value and set the UE identity to the random value. For the RRC resume request message, the UE-RRC layer in an RRC inactive or idle state may set the UE identity to resume identity stored. For the RRC reestablishment request message, the UE-RRC layer in an RRC connected state may set the UE identity to C-RNTI used in the source PCell. The UE-NAS layer may provide an establishment cause (e.g., UE-NAS layer). The UE-RRC layer may set the establishment cause for the RRC request message.
For the RRC resume request message, the UE in an RRC inactive may initiate an RRC connection resume procedure. the UE in an RRC idle state with a suspended RRC connection may initiate the RRC connection resume procedure. The UE may in an RRC inactive state or an RRC idle state may initiate the RRC connection procedure based on at least one of: resuming a (suspend) RRC connection; and performing/initiating UP small data transmission. Based on initiating the RRC connection resume procedure, the UE-RRC layer may restore stored configuration parameters and stored security keys from the stored UE inactive AS context. Based on the security keys, the UE-RRC layer in an RRC inactive or idle state may set a resume MAC-I value to the 16 least significant bits of the MAC-I calculated based on variable resume MAC input, security key of integrity protection for RRC layer in a UE inactive AS context, the previous configured integrity protection algorithm, and other security parameters (e.g., count, bearer, and direction). The variable resume MAC input may comprise at least one of: physical cell identity of a source cell; C-RNTI of the source cell; and cell identity of a target cell (e.g., a selected cell) where the cell identity is a cell identity in system information block (e.g., SIB1) of the target cell (e.g., the selected cell). Based on the security keys and next hop chaining count (NCC) value, the UE-RRC layer in an RRC inactive or idle state derive new security keys for integrity protection and ciphering, and configure lower layers (e.g., UE-PDCP layer) to apply them. The UE may have a stored NCC value and resume identity. The UE may receive an RRC release message with suspend indication (or suspend configuration parameters) where the RRC release message comprises at least one of: the resume identity; and the NCC value. The UE-RRC layer in an RRC inactive or idle state may re-establish PDCP entities for one or more bearers. The UE-RRC layer may resume one or more bearer. For example, based on resuming the RRC connection, the UE-RRC layer may resume SRB1. Based on performing the UP small data transmission, the UE-RRC layer may resume one or more SRB(s) and DRB(s). The UE-RRC layer in the RRC inactive or idle state may send an RRC resume request message to the base station where the RRC resume request message may comprise at least one of: the resume identity; the resume MAC-I; and resume cause.
For the RRC reestablishment request message, the UE in an RRC connected state may initiate an RRC connection reestablishment procedure. Based on initiating the RRC connection reestablishment procedure, the UE-RRC layer in an RRC connected state may contain the physical cell identity of the source PCell and a short MAC-I in the RRC reestablishment message. The UE-RRC layer in an RRC connected state may set the short MAC-I to the 16 east significant bits of the MAC-I calculated based on variable short MAC input, security key of integrity protection for RRC layer and the integrity protection algorithm, which was used in a source PCell or the PCell in which the trigger for the reestablishment occurred, and other security parameters (e.g., count, bearer and direction). The variable short MAC input may comprise at least one of: physical cell identity of the source cell; C-RNTI of a source cell; and cell identity of a target cell (e.g., a selected cell) where the cell identity is a cell identity in system information block (e.g., SIB1) of the target cell (e.g., the selected cell). The UE-RRC layer in an RRC connected state may re-establish PDCP entities and RLC entities for SRB1 and apply default SRB1 configuration parameters for SRB1. The UE-RRC layer in an RRC connected state may configure lower layers (e.g., PDCP layer) to suspend integrity protection and ciphering for SRB1 and resume SRB1.
A UE-RRC layer may send an RRC request message to lower layers (e.g., PDCP layer, RLC layer, MAC layer and/or PHY layer) for transmission where the RRC request message may be an RRC setup request message, an RRC resume request message, or an RRC re-establishment message.
A UE-RRC layer may receive an RRC setup message in response to an RRC resume request message or an RRC reestablishment request message. Based on the RRC setup message, the UE-RRC layer may discard any stored AS context, suspend configuration parameters and current AS security context. The UE-RRC layer may release radio resources for all established RBs except SRB0, including release of the RLC entities, of the associated PDCP entities and of SDAP. The UE-RRC layer may release the RRC configuration except for default L1 parameter values, default MAC cell group configuration and CCCH configuration. The UE-RRC layer may indicate to upper layers (e.g., NAS layer) fallback of the RRC connection. The UE-RRC layer may stop timer T380 if running where the timer T380 is periodic RAN-based Notification Area (RNA) update timer.
A UE-RRC layer may receive an RRC setup message in response to an RRC setup request message, an RRC resume request message or an RRC reestablishment request message. The RRC setup message may comprise a cell group configurations parameters and a radio bearer configuration parameters. The radio bearer configuration parameters may comprise at least one of signaling bearer configuration parameters, data radio bearer configuration parameters and/or security configuration parameters. The security configuration parameters may comprise security algorithm configuration parameters and key to use indication indicating whether the radio bearer configuration parameters are using master key or secondary key. The signaling radio bearer configuration parameters may comprise one or more signaling radio bearer configuration parameters. Each signaling radio configuration parameters may comprise at least one of SRB identity, PDCP configuration parameters, reestablish PDCP indication and/or discard PDCP indication. The data radio bearer configuration parameters may comprise one or more data radio bearer configuration parameters. Each data radio configuration parameters may comprise at least one of DRB identity, PDCP configuration parameters, SDAP configuration parameters, reestablish PDCP indication and/or recover PDCP indication. The radio bearer configuration in the RRC setup message may comprise signaling radio configuration parameters for SIB1. Based on the RRC setup message, the UE-RRC layer may establish SRB1. Based on the RRC setup message, the UE-RRC layer may perform a cell group configuration or radio bearer configuration. The UE-RRC layer may stop a barring timer and wait timer for the cell sending the RRC setup message. Based on receiving the RRC setup message, the UE-RRC layer may perform one or more of the following: transitioning to RRC connected state; stopping a cell re-selection procedure; considering the current cell sending the RRC setup message to be the PCell; or/and sending an RRC setup complete message by setting the content of the RRC setup complete message.
A UE-RRC layer may receive an RRC resume message in response to an RRC resume request message. Based on the RRC resume message, the UE-RRC layer may discard a UE inactive AS context and release a suspend configuration parameters except RNA notification area information. The RRC resume message may comprise at least one of: radio bearer configuration parameters; cell group configuration parameters; measurement configuration parameters; sk counter for AS security; an first indication to request idle/inactive measurement results; an second indication to restore secondary cells (SCells) of master cell group (MCG); a third indication to restore secondary cell group (SCG); and SCG configuration parameters; Based on the RRC resume message, the UE-RRC layer may perform a procedure to configure or restore configuration parameters (e.g., a cell group configuration, a radio bearer configuration and/or SCG configuration); security key update procedure; and/or measurement (configuration) procedure. Based on receiving the RRC resume message, the UE-RRC layer may perform one or more of the following: indicating upper layers (e.g., NAS layer) that the suspended RRC connection has been resumed; resuming SRB2, all DRBs and measurements; entering RRC connected state; stopping a cell re-selection procedure; considering the current cell sending the RRC resume message to be the PCell; or/and sending an RRC resume complete message by setting the content of the RRC resume complete message.
Cell group configuration parameters may be used to configure a master cell group (MCG) or secondary cell group (SCG). If the cell group configuration parameters are used to configure the MCG, the cell group configuration parameters are master cell group configuration parameters. If the cell group configuration parameters are used to configure the SCG, the cell group configuration parameters are secondary cell group configuration parameters. A cell group comprises of one MAC entity, a set of logical channels with associated RLC entities and of a primary cell (SpCell) and one or more secondary cells (SCells). The cell group configuration parameters (e.g., master cell group configuration parameters or secondary cell group configuration parameters) may comprise at least one of RLC bearer configuration parameters for the cell group, MAC cell group configuration parameters for the cell group, physical cell group configuration parameters for the cell group, SpCell configuration parameters for the cell group or SCell configuration parameters for the cell group. The MAC cell group configuration parameters may comprise MAC parameters for a cell group where the MAC parameters may comprise at least DRX parameters. The physical cell group configuration parameters may comprise cell group specific L1 (layer 1) parameters.
The special cell (SpCell) may comprise a primary cell (PCell) of an MCG or a primary SCG cell (PSCell) of a SCG. The SpCell configuration parameters may comprise serving cell specific MAC and PHY parameters for a SpCell. The MR-DC configuration parameters may comprise at least one of SRB3 configuration parameters, measurement configuration parameter for SCG, SCG configuration parameters.
Cell group configuration parameters may comprise at least one of RLC bearer configuration parameters, MAC cell group configuration parameters, physical cell group configuration parameters, SpCell configuration parameters for the first cell group or SCell configuration parameters for other cells of the second base station. The SpCell configuration parameter may comprise at least one of radio link failure timer and constraints, radio link monitoring in sync out of sync threshold, and/or serving cell configuration parameters of the first cell. The serving cell configuration parameters may comprise at least one of: downlink BWP configuration parameters; uplink configuration parameters; uplink configuration parameters for supplement uplink carrier (SUL); PDCCH parameters applicable across for all BWPs of a serving cell; PDSCH parameters applicable across for all BWPs of a serving cell; CSI measurement configuration parameters; SCell deactivation timer; cross carrier scheduling configuration parameters for a serving cell; timing advance group (TAG) identity (ID) of a serving cell; path loss reference linking indicating whether the UE shall apply as pathloss reference either the downlink of SpCell or SCell for this uplink; serving cell measurement configuration parameters; channel access configuration parameters for access procedures of operation with shared spectrum channel access;
The CSI measurement configuration parameters may be to configure CSI-RS (reference signals) belonging to the serving cell, channel state information report to configure CSI-RS (reference signals) belonging to the serving cell and channel state information reports on PUSCH triggered by DCI received on the serving cell.
In an example, the downlink BWP configuration parameters may be used to configure dedicated (UE specific) parameters of one or more downlink BWPs. The one or more downlink BWPs may comprise at least one of an initial downlink BWP, a default downlink BWP and a first active downlink BWP. The downlink BWP configuration parameters may comprise at least one of: configuration parameters for the one or more downlink BWPs; one or more downlink BWP IDs for the one or more downlink BWPs; and BWP inactivity timer. The configuration parameters for a downlink BWP may comprise at least one of: PDCCH configuration parameters for the downlink BWP; PDSCH configuration parameters for the downlink BWP; semi-persistent scheduling (SPS) configuration parameters for the downlink BWP; beam failure recovery SCell configuration parameters of candidate RS; and/or radio link monitoring configuration parameters for detecting cell- and beam radio link failure occasions for the downlink BWP. The one or more downlink BWP IDs may comprise at least one of an initial downlink BWP ID, a default downlink BWP identity (ID) and a first active downlink BWP ID.
In an example, the uplink configuration parameters may be uplink configuration parameters for normal uplink carrier (not supplementary uplink carrier). The uplink configuration parameters (or the uplink configuration parameters for SUL) may be used to configure dedicated (UE specific) parameters of one or more uplink BWPs. The one or more uplink BWPs may comprise at least one of an initial uplink BWP and a first active uplink BWP. The uplink BWP configuration parameters may comprise at least one of: configuration parameters for the one or more uplink BWPs; one or more uplink BWP IDs for the one or more uplink BWPs; PUSCH parameters common across the UE's BWPs of a serving cell; SRS carrier switching information; and power control configuration parameters. The configuration parameters for a uplink BWP may comprise at least one of: one or more PUCCH configuration parameters for the uplink BWP; PUSCH configuration parameters for the uplink BWP; one or more configured uplink grant configuration parameters for the uplink BWP; SRS configuration parameters for the uplink BWP; beam failure recovery configuration parameters for the uplink BWP; and/or cyclic prefix (CP) extension parameters for the uplink BWP.
The one or more uplink BWP IDs may comprise at least one of an initial uplink BWP ID (e.g., the initial uplink BWP ID=0) and/or an first active uplink BWP ID. The SRS carrier switching information may be is used to configure for SRS carrier switching when PUSCH is not configured and independent SRS power control from that of PUSCH. The power control configuration parameters may comprise at least one of power control configuration parameters for PUSCH, power configuration control parameters for PUCCH and power control parameters for S RS.
A UE-RRC layer in an RRC inactive or idle state may receive an RRC reject message in response to an RRC setup request message or an RRC resume request message. The RRC reject message may contain wait timer. Based on the wait timer, the UE-RRC layer may start timer T302, with the timer value set to the wait timer. Based on the RRC reject message, the UE-RRC layer may inform upper layers (e.g., UE-NAS layer) about the failure to setup an RRC connection or resume an RRC connection. The UE-RRC layer may reset MAC and release the default MAC cell group configuration. Based on the RRC Reject received in response to a request from upper layers, the UE-RRC layer may inform the upper layer (e.g., NAS layer) that access barring is applicable for all access categories except categories ‘0’ and ‘2’.
A UE-RRC layer in an RRC inactive or idle state may receive an RRC reject message in response to an RRC resume request message. Based on the RRC reject message, The UE-RRC layer may discard current security keys. The UE-RRC layer may re-suspend the RRC connection. The UE-RRC layer may set pending ma update value to true if resume is triggered due to an RNA update.
A UE-RRC layer in an RRC inactive or idle state may perform a cell (re)selection procedure while performing an RRC procedure to establish an RRC connection. Based on cell selection or cell reselection, the UE-RRC layer may change a cell on the UE camped and stop the RRC procedure. The UE-RRC layer may inform upper layers (e.g., NAS layer) about the failure of the RRC procedure.
A UE in an RRC connected state may detect a failure of a connection with a base station. The UE in the RRC connected state may activate AS security with the base station before the detecting the failure. The failure comprises at least one of: a radio link failure (RLF); a reconfiguration with sync failure; a mobility failure from new radio (NR); an integrity check failure indication from lower layers (e.g., PDCP layer) concerning signaling radio bearer 1 (SRB1) or signaling radio bearer 2 (SRB2); or an RRC connection reconfiguration failure.
The radio link failure may be a radio link failure of a primary cell of the base station. The base station may send a reconfiguration with sync in an RRC message to the UE in RRC connected state. The reconfiguration with sync may comprise a reconfiguration timer (e.g., T304). Based on receiving the reconfiguration sync, the UE may start the reconfiguration timer and perform the reconfiguration with sync (e.g., handover). Based on expiry of the reconfiguration timer, the UE determine the reconfiguration sync failure. A base station may send mobility from NR command message to the UE in RRC connected state. Based on receiving the mobility from NR command message, the UE may perform to handover from NR to a cell using other RAT (e.g., E-UTRA). The UE may determine the mobility failure from NR based on at least one of conditions being met: if the UE does not succeed in establishing the connection to the target radio access technology; or if the UE is unable to comply with any part of the configuration included in the mobility from NR command message; or if there is a protocol error in the inter RAT information included in the mobility from NR message.
Based on detecting the failure, the UE in the RRC connected state may initiate an RRC connection reestablishment procedure. Based on initiating the RRC connection reestablishment procedure, the UE may start a timer T311, suspend all radio bearers except for SRB0, reset MAC (layer). Based on initiating the RRC connection reestablishment procedure, the UE in the RRC connected state may release MCG SCells, release special cell (SpCell) configuration parameters and multi-radio dual connectivity (MR-DC) related configuration parameters. For example, based on initiating the RRC connection reestablishment procedure, the UE may release master cell group configuration parameters.
Based on initiating the RRC connection reestablishment procedure, the UE in the RRC connected state may perform a cell selection procedure. Based on the cell selection procedure, the UE may select a cell based on a signal quality of the cell exceeding a threshold. The UE in the RRC connected state may select a cell based on a signal quality of the cell exceeding a threshold. The UE may determine, based on a cell selection procedure, the selected cell exceeding the threshold. The signal quality comprises at least one of: a reference signal received power; a received signal strength indicator; a reference signal received quality; or a signal to interference plus noise ratio.
Based on selecting a suitable cell, the UE in the RRC connected state may stop the timer 311 and start a timer T301. Based on selecting the suitable cell, the UE in the RRC connected state may stop a barring timer T390 for all access categories. Based on stopping the barring timer T390, the UE in the RRC connected state may consider a barring for all access category to be alleviated for the cell. Based on selecting the cell, the UE in the RRC connected state may apply the default L1 parameter values except for the parameters provided in SIB1, apply the default MAC cell group configuration, apply the CCCH configuration, apply a timer alignment timer in SIB1 and initiate transmission of the RRC reestablishment request message.
The UE in the RRC connected state may stop the timer T301 based on reception of an RRC response message in response of the RRC reestablishment request message. The RRC response message may comprise at least one of RRC reestablishment message or RRC setup message or RRC reestablishment reject message. The UE in the RRC connected state may stop the timer T301 when the selected cell becomes unsuitable.
Based on the cell selection procedure triggered by initiating the RRC connection reestablishment procedure, the UE in the RRC connected state may select an inter-RAT cell. Based on selecting an inter-RAT cell, the UE (UE-AS layer) in the RRC connected state may transition to RRC IDLE state and may provide a release cause ‘RRC connection failure’ to upper layers (UE-NAS layer) of the UE.
Based on initiating the transmission of the RRC reestablishment request message, the UE in the RRC connected state may send the RRC reestablishment request message. The RRC reestablishment request message may comprise at least one of C-RNTI used in the source PCell, a physical cell identity (PCI) of the source PCell, short MAC-I or a reestablishment cause. The reestablishment cause may comprise at least one of reconfiguration failure, handover failure or other failure.
Based on initiating the transmission of the RRC reestablishment request message, the UE (RRC layer) in the RRC connected state may re-establish PDCP for SRB1, re-establish RLC for SRB1, apply default SRB configurations for SRB1, configure lower layers (PDCP layer) to suspend integrity protection and ciphering for SRB1, resume SRB1 and submit the RRC reestablishment request message to lower layers (PDCP layer) for transmission. Based on submitting the RRC reestablishment request message to lower layers, the UE in the RRC connected state may send the RRC reestablishment request message to a target base station via the cell selected based on the cell selection procedure wherein the target base station may or may not be the source base station.
Based on expiry of the timer T311 or T301, the UE (UE-AS layer) may transition to an RRC idle state and may provide a release cause ‘RRC connection failure’ to upper layers (UE-NAS layer) of the UE.
Based on receiving the release cause ‘RRC connection failure’, the UE (UE-NAS layer) in the RRC idle state may perform a NAS signaling connection recovery procedure when the UE does not have signaling pending and user data pending. Based on performing the NAS signaling connection recovery procedure, the UE in the RRC idle state may initiate the registration procedure by sending a registration request message to the AMF.
Based on receiving the release cause ‘RRC connection failure’, the UE (UE-NAS layer) in the RRC idle state may perform a service request procedure by sending a service request message to the AMF when the UE has signaling pending or user data pending.
Based on receiving the RRC reestablishment request message, the target base station may check whether the UE context of the UE is locally available. Based on the UE context being not locally available, the target base station may perform a retrieve UE context procedure by sending a retrieve UE context request message to the source base station (the last serving base station) of the UE.
For RRC connection reestablishment procedure, the retrieve UE context request message may comprise at least one of: a UE context ID; integrity protection parameters; or a new cell identifier. The UE context ID may comprise at least one of: C-RNTI contained the RRC reestablishment request message; and a PCI of the source PCell (the last serving PCell). The integrity protection parameters for the RRC reestablishment procedure may be the short MAC-I. The new cell identifier may be an identifier of the target cell where the target cell is a cell where the RRC connection has been requested to be re-established. The new cell identifier is a cell identity in system information block (e.g., SIB1) of the target cell (e.g., the selected cell).
For the RRC connection reestablishment procedure, based on receiving the retrieve UE context request message, the source base station may check the retrieve UE context request message. If the source base station is able to identify the UE context by means of the UE context ID, and to successfully verify the UE by means of the integrity protection contained in the retrieve UE context request message, and decides to provide the UE context to the target base station, the source base station may respond to the target base station with a retrieve UE context response message. If the source base station is not able to identify the UE context by means of the UE context ID, or if the integrity protection contained in the retrieve UE context request message is not valid, the source base station may respond to the target base station with a retrieve UE context failure message.
For the RRC connection reestablishment procedure, the retrieve UE context response message may comprise at least one of Xn application protocol (XnAP) ID of the target base station, XnAP ID of the source base station, globally unique AMF identifier (GUAMI) or UE context information (e.g., UE context information retrieve UE context response). The UE context information may comprise at least one of a NG-C UE associated signaling reference, UE security capabilities, AS security information, UE aggregate maximum bit rate, PDU session to be setup list, RRC context, mobility restriction list or index to RAT/frequency selection priority. The NG-C UE associated signaling reference may be a NG application protocol ID allocated at the AMF of the UE on the NG-C connection with the source base station. The AS security information may comprise a security key of a base station (KgNB) and next hop chaining count (NCC) value. The PDU session to be setup list may comprise PDU session resource related information used at UE context in the source base station. The PDU session resource related information may comprise a PDU session ID, a PDU session resource aggregate maximum bitrate, a security indication, a PDU session type or QoS flows to be setup list. The security indication may comprise a user plane integrity protection indication and confidentiality protection indication which indicates the requirements on user plane (UP) integrity protection and ciphering for the corresponding PDU session, respectively. The security indication may also comprise at least one of an indication whether UP integrity protection is applied for the PDU session, an indication whether UP ciphering is applied for the PDU session, and the maximum integrity protected data rate values (uplink and downlink) per UE for integrity protected DRBs. The PDU session type may indicate at least one of internet protocol version 4 (IPv4), IPv6, IPv4v6, ethernet or unstructured. The QoS flow to be setup list may comprise at least one of QoS flow identifier, QoS flow level QoS parameters (the QoS Parameters to be applied to a QoS flow) or bearer identity.
For the RRC connection reestablishment procedure, the retrieve UE context failure message may comprise at least XnAP ID of the target base station and a cause value.
For the RRC connection reestablishment procedure, based on receiving the retrieve UE context response message, the target base station may send an RRC reestablishment message to the UE. The RRC reestablishment message may comprise at least a network hop chaining count (NCC) value.
Based on receiving the RRC reestablishment message, the UE may derive a new security key of a base station (KgNB) based on at least one of current KgNB or next hop (NH) parameters associated to the NCC value. Based on the new security key of the base station and a previously configured integrity protection algorithm, the UE may derive a security key for integrity protection of an RRC signaling (KRRCint) and a security key for integrity protection of user plane (UP) data (KUPint). Based on the new security key of the base station and a previously configured ciphering algorithm, the UE may derive a security key for ciphering of an RRC signaling (KRRCenc) and a security key for ciphering of user plane (UP) data (KUPenc). Based on the KRRCint, and the previously configured integrity protection algorithm, the UE may verify the integrity protection of the RRC reestablishment message. Based on the verifying being failed, the UE (UE-AS layer) may go to RRC IDLE state and may provide a release cause ‘RRC connection failure’ to upper layers (UE-NAS layer) of the UE. Based on the verifying being successful, the UE may configure to resume integrity protection for SRB1 based on the previously configured integrity protection algorithm and the KRRCint and configure to resume ciphering for SRB1 based on the previously configured ciphering algorithm and KRRCenc. The UE may send an RRC reestablishment complete message to the target base station.
Based on receiving the retrieve UE context failure message, the target base station may send an RRC release message to the UE. For example, based on the retrieve UE context failure message comprising the RRC release message, the target base station may send the RRC release message to the UE. Based on receiving the retrieve UE context failure message, the target base station may send an RRC setup message or an RRC reject message. Based on receiving the retrieve UE context failure message, the target base station may not send any response message to the UE.
FIG. 17 illustrates an example of an RRC connection reestablishment procedure. The UE in an RRC connected state may send and receive data to/from a first base station (for example, a source base station) via cells where the cells comprise a primary cell (PCell) of the first base station. The UE may detect a failure of a connection with the first base station. Based on the failure, the UE may initiate the RRC reestablishment procedure.
In an example of the FIG. 17, based on initiating the RRC connection reestablishment procedure, the UE may start a timer T311, suspend all radio bearers except for SRB0, and/or reset a MAC (layer). Based on initiating the RRC connection reestablishment procedure, the UE may release MCG SCells, release the special cell (SpCell) configuration parameters and the multi-radio dual connectivity (MR-DC) related configuration parameters. Based on initiating the RRC connection reestablishment procedure, the UE may perform a cell selection procedure. Based on the cell selection procedure, the UE may select a cell 2 of a second base station (for example, a target base station) where the cell 2 is a suitable cell. Based on selecting a suitable cell, the UE may stop the timer T311 and start a timer T301. Based on selecting the suitable cell, the UE may stop one or more barring timer T309(s) for all access categories if the one or more barring timer T309(s) is running. Based on stopping the one or more barring timer T309(s), the UE may consider barring for all access category to be alleviated for the cell. Based on selecting the cell, the UE may apply the default L1 parameter values except for the parameters provided in SIB1, apply the default MAC cell group configuration, apply the CCCH configuration, apply a timer alignment timer in SIB1 and initiate transmission of the RRC reestablishment request message.
In an example of the FIG. 17, the RRC reestablishment message may comprise at least one of C-RNTI used in the source PCell (e.g., the cell 1), a physical cell identity (PCI) of the source PCell, short MAC-I or a reestablishment cause. Based on initiating the transmission of the RRC reestablishment request message, the UE (RRC layer) may re-establish PDCP for SRB1, re-establish RLC for SRB1, apply default SRB configurations for SRB1, configure lower layers (PDCP layer) to suspend integrity protection and ciphering for SRB1, resume SRB1 and submit the RRC reestablishment request message to lower layers (PDCP layer) for transmission. Based on initiating the transmission of the RRC reestablishment request message, the UE may send the RRC reestablishment request message to the second base station via the cell 2.
In an example of the FIG. 17, based on receiving the RRC reestablishment request message, the second base station may check whether the UE context of the UE is locally available. Based on the UE context being not locally available, the second base station may perform the retrieve UE context procedure by sending a retrieve UE context request message to the source base station of the UE. the retrieve UE context request message may comprise at least one of: a UE context ID; integrity protection parameters; or a new cell identifier. The UE context ID may comprise at least one of: C-RNTI contained the RRC reestablishment request message; and a PCI of the source PCell (the last serving PCell). The integrity protection parameters for the RRC reestablishment procedure may be the short MAC-I. The new cell identifier may be an identifier of the target cell where the target cell is a cell where the RRC connection has been requested to be re-established. The new cell identifier is a cell identity in system information block (e.g., SIB1) of the target cell (e.g., the selected cell).
In an example of the FIG. 17, based on receiving the retrieve UE context request message, the source base station may check the retrieve UE context request message. If the source base station successfully identifies the UE context by means of the C-RNTI, and to successfully verify the UE by means of the short MAC-I, and decides to provide the UE context to the second base station, the source base station may respond to the second base station with a retrieve UE context response message. The retrieve UE context response message may comprise at least of GUAMI or the UE context information. Based on receiving the retrieve UE context response message, the second base station may send an RRC reestablishment message to the UE. The RRC reestablishment message may comprise a network hop chaining count (NCC) value.
In an example of the FIG. 17, based on receiving the RRC reestablishment message, the UE may derive a new security key of a base station (KgNB) based on at least one of current KgNB or next hop (NH) parameters associated to the NCC value. Based on the new security key of a base station (KgNB) and the previously configured security algorithms, the UE may derive security keys for integrity protection and ciphering of RRC signaling (e.g., KRRCint and KRRCenc respectively) and user plane (UP) data (e.g., KUPint and KUPenc respectively). Based on the security key for integrity protection of the RRC signaling (KRRCint), the UE may verify the integrity protection of the RRC reestablishment message. Based on the verifying being successful, the UE may configure to resume integrity protection for one or more bearers (e.g., signalling radio bearer or an RRC message) based on the previously configured integrity protection algorithm and the KRRCint and configure to resume ciphering for one or more bearers based on the previously configured ciphering algorithm and the KRRCenc.
In an example of the FIG. 17, the second base station may send a first RRC reconfiguration message. The RRC first reconfiguration message may comprise the SpCell configuration parameters. Based on receiving the SpCell configuration parameters, the UE may initiate transmission and reception of data to/from the second base station. The UE may send an RRC reestablishment complete message to the second base station. The RRC reestablishment complete message may comprise measurement report. Based on receiving the measurement report, the second base station may determine to configure SCells and/or secondary cell groups (e.g., SCG or PSCells). Based on the determining, the second base station may send a second RRC reconfiguration message comprising SCells configuration parameters and/or MR-DC related configuration parameters. Based receiving the second RRC reconfiguration message, the UE may transmit and receive data via the SCells and/or SCGs.
In an example of the FIG. 17, the RRC reconfiguration message may comprise at least one of cell group configuration parameters of MCG and/or SCG, radio bearer configuration parameters or AS security key parameters.
A base station may initiate an RRC connection release procedure to transit an RRC state of a UE from RRC connected state to RRC idle state, from an RRC connected state to RRC inactive state, from RRC inactive state back to RRC inactive state when the UE tries to resume, or from RRC inactive state to RRC idle state when the UE tries to resume. The RRC connection procedure may also be used to release an RRC connection of the UE and redirect a UE to another frequency. The base station may send to a UE the RRC release message comprising suspend configuration parameters. Based on the RRC release message, the UE may suspend an RRC connection. The UE may transition an RRC state of the UE to and RRC inactive state or an RRC idle state. The suspend configuration parameters may comprise at least one of a resume identity, RNA configuration, RAN paging cycle, or network hop chaining count (NCC) value where the RNA configuration may comprise RNA notification area information, or periodic RNA update timer value (e.g., T380 value). The base station may use the resume identity (e.g., inactive-RNTI (I-RNTI)) to identify the UE context when the UE is in RRC inactive state.
If the base station has a fresh and unused pair of {NCC, next hop (NH)}, the base station may include the NCC in the suspend configuration parameters. Otherwise, the base station may include the same NCC associated with the current KgNB in the suspend configuration parameters. The NCC is used for AS security. The base station may delete the current AS keys (e.g., KRRCenc, KUPenc), and KUPint after sending the RRC release message comprising the suspend configuration parameters to the UE but may keep the current AS key KRRCint. If the sent NCC value is fresh and belongs to an unused pair of {NCC, NH}, the base station may save the pair of {NCC, NH} in the current UE AS security context and may delete the current AS key KgNB. If the sent NCC value is equal to the NCC value associated with the current KgNB, the base station may keep the current AS key KgNB and NCC. The base station may store the sent resume identity together with the current UE context including the remainder of the AS security context.
Upon receiving the RRC release message comprising the suspend configuration parameters from the base station, the UE may verify that the integrity of the received RRC release message comprising the suspend configuration parameters is correct by checking PDCP MAC-I. If this verification is successful, then the UE may take the received NCC value and save it as stored NCC with the current UE context. The UE may delete the current AS keys KRRCenc, KUPenc, and KUPint, but keep the current AS key KRRCint key. If the stored NCC value is different from the NCC value associated with the current KgNB, the UE may delete the current AS key KgNB. If the stored NCC is equal to the NCC value associated with the current KgNB, the UE shall keep the current AS key KgNB. The UE may store the received resume identity together with the current UE context including the remainder of the AS security context, for the next state transition.
Based on receiving the RRC release message comprising the suspend configuration parameters, the UE may reset MAC, release the default MAC cell group configuration, re-establish RLC entities for one or more bearers. Based on receiving the RRC release message comprising suspend configuration parameters, the UE may store in the UE inactive AS context current configuration parameters and current security keys. For example, the UE may store some of the current configuration parameters. The stored current configuration parameters may comprise a robust header compression (ROHC) state, quality of service (QoS) flow to DRB mapping rules, the C-RNTI used in the source PCell, the global cell identity and the physical cell identity of the source PCell, and all other parameters configured except for the ones within reconfiguration with sync and serving cell configuration common parameters in SIB. The stored security keys may comprise at least one of KgNB and KRRCint. The serving cell configuration common parameters in SIB may be used to configure cell specific parameters of a UE's serving cell in SIB1. Based on receiving the RRC release message comprising the suspend configuration parameters, the UE may suspend all SRB(s) and DRB(s) except for SRB0. Based on receiving the RRC release message comprising suspend configuration parameters, the UE may start a timer T380, enter RRC inactive state, perform cell selection procedure.
The UE in RRC inactive state may initiate an RRC connection resume procedure. For example, based on having data or signaling to transmit, or receiving RAN paging message, the UE in RRC inactive state may initiate the RRC connection resume procedure. Based on initiating the RRC connection resume procedure, the UE may select access category based on triggering condition of the RRC connection resume procedure and perform unified access control procedure based on the access category. Based on the unified access control procedure, the UE may consider access attempt for the RRC connection resume procedure as allowed. Based on considering the access attempt as allowed, the UE may apply the default L1 parameter values as specified in corresponding physical layer specifications, except for the parameters for which values are provided in SIB1, apply the default SRB1 configuration, apply the CCCH configuration, apply the time alignment timer common included in SIB1, apply the default MAC cell group configuration, start a timer T319 and initiate transmission of an RRC resume request message.
Based on initiating the transmission of the RRC resume request message, the UE may set the contents of the RRC resume request message. The RRC resume request message may comprise at least one of resume identity, resume MAC-I or resume cause. The resume cause may comprise at least one of emergency, high priority access, mt access, mo signalling, mo data, mo voice call, mo sms, ran update, mps priority access, mcs priority access.
Based on initiating the transmission of the RRC resume request message, the UE may restore the stored configuration parameters and the stored security keys from the (stored) UE inactive AS context except for the master cell group configuration parameters, MR-DC related configuration parameters (e.g., secondary cell group configuration parameters) and PDCP configuration parameters. The configuration parameter may comprise at least one of the C-RNTI used in the source PCell, the global cell identity and the physical cell identity of the source PCell, and all other parameters configured except for the ones within reconfiguration with sync and serving cell configuration common parameters in SIB. Based on current (restored) KgNB or next hop (NH) parameters associated to the stored NCC value, the UE may derive a new key of a base station (KgNB). Based on the new key of the base station, the UE may derive security keys for integrity protection and ciphering of RRC signalling (e.g., KRRCenc and KRRCint respectively) and security keys for integrity protection and ciphering of user plane data (e.g., KUPint and the KUPenc respectively). Based on configured algorithm and the KRRCint and KUPint, the UE may configure lower layers (e.g., PDCP layer) to apply integrity protection for all radio bearers except SRB0. Based on configured algorithm and the KRRCenc and the KUPenc, the UE may configure lower layers (e.g., PDCP layer) to apply ciphering for all radio bearers except SRB0.
Based on initiating the transmission of the RRC resume request message, the UE may re-establish PDCP entities for one or more bearers, resume the one or more bearers and submit the RRC resume request message to lower layers where the lower layers may comprise at least one of PDCP layer, RLC layer, MAC layer or physical (PHY) layer.
A target base station may receive the RRC resume request message. Based on receiving the RRC resume request message, the target base station may check whether the UE context of the UE is locally available. Based on the UE context being not locally available, the target base station may perform the retrieve UE context procedure by sending the retrieve UE context request message to the source base station (the last serving base station) of the UE. The retrieve UE context request message may comprise at least one of a UE context ID, integrity protection parameters, a new cell identifier or the resume cause where the resume cause is in the RRC resume request message.
For the RRC connection resume procedure, based on receiving the retrieve UE context request message, the source base station may check the retrieve UE context request message. If the source base station is able to identify the UE context by means of the UE context ID, and to successfully verify the UE by means of the integrity protection contained in the retrieve UE context request message, and decides to provide the UE context to the target base station, the source base station may respond to the target base station with the retrieve UE context response message. If the source base station is not able to identify the UE context by means of the UE context ID, or if the integrity protection contained in the retrieve UE context request message is not valid, or, if the source base station decides not to provide the UE context to the target base station, the source base station may respond to the target base station with a retrieve UE context failure message.
For the RRC connection resume procedure, the retrieve UE context failure message may comprise at least XnAP ID of the target base station, an RRC release message or a cause value.
For the RRC connection resume procedure, based on receiving the retrieve UE context response message, the target base station may send an RRC resume message to the UE. The RRC resume message may comprise at least one of radio bearer configuration parameters, cell group configuration parameters for MCG and/or SCG, measurement configuration parameters or sk counter where the sk counter is used to derive a security key of secondary base station based on KgNB.
Based on receiving the retrieve UE context failure message, the target base station may send an RRC release message to the UE. For example, based on the retrieve UE context failure message comprising the RRC release message, the target base station may send the RRC release message to the UE. Based on receiving the retrieve UE context failure message, the target base station may send an RRC setup message or an RRC reject message. Based on receiving the retrieve UE context failure message, the target base station may not send any response message to the UE.
Based on receiving the RRC resume message, the UE may stop the timer T319 and T380. Based on receiving the RRC resume message, the UE may restore mater cell group configuration parameters, secondary cell group configuration parameters and PDCP configuration parameters in the UE inactive AS context. Based on restoring the master cell group configuration parameter and/or the secondary cell group configuration parameters, the UE may configure SCells of MCG and/or SCG by configuring lower layers to consider the restored MCG and/or SCG SCells to be in deactivated state, discard the UE inactive AS context and release the suspend configuration parameters.
Based on receiving the cell group configuration parameters in the RRC resume message, the UE may perform cell group configuration of MCG and/or SCG. Based on receiving the radio bearer configuration parameters in the RRC resume message, the UE may perform radio bearer configuration. Based on the sk counter in the RRC resume message, the UE may perform to update the security key of secondary base station.
A UE may remain in CM-CONNECTED and move within an area configured by the base station without notifying the base station when the UE is in RRC inactive state where the area is an RNA. In RRC inactive state, a last serving base station may keep the UE context and the UE-associated NG connection with the serving AMF and UPF. Based on received downlink data from the UPF or downlink UE-associated signaling from the AMF while the UE is in RRC inactive state, the last serving base station may page in the cells corresponding to the RNA and may send RAN Paging via an Xn interface to neighbor base station(s) if the RNA includes cells of neighbor base station(s).
An AMF may provide to the base station a core network assistance information to assist the base station's decision whether a UE can be sent to RRC inactive state. The core network assistance information may include the registration area configured for the UE, the periodic registration update timer, a UE identity index value, the UE specific DRX, an indication if the UE is configured with mobile initiated connection only (MICO) mode by the AMF, or the expected UE behavior. The base station may use the UE specific DRX and the UE identity index value to determine a paging occasion for RAN paging. The base station may use periodic registration update timer to configure periodic RNA update timer (e.g., a timer T380). The base station may use an expected UE behavior to assist the UE RRC state transition decision
FIG. 18 illustrates an example of an RRC connection resume procedure. A UE in RRC connected state may transmit and receive data to/from a first base station (a source base station) via a cell 1. The first base station may determine to transit a UE in RRC connected state to RRC inactive state. Based on the determining, the base station may send an RRC release message comprising the suspend configuration parameters.
In an example of the FIG. 18, based on receiving the RRC release message comprising suspend configuration parameters, the UE may store in the UE inactive AS Context the current security keys (e.g., KgNB and KRRCint keys) and current configuration parameters. For example, the UE may store some of the current configuration parameters. The stored (current) configuration parameters may be at least one of: robust header compression (ROHC) state; QoS flow to DRB mapping rules; C-RNTI used in source PCell; global cell identity and physical cell identity of the source PCell; and all other parameters configured except for ones within reconfiguration with sync and serving cell configuration common parameters in SIB. The robust header compression (ROHC) state may comprise ROHC states for all PDCP entity (or all bearers) where each PDCP entity per bearer (or each bearer) may have one ROHC state. The QoS flow to DRB mapping rules may be QoS flow to DRB mapping rules for all data radio bearer (DRB) where each DRB may have one QoS follow to DRB mapping rule.
In an example of the FIG. 18, based on receiving the RRC release message comprising suspend configuration parameters, the UE may suspend all SRB(s) and DRB(s) except for SRB0. Based on receiving the RRC release message comprising suspend configuration parameters, the UE may start a timer T380, enter RRC inactive state, perform cell selection procedure. Based on the cell selection procedure, the UE may select a cell 2 of a second base station (a target base station). The UE in RRC inactive state may initiate an RRC connection resume procedure. The UE may perform the unified access control procedure. Based on the unified access control procedure, the UE may consider access attempt for the RRC connection resume procedure as allowed. The UE may apply the default L1 parameter values as specified in corresponding physical layer specifications, except for the parameters for which values are provided in SIB1, apply the default SRB1 configuration, apply the CCCH configuration, apply the time alignment timer common included in SIB1, apply the default MAC cell group configuration, start a timer T319 and initiate transmission of an RRC resume request message.
In an example of the FIG. 18, based on initiating the transmission of the RRC resume request message, the UE may restore the stored configuration parameters and the stored security keys from the (stored) UE inactive AS context. For example, the UE may restore the stored configuration parameters and the stored security keys (e.g., KgNB and KRRCint) from the stored UE Inactive AS context except for the master cell group configuration parameters, MR-DC related configuration parameters (e.g., secondary cell group configuration parameters) and PDCP configuration parameters. Based on current (restored) KgNB or next hop (NH) parameters associated to the stored NCC value, the UE may derive a new key of a base station (KgNB). Based on the new key of the base station, the UE may derive security keys for integrity protection and ciphering of RRC signalling (e.g., KRRCenc and KRRCint respectively) and security keys for integrity protection and ciphering of user plane data (e.g., KUPint and the KUPenc respectively). Based on configured algorithm and the KRRCint and KUPint, the UE (RRC layer) may configure lower layers (e.g., PDCP layer) to apply integrity protection for all radio bearers except SRB0. Based on configured algorithm and the KRRCenc and the KUPenc, the UE may configure lower layers (e.g., PDCP layer) to apply ciphering for all radio bearers except SRB0. For communication between the UE and the base station, the integrity protection and/or the ciphering may be required. Based on the integrity protection and/or the ciphering, the UE may be able to transmit and receive data to/from the second base station. The UE may use the restored configuration parameters to transmit and receive the data to/from the second base station.
In an example of the FIG. 18, based on initiating the transmission of the RRC resume request message, the UE may re-establish PDCP entities for one or more bearers, resume one or more bearers and submit the RRC resume request message to lower layers. Based on receiving the RRC resume request message, the second base station may check whether the UE context of the UE is locally available. Based on the UE context being not locally available, the second base station may perform the retrieve UE context procedure by sending the retrieve UE context request message to the first base station (the last serving base station) of the UE. The retrieve UE context request message may comprise at least one of: resume identity; resume MAC-I; or the resume cause.
In an example of the FIG. 18, based on receiving the retrieve UE context request message, the first base station may check the retrieve UE context request message. If the first base station is able to identify the UE context by means of the UE context ID, and to successfully verify the UE by means of the resume MAC-I and decides to provide the UE context to the second base station, the first base station may respond to the second base station with the retrieve UE context response message. Based on receiving the retrieve UE context response message, the second base station may send an RRC resume message to the UE. Based on receiving the RRC resume message, the UE may restore mater cell group configuration parameters, secondary cell group configuration parameters and PDCP configuration parameters in the UE inactive AS context. Based on restoring the master cell group configuration parameter and/or the secondary cell group configuration parameters, the UE may configure SCells of MCG and/or SCG by configuring lower layers to consider the restored MCG and/or SCG SCells to be in deactivated state, discard the UE inactive AS context and release the suspend configuration parameters. The UE may transmit and receive data via the SCells and/or SCGs.
A base station may send an RRC release message to a UE to release an RRC connection of the UE. Based on the RRC release message, the UE may release established radio bearers as well as all radio resources.
A base station may send an RRC release message to a UE to suspend the RRC connection. Based on the RRC release message, the UE may suspend all radio bearers except for signaling radio bearer 0 (SRB0). The RRC release message may comprise suspend configuration parameters. The suspend configuration parameters may comprise next hop chaining count (NCC) and resume identity (e.g., ID or identifier).
The base station may send an RRC release message to transit a UE in an RRC connected state to an RRC idle state; or to transit a UE in an RRC connected state to an RRC inactive state; or to transit a UE in an RRC inactive state back to an RRC inactive state when the UE tries to resume; or to transit a UE in an RRC inactive state to an RRC idle state when the UE tries to resume.
The base station may send an RRC release message to redirect a UE to another frequency.
A UE may receive an RRC release message from the base station of serving cell (or PCell). Based on the RRC release message, the UE may performs UE actions for the RRC release message from the base station. The UE may delay the UE actions for the RRC release message a period of time (e.g., 60 ms) from the moment the RRC release message was received or when the receipt of the RRC release message was successfully acknowledged. The UE may send HARQ acknowledgments to the base station for acknowledgments of the RRC release message. Based on a RLC protocol data unit (PDU) comprising the RRC release message and the RLC PDU comprising poll bit, the UE may send a RLC message (e.g., a status report) to the base station for acknowledgments of the RRC release message.
The UE actions for the RRC release message from the base station may comprise at least one of: suspending an RRC connection; releasing an RRC connection; cell (re)selection procedure; and/or idle/inactive measurements.
The RRC release message from the base station may comprise the suspend configuration parameters. Based on the suspend configuration parameters, the UE may perform the suspending an RRC connection. The suspending an RRC connection may comprise at least one of: medium access control (MAC) reset (or resetting MAC); releasing default MAC cell group configuration; re-establishing RLC entities for one or more radio bearers; storing current configuration parameters and current security keys; suspending one or more bearers where the bearers comprises signaling radio bearer and data radio bearer; and/or transitioning an RRC idle state or an RRC inactive state.
For example, the suspend configuration parameters may further comprise RNA configuration parameters. Based on the RNA configuration parameters, the UE may transition to an RRC inactive state. For example, based on the suspend configuration parameters not comprising the RNA configuration parameters, the UE may transition to an RRC idle state. For example, the RRC release message comprising the suspend configuration parameters may comprise a indication transitioning to an RRC inactive state. Based on the indication, the UE may transition to an RRC inactive state. For example, based on the RRC release message not comprising the indication, the UE may transition to an RRC idle state.
Based on the MAC reset, the UE may perform to at least one of: stop all timers running in the UE-MAC layer; consider all time alignment timers as expired; set new data indicators (NDIs) for all uplink HARQ processes to the value 0; stop, ongoing RACH procedure; discard explicitly signaled contention-free Random Access Resources, if any; flush Msg 3 buffer; cancel, triggered scheduling request procedure; cancel, triggered buffer status reporting procedure; cancel, triggered power headroom reporting procedure; flush the soft buffers for all DL HARQ processes; for each DL HARQ process, consider the next received transmission for a TB as the very first transmission; and/or release, temporary C-RNTI.
Based on the considering the time alignment timers as expired, the UE may perform at least one of: flush all HARQ buffers for all serving cells; notify RRC to release PUCCH for all Serving cells, if configured; notify RRC to release SRS for all Serving Cells, if configured; clear any configured downlink assignments and configured uplink grants; clear any PUSCH resource for semi-persistent CSI reporting; and/or consider all running time alignment timers as expired.
The default MAC cell group configuration parameters may comprise buffer status report (BSR) configuration parameters (e.g., BSR timers) for a cell group of the base station and power headroom reporting (PHR) configuration parameters (e.g., PHR timers or PHR transmission power factor change parameter) for the cell group of the base station.
The re-establishing RLC entities may comprise at least one of: discarding all RLC SDUs, RLC SDU segments, and RLC PDUs, if any; stopping and resetting all timers of the RLC entities; and resetting all state variables of the RLC entities to their initial values.
The RRC release message from the base station may not comprise the suspend configuration parameters. Based on the RRC message not comprising the suspend configuration parameters, the UE may perform the releasing an RRC connection. The releasing an RRC connection may comprise at least one of: MAC reset (or resetting MAC); discarding the stored configuration parameters and stored security keys (or discarding the stored UE inactive AS context); releasing the suspend configuration parameters; releasing all radio resources, including release of RLC entity, MAC configuration and associated PDCP entity and SDAP for all established radio bearers; and/or transitioning to an RRC idle state.
The RRC release message may comprises an RRC early data complete message.
FIG. 19A, FIG. 19B, and FIG. 19C illustrate a user plane (UP) protocol stack, a control plane (CP) protocol stack, and services provided between protocol layers of the UP protocol stack.
The layers may be associated with an open system interconnection (OSI) model of computer networking functionality. In the OSI model, layer 1 may correspond to the bottom layer, with higher layers on top of the bottom layer. Layer 1 may correspond to a physical layer, which is concerned with the physical infrastructure used for transfer of signals (for example, cables, fiber optics, and/or radio frequency transceivers). In New Radio (NR), layer 1 may comprise a physical layer (PHY). Layer 2 may correspond to a data link layer. Layer 2 may be concerned with packaging of data (into, e.g., data frames) for transfer, between nodes of the network, using the physical infrastructure of layer 1. In NR, layer 2 may comprise a media access control layer (MAC), a radio link control layer (RLC), a packet data convergence layer (PDCP), and a service data application protocol layer (SDAP).
Layer 3 may correspond to a network layer. Layer 3 may be concerned with routing of the data which has been packaged in layer 2. Layer 3 may handle prioritization of data and traffic avoidance. In NR, layer 3 may comprise a radio resource control layer (RRC) and a non-access stratum layer (NAS). Layers 4 through 7 may correspond to a transport layer, a session layer, a presentation layer, and an application layer. The application layer interacts with an end user to provide data associated with an application. In an example, an end user implementing the application may generate data associated with the application and initiate sending of that information to a targeted data network (e.g., the Internet, an application server, etc.). Starting at the application layer, each layer in the OSI model may manipulate and/or repackage the information and deliver it to a lower layer. At the lowest layer, the manipulated and/or repackaged information may be exchanged via physical infrastructure (for example, electrically, optically, and/or electromagnetically). As it approaches the targeted data network, the information will be unpackaged and provided to higher and higher layers, until it once again reaches the application layer in a form that is usable by the targeted data network (e.g., the same form in which it was provided by the end user). To respond to the end user, the data network may perform this procedure in reverse.
FIG. 19A illustrates a user plane protocol stack. The user plane protocol stack may be a new radio (NR) protocol stack for a Uu interface between a UE 1901 and a gNB 1902. In layer 1 of the UP protocol stack, the UE 1901 may implement PHY 1931 and the gNB 1902 may implement PHY 1932. In layer 2 of the UP protocol stack, the UE 1901 may implement MAC 1941, RLC 1951, PDCP 1961, and SDAP 1971. The gNB 1902 may implement MAC 1942, RLC 1952, PDCP 1962, and SDAP 1972.
FIG. 19B illustrates a control plane protocol stack. The control plane protocol stack may be an NR protocol stack for the Uu interface between the UE 1901 and the gNB 1902 and/or an N1 interface between the UE 1901 and an AMF 1912. In layer 1 of the CP protocol stack, the UE 1901 may implement PHY 1931 and the gNB 1902 may implement PHY 1932. In layer 2 of the CP protocol stack, the UE 1901 may implement MAC 1941, RLC 1951, PDCP 1961, RRC 1981, and NAS 1991. The gNB 1902 may implement MAC 1942, RLC 1952, PDCP 1962, and RRC 1982. The AMF 1912 may implement NAS 1992.
The NAS may be concerned with the non-access stratum, in particular, communication between the UE 1901 and the core network (e.g., the AMF 1912). Lower layers may be concerned with the access stratum, for example, communication between the UE 1901 and the gNB 1902. Messages sent between the UE 1901 and the core network may be referred to as NAS messages. In an example, a NAS message may be relayed by the gNB 1902, but the content of the NAS message (e.g., information elements of the NAS message) may not be visible to the gNB 1902.
FIG. 19C illustrates an example of services provided between protocol layers of the NR user plane protocol stack illustrated in FIG. 19A. The UE 1901 may receive services through a PDU session, which may be a logical connection between the UE 1901 and a data network (DN). The UE 1901 and the DN may exchange data packets associated with the PDU session. The PDU session may comprise one or more quality of service (QoS) flows. SDAP 1971 and SDAP 1972 may perform mapping and/or demapping between the one or more QoS flows of the PDU session and one or more radio bearers (e.g., data radio bearers). The mapping between the QoS flows and the data radio bearers may be determined in the SDAP 1972 by the gNB 1902, and the UE 1901 may be notified of the mapping (e.g., based on control signaling and/or reflective mapping). For reflective mapping, the SDAP 1972 of the gNB 220 may mark downlink packets with a QoS flow indicator (QFI) and deliver the downlink packets to the UE 1901. The UE 1901 may determine the mapping based on the QFI of the downlink packets.
PDCP 1961 and PDCP 1962 may perform header compression and/or decompression. Header compression may reduce the amount of data transmitted over the physical layer. The PDCP 1961 and PDCP 1962 may perform ciphering and/or deciphering. Ciphering may reduce unauthorized decoding of data transmitted over the physical layer (e.g., intercepted on an air interface), and protect data integrity (e.g., to ensure control messages originate from intended sources). The PDCP 1961 and PDCP 1962 may perform retransmissions of undelivered packets, in-sequence delivery and reordering of packets, duplication of packets, and/or identification and removal of duplicate packets. In a dual connectivity scenario, PDCP 1961 and PDCP 1962 may perform mapping between a split radio bearer and RLC channels.
RLC 1951 and RLC 1952 may perform segmentation, retransmission through Automatic Repeat Request (ARQ). The RLC 1951 and RLC 1952 may perform removal of duplicate data units received from MAC 1941 and MAC 1942, respectively. The RLCs 213 and 223 may provide RLC channels as a service to PDCPs 214 and 224, respectively.
MAC 1941 and MAC 1942 may perform multiplexing and/or demultiplexing of logical channels. MAC 1941 and MAC 1942 may map logical channels to transport channels. In an example, UE 1901 may, in MAC 1941, multiplex data units of one or more logical channels into a transport block. The UE 1901 may transmit the transport block to the gNB 1902 using PHY 1931. The gNB 1902 may receive the transport block using PHY 1932 and demultiplex data units of the transport blocks back into logical channels. MAC 1941 and MAC 1942 may perform error correction through Hybrid Automatic Repeat Request (HARQ), logical channel prioritization, and/or padding.
PHY 1931 and PHY 1932 may perform mapping of transport channels to physical channels. PHY 1931 and PHY 1932 may perform digital and analog signal processing functions (e.g., coding/decoding and modulation/demodulation) for sending and receiving information (e.g., transmission via an air interface). PHY 1931 and PHY 1932 may perform multi-antenna mapping.
FIG. 20 illustrates an example of a quality of service (QoS) model for differentiated data exchange. In the QoS model of FIG. 20, there are a UE 2001, a AN 2002, and a UPF 2005. The QoS model facilitates prioritization of certain packet or protocol data units (PDUs), also referred to as packets. For example, higher-priority packets may be exchanged faster and/or more reliably than lower-priority packets. The network may devote more resources to exchange of high-QoS packets.
In the example of FIG. 20, a PDU session 2010 is established between UE 2001 and UPF 2005. The PDU session 2010 may be a logical connection enabling the UE 2001 to exchange data with a particular data network (for example, the Internet). The UE 2001 may request establishment of the PDU session 2010. At the time that the PDU session 2010 is established, the UE 2001 may, for example, identify the targeted data network based on its data network name (DNN). The PDU session 2010 may be managed, for example, by a session management function (SMF, not shown). In order to facilitate exchange of data associated with the PDU session 2010, between the UE 2001 and the data network, the SMF may select the UPF 2005 (and optionally, one or more other UPFs, not shown).
One or more applications associated with UE 2001 may generate uplink packets 2012A-2012E associated with the PDU session 2010. In order to work within the QoS model, UE 2001 may apply QoS rules 2014 to uplink packets 2012A-2012E. The QoS rules 2014 may be associated with PDU session 2010 and may be determined and/or provided to the UE 2001 when PDU session 2010 is established and/or modified. Based on QoS rules 2014, UE 2001 may classify uplink packets 2012A-2012E, map each of the uplink packets 2012A-2012E to a QoS flow, and/or mark uplink packets 2012A-2012E with a QoS flow indicator (QFI). As a packet travels through the network, and potentially mixes with other packets from other UEs having potentially different priorities, the QFI indicates how the packet should be handled in accordance with the QoS model. In the present illustration, uplink packets 2012A, 2012B are mapped to QoS flow 2016A, uplink packet 2012C is mapped to QoS flow 2016B, and the remaining packets are mapped to QoS flow 2016C.
The QoS flows may be the finest granularity of QoS differentiation in a PDU session. In the figure, three QoS flows 2016A-2016C are illustrated. However, it will be understood that there may be any number of QoS flows. Some QoS flows may be associated with a guaranteed bit rate (GBR QoS flows) and others may have bit rates that are not guaranteed (non-GBR QoS flows). QoS flows may also be subject to per-UE and per-session aggregate bit rates. One of the QoS flows may be a default QoS flow. The QoS flows may have different priorities. For example, QoS flow 2016A may have a higher priority than QoS flow 2016B, which may have a higher priority than QoS flow 2016C. Different priorities may be reflected by different QoS flow characteristics. For example, QoS flows may be associated with flow bit rates. A particular QoS flow may be associated with a guaranteed flow bit rate (GFBR) and/or a maximum flow bit rate (MFBR). QoS flows may be associated with specific packet delay budgets (PDBs), packet error rates (PERs), and/or maximum packet loss rates. QoS flows may also be subject to per-UE and per-session aggregate bit rates.
In order to work within the QoS model, UE 2001 may apply resource mapping rules 2018 to the QoS flows 2016A-2016C. The air interface between UE 2001 and AN 2002 may be associated with resources 2020. In the present illustration, QoS flow 2016A is mapped to resource 2020A, whereas QoS flows 2016B, 2016C are mapped to resource 2020B. The resource mapping rules 2018 may be provided by the AN 2002. In order to meet QoS requirements, the resource mapping rules 2018 may designate more resources for relatively high-priority QoS flows. With more resources, a high-priority QoS flow such as QoS flow 2016A may be more likely to obtain the high flow bit rate, low packet delay budget, or other characteristic associated with QoS rules 2014. The resources 2020 may comprise, for example, radio bearers. The radio bearers (e.g., data radio bearers) may be established between the UE 2001 and the AN 2002. The radio bearers in 5G, between the UE 2001 and the AN 2002, may be distinct from bearers in LTE, for example, Evolved Packet System (EPS) bearers between a UE and a packet data network gateway (PGW), S1 bearers between an eNB and a serving gateway (SGW), and/or an S5/S8 bearer between an SGW and a PGW.
Once a packet associated with a particular QoS flow is received at AN 2002 via resource 2020A or resource 2020B, AN 2002 may separate packets into respective QoS flows 2056A-2056C based on QoS profiles 2028. The QoS profiles 2028 may be received from an SMF. Each QoS profile may correspond to a QFI, for example, the QFI marked on the uplink packets 2012A-2012E. Each QoS profile may include QoS parameters such as 5G QoS identifier (5QI) and an allocation and retention priority (ARP). The QoS profile for non-GBR QoS flows may further include additional QoS parameters such as a reflective QoS attribute (RQA).The QoS profile for GBR QoS flows may further include additional QoS parameters such as a guaranteed flow bit rate (GFBR), a maximum flow bit rate (MFBR), and/or a maximum packet loss rate. The 5QI may be a standardized 5QI which have one-to-one mapping to a standardized combination of 5G QoS characteristics per well-known services. The 5QI may be a dynamically assigned 5QI which the standardized 5QI values are not defined. The 5QI may represent 5G QoS characteristics. The 5QI may comprise a resource type, a default priority level, a packet delay budget (PDB), a packet error rate (PER), a maximum data burst volume, and/or an averaging window. The resource type may indicate a non-GBR QoS flow, a GBR QoS flow or a delay-critical GBR QoS flow. The averaging window may represent a duration over which the GFBR and/or MFBR is calculated. ARP may be a priority level comprising pre-emption capability and a pre-emption vulnerability. Based on the ARP, the AN 2002 may apply admission control for the QoS flows in a case of resource limitations.
The AN 2002 may select one or more N3 tunnels 2050 for transmission of the QoS flows 2056A-2056C. After the packets are divided into QoS flows 2056A-2056C, the packet may be sent to UPF 2005 (e.g., towards a DN) via the selected one or more N3 tunnels 2050. The UPF 2005 may verify that the QFIs of the uplink packets 2012A-2012E are aligned with the QoS rules 2014 provided to the UE 2001. The UPF 2005 may measure and/or count packets and/or provide packet metrics to, for example, a PCF.
The figure also illustrates a process for downlink. In particular, one or more applications may generate downlink packets 2052A-2052E. The UPF 2005 may receive downlink packets 2052A-2052E from one or more DNs and/or one or more other UPFs. As per the QoS model, UPF 2005 may apply packet detection rules (PDRs) 2054 to downlink packets 2052A-2052E. Based on PDRs 2054, UPF 2005 may map packets 2052A-2052E into QoS flows. In the present illustration, downlink packets 2052A, 2052B are mapped to QoS flow 2056A, downlink packet 2052C is mapped to QoS flow 2056B, and the remaining packets are mapped to QoS flow 2056C.
The QoS flows 2056A-2056C may be sent to AN 2002. The AN 2002 may apply resource mapping rules to the QoS flows 2056A-2056C. In the present illustration, QoS flow 2056A is mapped to resource 2020A, whereas QoS flows 2056B, 2056C are mapped to resource 2020B. In order to meet QoS requirements, the resource mapping rules may designate more resources to high-priority QoS flows
The Packet Delay Budget (PDB) may be an upper bound for the time that a packet may be delayed between the UE and the N6 termination point at the UPF. The resource type may determine if dedicated network resources related to a QoS Flow-level Guaranteed Flow Bit Rate (GFBR) value are allocated (e.g., by an admission control function in a base station). A GBR QoS Flow may use either the GBR resource type or the delay-critical GBR resource type. The PDB and PER may be different for GBR and Delay-critical GBR resource types. A Non-GBR QoS Flow may be pre-authorized through static policy and charging control. A non-GBR QoS Flow may use only the non-GBR resource type. A priority (level) associated with 5G QoS characteristics may indicate a priority in scheduling resources among QoS Flows.
FIG. 21A-21D illustrate example states and state transitions of a wireless device (e.g., a UE). At any given time, the wireless device may have a radio resource control (RRC) state, a registration management (RM) state, and a connection management (CM) state.
FIG. 21A is an example diagram showing RRC state transitions of a wireless device (e.g., a UE). The UE may be in one of three RRC states: RRC idle 2110, (e.g., RRC_IDLE), RRC inactive 2120 (e.g., RRC_INACTIVE), or RRC connected 2130 (e.g., RRC_CONNECTED). The UE may implement different RAN-related control-plane procedures depending on its RRC state. Other elements of the network, for example, a base station, may track the RRC state of one or more UEs and implement RAN-related control-plane procedures appropriate to the RRC state of each.
In RRC connected 2130, it may be possible for the UE to exchange data with the network (for example, the base station). The parameters necessary for exchange of data may be established and known to both the UE and the network. The parameters may be referred to and/or included in an RRC context of the UE (sometimes referred to as a UE context). These parameters may include, for example: one or more AS contexts; one or more radio link configuration parameters; bearer configuration information (e.g., relating to a data radio bearer, signaling radio bearer, logical channel, QoS flow, and/or PDU session); security information; and/or PHY, MAC, RLC, PDCP, and/or SDAP layer configuration information. The base station with which the UE is connected may store the RRC context of the UE.
While in RRC connected 2130, mobility of the UE may be managed by the access network, whereas the UE itself may manage mobility while in RRC idle 2110 and/or RRC inactive 2120. While in RRC connected 2130, the UE may manage mobility by measuring signal levels (e.g., reference signal levels) from a serving cell and neighboring cells and reporting these measurements to the base station currently serving the UE. The network may initiate handover based on the reported measurements. The RRC state may transition from RRC connected 2130 to RRC idle 2110 through a connection release procedure 2130 or to RRC inactive 2120 through a connection inactivation procedure 2132.
In RRC idle 2110, an RRC context may not be established for the UE. In RRC idle 2110, the UE may not have an RRC connection with a base station. While in RRC idle 2110, the UE may be in a sleep state for a majority of the time (e.g., to conserve battery power). The UE may wake up periodically (e.g., once in every discontinuous reception cycle) to monitor for paging messages from the access network. Mobility of the UE may be managed by the UE through a procedure known as cell reselection. The RRC state may transition from RRC idle 2110 to RRC connected 2130 through a connection establishment procedure 2113, which may involve a random access procedure, as discussed in greater detail below.
In RRC inactive 2120, the RRC context previously established is maintained in the UE and the base station. This may allow for a fast transition to RRC connected 2130 with reduced signaling overhead as compared to the transition from RRC idle 2110 to RRC connected 2130. The RRC state may transition to RRC connected 2130 through a connection resume procedure 2123. The RRC state may transition to RRC idle 2110 though a connection release procedure 2121 that may be the same as or similar to connection release procedure 2131.
An RRC state may be associated with a mobility management mechanism. In RRC idle 2110 and RRC inactive 2120, mobility may be managed by the UE through cell reselection. The purpose of mobility management in RRC idle 2110 and/or RRC inactive 2120 is to allow the network to be able to notify the UE of an event via a paging message without having to broadcast the paging message over the entire mobile communications network. The mobility management mechanism used in RRC idle 2110 and/or RRC inactive 2120 may allow the network to track the UE on a cell-group level so that the paging message may be broadcast over the cells of the cell group that the UE currently resides within instead of the entire communication network. Tracking may be based on different granularities of grouping. For example, there may be three levels of cell-grouping granularity: individual cells; cells within a RAN area identified by a RAN area identifier (RAI); and cells within a group of RAN areas, referred to as a tracking area and identified by a tracking area identifier (TAI).
Tracking areas may be used to track the UE at the CN level. The CN may provide the UE with a list of TAIs associated with a UE registration area. If the UE moves, through cell reselection, to a cell associated with a TAI not included in the list of TAIs associated with the UE registration area, the UE may perform a registration update with the CN to allow the CN to update the UE's location and provide the UE with a new the UE registration area.
RAN areas may be used to track the UE at the RAN level. For a UE in RRC inactive 2120 state, the UE may be assigned a RAN notification area. A RAN notification area may comprise one or more cell identities, a list of RAIs, and/or a list of TAIs. In an example, a base station may belong to one or more RAN notification areas. In an example, a cell may belong to one or more RAN notification areas. If the UE moves, through cell reselection, to a cell not included in the RAN notification area assigned to the UE, the UE may perform a notification area update with the RAN to update the UE's RAN notification area.
A base station storing an RRC context for a UE or a last serving base station of the UE may be referred to as an anchor base station. An anchor base station may maintain an RRC context for the UE at least during a period of time that the UE stays in a RAN notification area of the anchor base station and/or during a period of time that the UE stays in RRC inactive 2120.
FIG. 21B is an example diagram showing registration management (RM) state transitions of a wireless device (e.g., a UE). The states are RM deregistered 2140, (e.g., RM-DEREGISTERED) and RM registered 2150 (e.g., RM-REGISTERED).
In RM deregistered 2140, the UE is not registered with the network, and the UE is not reachable by the network. In order to be reachable by the network, the UE must perform an initial registration. As an example, the UE may register with an AMF of the network. If registration is rejected (registration reject 2144), then the UE remains in RM deregistered 2140. If registration is accepted (registration accept 2145), then the UE transitions to RM registered 2150. While the UE is RM registered 2150, the network may store, keep, and/or maintain a UE context for the UE. The UE context may be referred to as wireless device context. The UE context corresponding to network registration (maintained by the core network) may be different from the RRC context corresponding to RRC state (maintained by an access network, .e.g., a base station). The UE context may comprise a UE identifier and a record of various information relating to the UE, for example, UE capability information, policy information for access and mobility management of the UE, lists of allowed or established slices or PDU sessions, and/or a registration area of the UE (i.e., a list of tracking areas covering the geographical area where the wireless device is likely to be found).
While the UE is RM registered 2150, the network may store the UE context of the UE, and if necessary use the UE context to reach the UE. Moreover, some services may not be provided by the network unless the UE is registered. The UE may update its UE context while remaining in RM registered 2150 (registration update accept 2155). For example, if the UE leaves one tracking area and enters another tracking area, the UE may provide a tracking area identifier to the network. The network may deregister the UE, or the UE may deregister itself (deregistration 2154). For example, the network may automatically deregister the wireless device if the wireless device is inactive for a certain amount of time. Upon deregistration, the UE may transition to RM deregistered 2140.
FIG. 21C is an example diagram showing connection management (CM) state transitions of a wireless device (e.g., a UE), shown from a perspective of the wireless device. The UE may be in CM idle 2160 (e.g., CM-IDLE) or CM connected 2170 (e.g., CM-CONNECTED).
In CM idle 2160, the UE does not have a non-access stratum (NAS) signaling connection with the network. As a result, the UE may not communicate with core network functions. The UE may transition to CM connected 2170 by establishing an AN signaling connection (AN signaling connection establishment 2167). This transition may be initiated by sending an initial NAS message. The initial NAS message may be a registration request (e.g., if the UE is RM deregistered 2140) or a service request (e.g., if the UE is RM registered 2150). If the UE is RM registered 2150, then the UE may initiate the AN signaling connection establishment by sending a service request, or the network may send a page, thereby triggering the UE to send the service request.
In CM connected 2170, the UE can communicate with core network functions using NAS signaling. As an example, the UE may exchange NAS signaling with an AMF for registration management purposes, service request procedures, and/or authentication procedures. As another example, the UE may exchange NAS signaling, with an SMF, to establish and/or modify a PDU session. The network may disconnect the UE, or the UE may disconnect itself (AN signaling connection release 2176). For example, if the UE transitions to RM deregistered 2140, then the UE may also transition to CM idle 2160. When the UE transitions to CM idle 2160, the network may deactivate a user plane connection of a PDU session of the UE.
FIG. 21D is an example diagram showing CM state transitions of the wireless device (e.g., a UE), shown from a network perspective (e.g., an AMF). The CM state of the UE, as tracked by the AMF, may be in CM idle 2180 (e.g., CM-IDLE) or CM connected 2190 (e.g., CM-CONNECTED). When the UE transitions from CM idle 2180 to CM connected 2190, the AMF many establish an N2 context of the UE (N2 context establishment 2189). When the UE transitions from CM connected 2190 to CM idle 2180, the AMF many release the N2 context of the UE (N2 context release 2198).
FIGS. 22-23 illustrate example procedures for registering and service request of a UE.
FIG. 22 illustrates an example of a registration procedure for a wireless device (e.g., a UE). Based on the registration procedure, the UE may transition from, for example, RM deregistered 2040 to RM registered 2050.
Registration may be initiated by a UE for the purposes of obtaining authorization to receive services, enabling mobility tracking, enabling reachability, or other purposes. The UE may perform an initial registration as a first step toward connection to the network (for example, if the UE is powered on, airplane mode is turned off, etc.). Registration may also be performed periodically to keep the network informed of the UE's presence (for example, while in CM-IDLE state), or in response to a change in UE capability or registration area. Deregistration (not shown in FIG. 22) may be performed to stop network access.
At 2210, the UE transmits a registration request to an AN. As an example, the UE may have moved from a coverage area of a previous AMF (illustrated as AMF #1) into a coverage area of a new AMF (illustrated as AMF #2). The registration request may be a NAS message. The registration request may include a UE identifier. The AN may select an AMF for registration of the UE. For example, the AN may select a default AMF. For example, the AN may select an AMF that is already mapped to the UE (e.g., a previous AMF). The NAS registration request may include a network slice identifier and the AN may select an AMF based on the requested slice. After the AMF is selected, the AN may send the registration request to the selected AMF.
At 2220, the AMF that receives the registration request (AMF #2) performs a context transfer. The context may be a UE context, for example, an RRC context for the UE. As an example, AMF #2 may send AMF #1 a message requesting a context of the UE. The message may include the UE identifier. The message may be a Namf_Communication_UEContextTransfer message. AMF #1 may send to AMF #2 a message that includes the requested UE context. This message may be a Namf_Communication_UEContextTransfer message. After the UE context is received, the AMF #2 may coordinate authentication of the UE. After authentication is complete, AMF #2 may send to AMF #1 a message indicating that the UE context transfer is complete. This message may be a Namf_Communication_UEContextTransfer Response message.
Authentication may require participation of the UE, an AUSF, a UDM and/or a UDR (not shown). For example, the AMF may request that the AUSF authenticate the UE. For example, the AUSF may execute authentication of the UE. For example, the AUSF may get authentication data from UDM. For example, the AUSF may send a subscription permanent identifier (SUPI) to the AMF based on the authentication being successful. For example, the AUSF may provide an intermediate key to the AMF. The intermediate key may be used to derive an access-specific security key for the UE, enabling the AMF to perform security context management (SCM). The AUSF may obtain subscription data from the UDM. The subscription data may be based on information obtained from the UDM (and/or the UDR). The subscription data may include subscription identifiers, security credentials, access and mobility related subscription data and/or session related data.
At 2230, the new AMF, AMF #2, registers and/or subscribes with the UDM. AMF #2 may perform registration using a UE context management service of the UDM (Nudm_UECM). AMF #2 may obtain subscription information of the UE using a subscriber data management service of the UDM (Nudm_SDM). AMF #2 may further request that the UDM notify AMF #2 if the subscription information of the UE changes. As the new AMF registers and subscribes, the old AMF, AMF #1, may deregister and unsubscribe. After deregistration, AMF #1 is free of responsibility for mobility management of the UE.
At 2240, AMF #2 retrieves access and mobility (AM) policies from the PCF. As an example, the AMF #2 may provide subscription data of the UE to the PCF. The PCF may determine access and mobility policies for the UE based on the subscription data, network operator data, current network conditions, and/or other suitable information. For example, the owner of a first UE may purchase a higher level of service than the owner of a second UE. The PCF may provide the rules associated with the different levels of service. Based on the subscription data of the respective UEs, the network may apply different policies which facilitate different levels of service.
For example, access and mobility policies may relate to service area restrictions, RAT/frequency selection priority (RFSP, where RAT stands for radio access technology), authorization and prioritization of access type (e.g., LTE versus NR), and/or selection of non-3GPP access (e.g., Access Network Discovery and Selection Policy (ANDSP)). The service area restrictions may comprise a list of tracking areas where the UE is allowed to be served (or forbidden from being served). The access and mobility policies may include a UE route selection policy (URSP)) that influences routing to an established PDU session or a new PDU session. As noted above, different policies may be obtained and/or enforced based on subscription data of the UE, location of the UE (i.e., location of the AN and/or AMF), or other suitable factors.
At 2250, AMF #2 may update a context of a PDU session. For example, if the UE has an existing PDU session, the AMF #2 may coordinate with an SMF to activate a user plane connection associated with the existing PDU session. The SMF may update and/or release a session management context of the PDU session (Nsmf_PDUSession_UpdateSMContext, Nsmf_PDUSession_ReleaseSMContext).
At 2260, AMF #2 sends a registration accept message to the AN, which forwards the registration accept message to the UE. The registration accept message may include a new UE identifier and/or a new configured slice identifier. The UE may transmit a registration complete message to the AN, which forwards the registration complete message to the AMF #2. The registration complete message may acknowledge receipt of the new UE identifier and/or new configured slice identifier.
At 2270, AMF #2 may obtain UE policy control information from the PCF. The PCF may provide an access network discovery and selection policy (ANDSP) to facilitate non-3GPP access. The PCF may provide a UE route selection policy (URSP) to facilitate mapping of particular data traffic to particular PDU session connectivity parameters. As an example, the URSP may indicate that data traffic associated with a particular application should be mapped to a particular SSC mode, network slice, PDU session type, or preferred access type (3GPP or non-3GPP).
FIG. 23 illustrates an example of a service request procedure for a wireless device (e.g., a UE). The service request procedure depicted in FIG. 23 is a network-triggered service request procedure for a UE in a CM-IDLE state. However, other service request procedures (e.g., a UE-triggered service request procedure) may also be understood by reference to FIG. 23, as will be discussed in greater detail below.
At 2310, a UPF receives data. The data may be downlink data for transmission to a UE. The data may be associated with an existing PDU session between the UE and a DN. The data may be received, for example, from a DN and/or another UPF. The UPF may buffer the received data. In response to the receiving of the data, the UPF may notify an SMF of the received data. The identity of the SMF to be notified may be determined based on the received data. The notification may be, for example, an N4 session report. The notification may indicate that the UPF has received data associated with the UE and/or a particular PDU session associated with the UE. In response to receiving the notification, the SMF may send PDU session information to an AMF. The PDU session information may be sent in an N1N2 message transfer for forwarding to an AN. The PDU session information may include, for example, UPF tunnel endpoint information and/or QoS information.
At 2320, the AMF determines that the UE is in a CM-IDLE state. The determining at 2320 may be in response to the receiving of the PDU session information. Based on the determination that the UE is CM-IDLE, the service request procedure may proceed to 2330 and 2340, as depicted in FIG. 23. However, if the UE is not CM-IDLE (e.g., the UE is CM-CONNECTED), then 2330 and 2340 may be skipped, and the service request procedure may proceed directly to 2350.
At 2330, the AMF pages the UE. The paging at 2330 may be performed based on the UE being CM-IDLE. To perform the paging, the AMF may send a page to the AN. The page may be referred to as a paging or a paging message. The page may be an N2 request message. The AN may be one of a plurality of ANs in a RAN notification area of the UE. The AN may send a page to the UE. The UE may be in a coverage area of the AN and may receive the page.
At 2340, the UE may request service. The UE may transmit a service request to the AMF via the AN. As depicted in FIG. 23, the UE may request service at 2340 in response to receiving the paging at 2330. However, as noted above, this is for the specific case of a network-triggered service request procedure. In some scenarios (for example, if uplink data becomes available at the UE), then the UE may commence a UE-triggered service request procedure. The UE-triggered service request procedure may commence starting at 2340.
At 2350, the network may authenticate the UE. Authentication may require participation of the UE, an AUSF, and/or a UDM, for example, similar to authentication described elsewhere in the present disclosure. In some cases (for example, if the UE has recently been authenticated), the authentication at 2350 may be skipped.
At 2360, the AMF and SMF may perform a PDU session update. As part of the PDU session update, the SMF may provide the AMF with one or more UPF tunnel endpoint identifiers. In some cases (not shown in FIG. 23), it may be necessary for the SMF to coordinate with one or more other SMFs and/or one or more other UPFs to set up a user plane.
At 2370, the AMF may send PDU session information to the AN. The PDU session information may be included in an N2 request message. Based on the PDU session information, the AN may configure a user plane resource for the UE. To configure the user plane resource, the AN may, for example, perform an RRC reconfiguration of the UE. The AN may acknowledge to the AMF that the PDU session information has been received. The AN may notify the AMF that the user plane resource has been configured, and/or provide information relating to the user plane resource configuration.
In the case of a UE-triggered service request procedure, the UE may receive, at 2370, a NAS service accept message from the AMF via the AN. After the user plane resource is configured, the UE may transmit uplink data (for example, the uplink data that caused the UE to trigger the service request procedure).
At 2380, the AMF may update a session management (SM) context of the PDU session. For example, the AMF may notify the SMF (and/or one or more other associated SMFs) that the user plane resource has been configured, and/or provide information relating to the user plane resource configuration. The AMF may provide the SMF (and/or one or more other associated SMFs) with one or more AN tunnel endpoint identifiers of the AN. After the SM context update is complete, the SMF may send an update SM context response message to the AMF.
Based on the update of the session management context, the SMF may update a PCF for purposes of policy control. For example, if a location of the UE has changed, the SMF may notify the PCF of the UE's a new location.
Based on the update of the session management context, the SMF and UPF may perform a session modification. The session modification may be performed using N4 session modification messages. After the session modification is complete, the UPF may transmit downlink data (for example, the downlink data that caused the UPF to trigger the network-triggered service request procedure) to the UE. The transmitting of the downlink data may be based on the one or more AN tunnel endpoint identifiers of the AN.
A (3GPP) system may comprises at least one of: 5G system (5GS) and evolved packet system(EPS) (3G/UMTS system). The system may comprise access network (AN), core network and a wireless device. For example, the 5G system may comprise 5G access network (AN), 5G core network and a wireless device. A wireless device in mobility management (MM)-idle mode (e.g., 5GMM-idle mode or EMM-idle mode) means the UE can be either in MM-idle mode over 3GPP access or in MM-IDLE mode over non-3GPP access. The MM-idle mode may be 5GS MM (5GMM-idle mode) or EPS MM (EMM-idle mode). A wireless device in MM-connected mode (e.g., 5GMM-connected mode or EMM-connected mode) means the UE can be either in MM-connected mode over 3GPP access or in MM-connected mode over non-3GPP access. The MM-connected mode may be 5GS MM-connected mode (5GMM-connected mode) or EPS MM connected mode (EMM-connected mode).
For example, a wireless device is in 5GMM-idle mode over 3GPP access when no (N1) NAS signaling connection between the UE and network (e.g., AMF) over 3GPP access exists. The term 5GMM-idle mode over 3GPP access used in the present document corresponds to the term CM-idle state. For example, a wireless device is in 5GMM-connected mode over 3GPP access when an (N1) NAS signaling connection between the UE and network (e.g., AMF) over 3GPP access exists. The term 5GMM connected mode over 3GPP access used in the present document corresponds to the term CM connected state. For example, a wireless device is in 5GMM-idle mode over non-3GPP access when no N1 NAS signaling connection between the UE and network over non-3GPP access exists. The term 5GMM-idle mode over non-3GPP access used in the present document corresponds to the term CM-idle state. For example, a wireless device is in 5GMM-connected mode over non-3GPP access when an N1 NAS signaling connection between the UE and network over non-3GPP access exists. The term 5GMM-connected mode over non-3GPP access used in the present document corresponds to the term CM-connected state.
Depending on operator's policies, deployment scenarios, subscriber profiles, and available services, different criterion, 5G system (e.g., 5G-CN, NG-RAN) may determine which access attempt should be allowed or blocked when congestion occurs. These different criteria for access control are associated with access identities and access categories. The 5G system will provide a single unified access control where operators control accesses based on these two. In the access control (unified access control (UAC)), each access attempt is categorized into one or more of the access identities and one of the access categories. Based on the access control information applicable for the corresponding access identity and access category of the access attempt, a wireless device may perform a test whether the actual access attempt can be made or not.
The unified access control supports extensibility to allow inclusion of additional standardized access identities and access categories and supports flexibility to allow operators to define operator-defined access categories using their own criterion (e.g., network slicing, application, and application server). Based on operator policy, the 5G system shall be able to prevent wireless devices from accessing the network using relevant barring parameters that vary depending on access identity and access category. Access identities are configured at the wireless device. Access Categories are defined by the combination of conditions related to a wireless device and the type of access attempt. One or more access identities and only one access category are selected and tested for an access attempt. The 5G network may be able to broadcast barring control information (e.g., a list of barring parameters associated with an access identity and an access category) in one or more areas of the RAN. The wireless device is able to determine whether or not a particular new access attempt is allowed based on barring parameters that the wireless device receives from the broadcast barring control information and the configuration in the wireless device.
The unified access control framework is applicable to wireless devices in RRC Idle, RRC Inactive, and RRC Connected at the time of initiating a new access attempt (e.g., new session request). The “new session request” may refer to events, e.g., new multimedia telephony service (MMTEL) voice or video session, sending of short message service (SMS) (SMS over IP, or SMS over NAS), sending of IMS registration related signalling, new PDU session establishment, existing PDU session modification, and service request to re-establish the user plane for an existing PDU session.
When a wireless device needs to transmit an initial NAS message, the wireless device requests to establish an RRC Connection first and the NAS of the wireless device provides the RRC establishment related information to the lower layer (e.g., an RRC layer of the wireless device). A base station handles the RRC Connection with priority during and after RRC Connection establishment procedure, when a wireless device indicates priority in establishment related information. Under high network load conditions, the network may protect itself against overload by using the unified access control (UAC) functionality to limit access attempts from wireless devices. Depending on network configuration, the network may determine whether certain access attempt should be allowed or blocked based on categorized criteria. NG-RAN may broadcast barring control information associated with access categories and access identities. The NG-RAN node may initiate such unified access control when: AMFs request to restrict the load for UEs that access the network by sending overload start message containing conditions; or requested by OAM; or -triggered by the NG-RAN itself. If the NG-RAN node takes a decision to initiate UAC because of the reception of the N2 interface overload start messages, the NG-RAN only initiates such procedure if all the AMFs relevant to the request contained in the overload start message and connected to this NG-RAN node request to restrict the load for wireless devices that access the network. Operator may provide one or more PLMN-specific Operator-defined access category definitions to the UE using NAS signalling, and the UE handles the Operator-defined access category definitions stored for the registered PLMN.
A base station may support overload and unified access control functionality such as RACH back off, RRC (connection) reject, RRC (connection) release and UE based access barring mechanisms. One unified access control framework may apply to all UE states (RRC_IDLE, RRC_INACTIVE and RRC_CONNECTED). A base station may broadcast barring control information associated with access categories and access identities. A wireless device may determine whether an access attempt is authorized based on the barring information broadcast for the selected PLMN, and the selected access category and access identity(ies) for the access attempt. For non-access stratum (NAS) triggered requests, a NAS (layer) of a wireless device determines the access category and access identity(ies). For access stratum (AS) triggered requests, an RRC (layer) of a wireless device determines the Access Category while NAS determines the access identity(ies). The base station may handle access attempts with establishment causes “emergency”, “mps-PriorityAccess” and “mcs-PriorityAccess” (e.g., emergency calls, MPS, MCS subscribers) with high priority and responds with RRC Reject to these access attempts only in extreme network load conditions that may threaten the base station stability.
For non-access stratum (NAS) triggered requests, a UE performs access control checks for access attempts defined by the following list of events: a UE is in CM idle or CM idle with suspend indication and an event that requires a transition to CM connected occurs; and a UE is in CM connected over 3GPP access or CM connected with RRC inactive indication and one of the following events occurs: 1) (a NAS layer of) the UE receives an mobile originated (MO)-IP multimedia subsystem (IMS)-registration-related-signalling-started indication, an MO-MMTEL-voice-call-started indication, an MO-MMTEL-video-call-started indication or an MO-SMSoIP-attempt-started indication from upper layers (e.g., IMS layer or application layer); 2) (a NAS layer) of a UE receives a request from upper layers to send a mobile originated SMS over NAS unless the request triggered a service request procedure to transition the UE from CM idle or CM idle with suspend indication to CM connected; 3) (a NAS layer) of a UE receives a request from upper layers to send an UL NAS transport message for the purpose of PDU session establishment unless the request triggered a service request procedure to transition the UE from CM idle or CM idle with suspend indication to CM connected; 4)
-
- (a NAS layer) of a UE receives a request from upper layers to send an UL NAS transport message for the purpose of PDU session modification unless the request triggered a service request procedure to transition the UE from CM idle or CM idle with suspend indication to CM connected; 5) (a NAS layer) of a UE receives a request to re-establish the user-plane resources for an existing PDU session; 6) (a NAS layer) of a UE is notified that an uplink user data packet is to be sent for a PDU session with suspended user-plane resources; 7) (a NAS layer) of a UE receives a request from upper layers to send a mobile originated location request unless the request triggered a service request procedure to transition the UE from CM idle or CM idle with suspend indication to CM connected; and 8) (a NAS layer) of a UE receives a request from upper layers to send a mobile originated signalling transaction towards the PCF by sending an UL NAS transport message including a UE policy container unless the request triggered a service request procedure to transition the UE from CM idle to CM connected.
Mobility management (MM) specific procedures initiated by NAS in CM connected are not subject to access control, e.g., a registration procedure after PS handover will not be prevented by access control. LTE positioning protocol (LPP) messages transported in the UL NAS transport message sent in response to a mobile terminating or network induced location request, and the corresponding access attempts are handled as mobile terminated (MT) access. When the NAS layer detects one of the above events, the NAS needs to perform the mapping of the kind of request to one or more access identities and one access category and lower layers (e.g., an RRC layer) will perform access barring checks for that request based on the determined access identities and access category. The NAS layer is aware of the above events through indications provided by upper layers or through determining the need to start MM procedures through normal NAS behaviour, or both.
To determine the access identities and the access category for a request, the NAS layer checks the reason for access, types of service requested and profile of the UE including UE configurations, against a set of access identities and access categories defined in, namely: a) a set of standardized access identities; b) a set of standardized access categories; and c) a set of operator-defined access categories, if available. The set of the access identities applicable for the request is determined by the UE in the following way: a) for each of the access identities 1, 2, 11, 12, 13, 14 and 15, the UE checks whether the access identity is applicable in the selected PLMN, if a new PLMN is selected, or otherwise if it is applicable in the registered PLMN (RPLMN) or equivalent PLMN; and b) if none of the above access identities is applicable, then access identity 0 is applicable. The NAS layer of a UE determines access identities with followings: an access identity number ‘0’ if the UE is not configured with any parameters from this table; an access identity number ‘1’ if the UE is configured for multimedia priority service (MPS); an access identity number ‘2’ if the UE is configured for mission critical service (MCS); an access identity number ‘11’ if the UE is access class 11 is configured in the UE; an access identity number ‘12’ if the UE is access class 12 is configured in the UE; an access identity number ‘13’ if the UE is access class 13 is configured in the UE; an access identity number ‘14’ if the UE is access class 14 is configured in the UE; and an access identity number ‘15’ if the UE is access class 15 is configured in the UE.
In order to enable access barring checks for access attempts identified by lower layers (e.g., an RRC layer) in CM connected with RRC inactive indication, the NAS layer of the UE provides the applicable access identities to lower layers.
FIG. 24 illustrates a table of access categories and rules for attempting access. In order to determine the access category applicable for the access attempt, the NAS layer of a UE checks the rules, and use the access category for which there is a match for barring check. If the access attempt matches more than one rule, the access category of the lowest rule number may be selected. If the access attempt matches more than one operator-defined access category definition, the UE may select the access category from the operator-defined access category definition with the lowest precedence value. The case when an access attempt matches more than one rule includes the case when multiple events trigger an access attempt at the same time. Rule #4.1, #5, #6 and #7 may comprise further an access attempt for NAS signalling connection recovery during ongoing procedure for the access attempt type as requirements to be met. When a NAS layer of a UE receives an indication of “RRC Connection failure” from the lower layers (e.g., an RRC layer of the UE) and does not have (NAS) signalling pending (e.g., when the lower layer requests NAS signalling connection recovery), the NAS layer may initiate a registration procedure for mobility and periodic registration update for the NAS signalling connection recovery.
For non-access stratum (NAS) triggered requests, a NAS layer of a UE may categorize an access category and provide access identities and the access category to the lower layers (e.g., an RRC layer) for the purpose of access control checking. In this request to the lower layers, the NAS layer can also provide to the lower layer the RRC establishment cause. If the lower layers indicate that the access attempt is allowed, the NAS layer initiates the procedure associated with the access attempt to send the initial NAS message for the access attempt. If the lower layers indicate that the access attempt is barred, the NAS shall not initiate the procedure associated with the access attempt. Additionally, the NAS layer may notify the upper layers that the access attempt is barred. If the NAS layer receives an indication from the lower layers that the barring is alleviated for the access category with which the access attempt was associated, the NAS layer may initiate the procedure. Additionally, the NAS layer may notify the upper layers that the access attempt is alleviated.
For access stratum (AS) triggered requests, an RRC layer of a UE may determine access categories for access attempt. For example, the RRC layer of the UE may determine access category ‘0’ for RAN paging (e.g., when the UE receives RAN paging). The RRC layer of the UE may determine access category ‘8’ for RNA update (e.g., when the UE triggers RNA update).
An RRC layer of a UE may perform access barring check for an access attempt associated with a given access category and one or more access identities upon request from upper layers (e.g., a NAS layer) or the RRC layer. If an access barring timer (T390) is running for the access category, the RRC layer may determine that the access attempt as barred. If a wait timer (T302) is running and the access category is neither ‘2’ nor ‘0’, the RRC layer may determine that the access attempt as barred. Otherwise, the RRC layer performs the access barring check for the access category of the access attempt based on the UAC barring parameters in the system information block. If the RRC layer determine the access attempt as barred, the RRC layer may start an access barring timer (T390) for the access category and inform the upper layer that the access attempt for the access category is barred if the access barring check was requested by the upper layers.
An RRC layer of a UE may receive an RRC reject message from a base station. Based on an RRC reject message, the RRC layer may start a wait timer (T302) and inform upper layers that the access barring is applicable for all access categories except categories ‘0’ and ‘2’. If the wait timer expires or is stopped, for each access category for which T390 is not running, the RRC layer may determine that the barring for this access category to be alleviated. If timer T390 corresponding to an access category other than ‘2’ expires or is stopped, and if timer T302 is not running, the RRC layer may determine that the barring for this access category to be alleviated. If timer T390 corresponding to the access category ‘2’ expires or is stopped, the RRC layer may determine that the barring for this access category to be alleviated. When barring for an access category is considered being alleviated, the RRC layer may inform upper layers about barring alleviation for the access category if the access category was informed to upper layers as barred. When barring for an access category is considered being alleviated, the RRC layer may perform an RRC connection resume procedure for RNA update if barring is alleviated for Access Category ‘8’.
An upper layer of a wireless device may initiate an access attempt. The upper layer may be a non-access stratum (NAS) layer. The upper layer may determine one or more access identities and/or an access category which are associated with the access attempt. The NAS layer may provide the one or more access identities and/or the access category to a lower layer of the wireless device. The lower layer may be an RRC layer. Based on the one or more access identities and/or the access category, the lower layer may perform access barring check for the access attempt based on UAC barring parameters in system information block. Based on the access barring check, the lower layer may determine the access attempt as allowed. Based on the determining, the lower layer informs the upper layer that the access attempt for the access category is allowed. Based on the informing, the upper layer may initiate a procedure associated with (corresponding to) the access attempt. Based on the initiating, the upper layer may submit an NAS message to the lower layer. The lower layer may send the NAS message via an RRC message to a base station. Based on the determining, the lower layer may perform an RRC connection establishment/resume procedure to establish/resume an RRC connection by transmitting an RRC request message to a base station if the RRC connection is not established/resumed. The lower layer may transition to an RRC connection state by receiving an RRC setup/resume message.
Based on one or more access identities and an access category from an upper layer of a wireless device, a lower layer of the wireless device may perform access barring check for the access attempt. Based on the access barring check, the lower layer may determine the access attempt as barred. Based on the determining, the lower layer may start an access barring timer (T390) for the access category. Based on the determining, the lower layer may inform the upper layer that the access attempt for the access category is barred. Based on the informing, the upper layer may not initiate a procedure associated with (corresponding to) the access attempt. The lower layer may perform an RRC connection establishment/resume procedure to establish/resume an RRC connection (e.g., based on another access attempts or events not associated with access attempts). Based on the performing, the lower layer may receive an RRC setup/resume message from the base station. Based on the RRC setup/resume message (or transitioning to an RRC connected state), the lower layer may stop the access barring timer for the access category and determine that barring for one or more access categories comprising the access category is alleviated. Based on the determining, the lower layer may inform the upper layer about barring alleviation for the one or more access categories including the access category. Based on the informing, the upper layer initiates a procedure associated with (corresponding to) the access attempt (or the access category). The lower layer may transmit, via an RRC message, an NAS message of the procedure to the base station.
FIG. 25 illustrates an example of a multi-USIM device. A wireless device may comprise/support/be capable of multiple universal subscriber identity modules (USIMs). The wireless device comprising/supporting/capable of multiple USIMs may be referred to as a multi-USIM device/UE or a multi-SIM device/UE. For example, a wireless device may be the multi-USIM device/UE based on the wireless device activates multiple USIMs or multiple-USIMs are inserted in the wireless device. A wireless device may not be the multi-USIM device/UE (or may be single USIM device) when the wireless device activates single USIM or single USIM is inserted in the wireless device.
The multi-USIM may be referred to as and/or interchangeable with musim, MUSIM and/or the like.
In example of FIG. 25, a first USIM of the wireless device may be associated with a first network. A second USIM of the wireless device may be associated with a second network. An operator of the first network may or may not be an operator of the second network. For example, the first network is associated with a first public land mobile network (PLMN). The second network is associated with a second PLMN.
The multi-USIM device may maintain a separate registration state or an separate connection management(CM)/mobility management (MM) mode/state or an separate RRC state or a separate protocol stack with a PLMN for each USIM at least over 3GPP Access and supporting one or more of the enhancements.
The multi-USIM device may comprise multiple-protocol stacks. Each USIM of the multi-USIM may comprise/maintain a separate protocol stack as shown in FIG. 19A or FIG. 19B or FIG. 19C.
A network and a wireless device may support one or more of the following enhancements for multi-USIM device operation: connection release; paging cause indication for voice service; reject paging request; paging restriction. In the registration procedure, when a multi-USIM device has more than one USIM active (or inserted), supports and intends to use one or more multi-USIM specific features, it may indicate to an access and mobility management function (AMF) corresponding multi-USIM feature(s) are supported. Based on the received indication of supported multi-USIM features from the wireless device, the AMF may indicate to the wireless device the support of the multi-USIM features based on the multi-USIM features supported by network and any preference policy by the network, if available. When a UE turns to have only one USIM active from a multi-USIM device that previously indicated to the network for the USIM with supported multi-USIM feature(s), the UE may indicate all the multi-USIM features are not supported to the network for the USIM. The AMF may indicate the support of paging restriction feature together with the support of either connection release feature or reject paging feature. The multi-USIM UE may include the support of individual features for connection release, paging cause indication for voice service, reject paging request and paging restriction. A multi-USIM device may use a separate permanent equipment identifier (PEI) for each USIM when it registers to the network.
A multi-USIM device may request the network to release the wireless device (the multi-USIM device) from an RRC connected state for a USIM due to activity on another USIM, if both wireless device and network indicate this feature is supported to each other.
The wireless device may indicate that it requests to be released from an RRC connected state, by initiating either a service request procedure or a registration procedure (e.g., in case the wireless device needs to perform registration update at the same time with this network), including a release indication. If supported by the wireless device, the wireless device may also provide, only together with the release indication, a paging restriction information, which requests the network to restrict paging. The paging restriction information from the wireless device may be stored in the UE context (contexts of the wireless device) in the AMF. If no paging restriction information is provided in the service request or the registration request, any stored paging restriction information in the UE context may be removed.
When the wireless device initiates a service request procedure or registration procedure without providing a release indication, the network may remove stored paging restriction information.
A wireless device and a network may support paging cause indication for voice service feature. The network that supports paging cause indication for voice service feature may provide a voice service indication for IP multimedia subsystem (IMS) voice service in the paging message (e.g., if the UE indicates the paging cause indication for voice service feature is supported to the network). The network may determine the IMS voice service based on the paging policy indicator. Upon reception of the voice service indication in (NGAP) paging message from AMF, the base station (e.g., NG-RAN) supporting paging cause indication for voice service may include the voice service indication in the (Uu) paging message to the wireless device. The NGAP paging message is a paging message sent via NAGP interface wherein the NGAP interface is between AMF and a base station. The Uu paging message is a paging message sent via Uu interface where the Uu interface is between a wireless device and a base station.
When the UE context indicates paging cause indication for voice service feature is supported, in order to require a base station (e.g., NG RAN) to deliver the voice service indication in RAN paging for UE in an RRC inactive state, the AMF may provide an indication indicating the paging cause indication for voice service feature is supported to the base station. Upon reception the indication, the base station supporting the paging cause indication for voice service indication feature may store it into the UE context. For a UE in an RRC inactive state, the base station may provide the voice service indication in the RAN paging message (e.g., when there is paging cause indication for voice service indication in the UE context and detects the downlink data which triggers the RAN paging message is related to voice service based on the paging policy indicator, in the header of the received downlink data).
A wireless device that supports the paging cause indication for voice service feature may be capable of differentiation between paging from a network that does not support the paging cause indication for voice service feature and paging without the voice service indication.
A wireless device (multi-USIM device) may setup connection to respond to a page with a reject paging indication to the network indicating that the UE does not accept the paging and requests to return to CM-idle state after sending this response, (e.g., if both wireless device and network indicate this feature is supported to each other).
Upon being paged by the network, the wireless device in CM-idle state may attempt to send a service request message to this network including the reject paging indication, unless it is unable to do so, e.g., due to UE implementation constraints. In addition to the reject paging indication, the wireless device may include paging restriction information in the service request message, if supported by wireless device.
A wireless device and a network may support paging restriction. The wireless device, if the AMF indicates that the network supports paging restriction feature, may indicate paging restriction information in the service request or registration request message as specified in clauses 5.38.2 and 5.38.4. The paging restriction information may indicate the following: a) all paging is restricted; or b) all paging is restricted, except paging for voice service (IMS voice); or c)
-
- all paging is restricted, except for certain PDU Session(s); or d) all paging is restricted, except paging for voice service (IMS voice) and certain PDU session(s). The wireless device may expect not to be paged for any purpose in case a). The wireless device may expect to be paged only for voice service in case b). The wireless device may expect to be paged only for certain PDU Session(s) in case c). The UE may expect to be paged for voice service and certain PDU session(s) in case d). In the case of roaming, the paging restrictions for voice service implied by bullet b) and d) may depend on the existence of an agreement with the HPLMN to support voice service via IMS. Hence the support of paging restrictions in bullets b) and d) may take the IMS voice service agreement into consideration.
A wireless device that support or is capable MUSIM (multi-USIM) (e.g., multi-USIM device) and in 5GMM-idle mode requests the network to remove the paging restriction. The wireless may request the release of the NAS signaling connection or rejects the paging request from the network.
A wireless device may invoke/initiate the service request procedure when the wireless device, in 5GMM-IDLE mode over 3GPP access, receives a paging request from the network
A wireless device may invoke/initiate the service request procedure when the wireless device, in 5GMM-connected mode over 3GPP access, receives a notification from the network with access type indicating non-3GPP access;
A wireless device may invoke/initiate the service request procedure when the wireless device, in 5GMM-idle mode over 3GPP access, has uplink signaling pending;
A wireless device may invoke/initiate the service request procedure when the wireless device, in 5GMM-idle mode over 3GPP access, has uplink user data pending (except in case j);
A wireless device may invoke/initiate the service request procedure when the wireless device that is MUSIM capable (multi-USIM device) and in 5GMM-idle mode is requesting the network to remove the paging restriction.
A wireless device may invoke/initiate the service request procedure when the wireless device (multi-USIM device), is in 5GMM-CONNECTED mode or is in 5GMM-CONNECTED mode with RRC inactive indication, rejects the RAN paging; and requests the network to release the NAS signaling connection and optionally includes paging restrictions.
A wireless device may invoke/initiate the service request procedure when the wireless device (multi-USIM device), in 5GMM-IDLE mode when responding to paging rejects the paging request from the network, requests the network to release the NAS signaling connection and optionally includes paging restrictions.
A base station (e.g., NG-RAN) may support one or more of the following enhancements for multi-USIM device operation: paging collision avoidance; UE notification on network switching; busy indication.
The purpose of paging collision avoidance is to address the overlap of paging occasions on both USIMs when a multi-USIM device (e.g., dual USIM device) is in an RRC idle state or an RRC inactive state in both the networks (e.g., network Ala first network and network B/a second network) associated with respective SIMs. Both networks may be NR network or E-UTRA network to address the scenario where network A is NR and network B is E-UTRA or NR.
A multi-SIM device may determine potential paging collision on two networks and may trigger actions to prevent potential paging collision.
For multi-USIM purpose, a multi-USIM device in an RRC connected state in network A may have to switch from network A to network B. Network A may be NR and Network B may either be E-UTRA or NR. Before switching from network A, a multi-USIM device may notify network A to either leave an RRC connected state, or be kept in an RRC connected state in network A while temporarily switching to network B.
A multi-USIM device may signal the network a preference to leave an RRC connected state by using an RRC or an NAS signaling/message. After sending a preference to leave an RRC connected state by using RRC signaling, if the multi-USIM device does not receive an RRC release message from the network A within a certain time period (if configured by the Network), the multi-USIM device can enter an RRC idle state in the network A.
A multi-USIM device may signal the network a preference to be kept in an RRC connected state in Network A while temporarily switching to network B, this is indicated by scheduling gaps preference. This preference may include information for setup or release of gaps. For example, the network may configure at most 3 gap patterns for multi-USIM purpose: two periodic gaps and a single aperiodic gap.
A multi-USIM device, in an RRC connected state in network A and in an RRC idle state or an RRC idle state in network B, may receive a paging message from network B. If the multi-USIM device considers the current service in network A as having higher importance/priority than the service in Network B, it can reject the incoming paging by sending a signal (e.g., NAS signal) including a busy Indication.
A wireless device (e.g., a multi-USIM device) may signal the network through UE Assistance Information: if the wireless device prefers to leave the network for multi-USIM purpose; or if the wireless device wants to include assistance information for setup or release of gaps for multi-USIM purpose.
FIG. 26 illustrates an example of switching gap time without leaving an RRC connected state in a first network. A wireless device (multi-USIM device) may operate at least two universal subscriber identity modules. For example, a first USIM of the wireless device may be associated with a first network. A second USIM of the wireless device may be associated with a second network. The wireless device may have limited capability for transmission and reception at given time. For, example, the wireless device may have a radio frequency (RF) module which supports one transmission (1 Tx) and one or two reception (1 or 2rx) at given time. Due to the limitation, the wireless device may not transmit a packet with two networks simultaneously. A first network associated with a first USIM may transmit, to a wireless device, a switching gap time during which the wireless device be allowed to switch to a second network associated with a second USIM. During the switching gap time, the wireless device may switch to the second network. After the switching, the wireless device may monitor, during the switching gap time, downlink signal or acquire system information block (SIB)/SSB, or receive a paging, or transmit a signal. A signal may be a request for on-demand system information (SI).
In an example of FIG. 26, a (first) network may be allowed to configure one or more gap patterns for a switching gap time. The system frame number (SFN) and subframe of a primary cell of a first network is used in the gap configuration, of the switching gap time, to calculate the gap of the switching gap time. For example, the switching gap configuration may explicitly provide a gap starting position (e.g., offset value or start SFN and subframe explicitly), gap length and gap repetition period. One or more switching Gaps may be configured or released by RRC signalling (e.g., RRC reconfiguration message). A gap of the switching gap time may be released autonomously by a wireless device after N repetitions.
In an example of FIG. 26, a wireless device may be allowed to include assistance information for setup or release of gaps for one or more gaps in one UE assistance information Message. To report the assistance information, the wireless device may map the timing info of the gap on the second network to the first network and report the mapped timing info to the first network. For the gap assistance information, the gap start time, duration of the gap and gap repetition period (for periodic) may be included. A transmitter (a radio transmitter) of the wireless device may be an electronic device which produces radio waves with an antenna.
-
- the switching gap time may be referred to as and/or interchangeable with a multi-USIM gap time, a musim gap time and/or the like.
A transmitter (a radio transmitter) of the wireless device may be an electronic device which produces radio waves with an antenna. The transmitter may generate a radio frequency alternating current, which is applied to the antenna. For example, the antenna may radiate radio waves. The term transmitter may be limited to equipment that generates radio waves for communication purposes; or radiolocation, such as radar and navigational transmitters. A transmitter may be a separate piece of electronic equipment, or an electrical circuit within another electronic device. A transmitter and a receiver combined in one unit may be called a transceiver. The term transmitter is often abbreviated “XMTR” or “TX” in technical documents. The purpose of most transmitters may be radio communication of information over a distance. The information may be provided to the transmitter in the form of an electronic signal, such as an audio (sound) signal from a microphone, a video (TV) signal from a video camera, or in wireless (networking) devices, a digital signal from a computer. The transmitter may combine the information signal to be carried with the radio frequency signal which generates the radio waves, which is called the carrier signal. This process may be called modulation. The radio signal from the transmitter may be applied to the antenna, which radiates the energy as radio waves. The antenna may be enclosed inside the case or attached to the outside of the transmitter, as in portable devices such as cell phones. The transmitter may be (group of) antenna or (group of) antenna panel or (group of) MIMO layer or (group of) emitter. Each antenna panel may have one or more antenna elements. For example, a first one or more antennas (or a first one or more antenna panels, or a first one or more MIMO layers) may be a first transmitter. A second one or more antennas (or a second one or more antenna panels, or a first one or more MIMO layers) may be a second transmitter. For example, a base station and/or a wireless device may have multiple antennas. a number of antenna elements may be assembled into multiple antennas. Multi-panel MIMO (layer) may be used for communication between the wireless and the base station.
FIG. 27A and FIG. 27B illustrates an example of a procedure to release a connection of a first network. A wireless device (multi-USIM device) may transmit to a first network a message for releasing a connection of a first network. The message may indicate that the wireless device requests/prefers to release a connection of the first network or transition out of an RRC connected state in the first network or leave an RRC connected state in the first network. Releasing (to release) a connection of a first network may be transitioning (to transition) out of an RRC connected state in the first network or leaving (or to leave) an RRC connected state in the first network. For example, a wireless device (multi-USIM device) may transmit to a first network a request to release a connection of a first network. The request may be a notification of preference to release a connection of first network.
The wireless device may start a timer with a timer value based on the transmitting the message (e.g., the request). The first network may (pre)configured the timer vale to the wireless device. For example, the first network may transmit to the wireless device a message (e.g., an RRC reconfiguration message) comprising the timer value. The wireless device may stop a response to the message. For example, the response may be an RRC release message. The response may be a NAS message (e.g., a service accept message)
FIG. 27A illustrates an example of access stratum (AS) based notification to leave an RRC connected state in a first network (or AS based request procedure to release a connection of a first network). A wireless device may transmit an RRC message (e.g., assistance information message) a base station of a first network where the RRC message indicates a preference to leave an RRC connected state. The wireless device may transmit the RRC message based on determining to transition out of an RRC connected state in the first network (or determining to release a connection of the first network). The RRC message may indicate preferred RRC state of the wireless device. For example, the preferred RRC state may be an idle state or an inactive state or a connected state or out of connected state. After transmitting the RRC message, the wireless device may transition to an RRC idle state in the first network based on not receiving an RRC release message within a certain time period. The first network may (pre)configure a timer value for the certain time period to the wireless device. For example, a base station of the first network may transmit a timer value for the certain time period to the wireless device (e.g., via an RRC reconfiguration message). The wireless device may start a timer with the timer value based on the transmitting the RRC message to the base station. The wireless device may transition to an RRC idle state or an RRC inactive state based on receiving an RRC release message before the timer being expired. The wireless device may transition to an RRC idle state based on not receiving an RRC release message until the timer expires.
FIG. 27B illustrates an example of non-access stratum (NAS) based request procedure to release a connection of a first network. A wireless device may transmit a NAS message requesting to release a connection of the first network (e.g., a service request message or a registration request message) an AMF of a first network. For example, the NAS message may comprise an indication of a request to release a connection of the first network. The connection may be a (N1) NAS signalling connection. Based on the NAS message, the AMF may transmit a response (e.g., a service accept message, or a registration accept message) to the wireless device. Based on the NAS message, the AMF may determine to release the connection for/with the wireless device. The AMF may transmit a request to release (UE) contexts of the wireless device to a base station of the first network. Based on receiving the request, the base station may transmit an RRC release message to the wireless device.
In an example of FIG. 27B, a wireless device may transmit a NAS message requesting to release a connection of the first network (e.g., based on determining to release a connection of the first network). After transmitting the NAS message, the wireless device may transition to an RRC idle state in the first network based on not receiving a second NAS message (e.g., the response) within a certain time period. The first network may (pre)configure a timer value for the certain time period to the wireless device. For example, an AMF of the first network may transmit a timer value for the certain time period to the wireless device (e.g., via a third NAS message). The wireless device may start a timer with the timer value based on the transmitting the third NAS message to the AMF. The wireless device may transition to an RRC idle state based on not receiving a second NAS message (e.g., the response) until the timer expires. For example, the second NAS message may be a service accept/reject message or a registration accept/reject message or an authentication reject message or a deregistration request message or a downlink NAS transport message. The wireless device may transition to an RRC idle state based on receiving an indication from the lower layers (e.g., a RRC layer of the wireless device) that the (RRC) connection has been released (e.g., before the timer expires).
In an example of FIG. 27B, the NAS message requesting to release a connection of the first network may indicate preferred RRC/CM state of the wireless device. For example, the preferred RRC/CM state may be an idle state or an inactive state or a connected state or out of connected state. Based on receiving the NAS message, the AMF may determine an RRC/CM state of the wireless device. Based on the determining, the AMF may indicate the determining (or the RRC/CM state) to a base station of the wireless device. For example, the AMF may transmit a message indicating the determining (or the RRC/CM state) to the base station (e.g., via a request to release contexts of contexts of the wireless device (a UE context release request message)).
A wireless device may be configured with one or more active configured uplink grants. Two schemes for transmission with the configured uplink grant (or transmission without a dynamic grant) may be supported, differing in the ways they are activated. The two schemes ma comprise configured grant type 1 where an uplink grant is provided by RRC (layer), including activation of the uplink grant; configured grant type 2, where the transmission periodicity is provided by RRC (layer) and L1/L2 control signaling (e.g., DCI or MAC CE) is used to activate/deactivate the transmission using the configured uplink grant.
The configured uplink grant may be referred to as and/or interchangeable with a configured grant (CG) or preconfigured uplink grant (PUR).
Type 1 may set one or more transmission parameters (e.g., all transmission parameters), including periodicity, time offset and frequency resources as well as modulation and coding scheme of possible uplink transmission, using RRC signaling. For the RRC signaling, a wireless device may receive an RRC message (e.g., an RRC reconfiguration message) indicating the one or more transmission parameter from a base station. Upon receiving the RRC message, a wireless device may start to use the configured grant for transmission in the time instant given by the periodicity and offset. The offset may be used to control at what time instants the wireless device is allowed to transmit. Based on receiving the RRC message or a time offset relative to SFN, the wireless device may determine activation time of the configured uplink grant. The time offset relative to SFN may indicate activation time of the configured uplink grant. The RRC message may comprise the time offset relative to SFN.
For type 2, an RRC signaling may be used to configure periodicity, while transmission parameters are provided as part of the activation using PDCCH. Upon receiving the activation command, a wireless device may transmit according to the preconfigured periodicity (e.g., if there are data in the buffer of the wireless device). If there are no data to transmit, the wireless device may not transmit any data. The wireless device may acknowledge the activation/deactivation of the configured grant type 2 by sending a MAC control element (MAC CE) in the uplink.
For example, a wireless device may be configured with up to 12 active configured uplink grants for a given BWP of a serving cell. When more than one is configured, a network may decide which of these configured uplink grants are active at a time (e.g., including all of them). Each configured uplink grant may either be of type 1 or type 2. For Type 2, activation and deactivation of configured uplink grants may be independent among the serving cells. When more than one Type 2 configured grant is configured, each configured grant may be activated separately using a DCI command and deactivation of Type 2 configured grants may be done using a DCI command, which may either deactivate a single configured grant configuration or multiple configured grant configurations jointly.
In an example, a wireless device may receive, from a base station, a measurement configuration. The measurement configuration may indicate one or more frequencies and/or one or more cells on which the wireless device performs measurements. Based on the measurement configuration, the wireless device may perform the measurements on a frequency and/or a cell which is indicated by the measurement configuration.
A wireless device may perform measurements using the measurement configuration during a measurement gap, e.g., indicated by the measurement configuration. In the present disclosure, the measurement gap may be referred to as and/or interchangeable with a gap, a gap time (period and/or interval), a measurement gap time (period and/or interval), a switching gap, a switching gap time (period and/or interval), a multi-USIM gap time (period and/or interval), a musim gap time (period and/or interval), a sidelink gap time (period and/or interval) and/or the like.
The measurement gap may be a time duration in which a wireless device may measure wireless channel condition associated with a cell, of a particular base station (e.g., network), and/or configured in a particular frequency using a particular RAT. For example, the particular base station (e.g., network) may be the same base station (e.g., the same network) that the wireless device maintains a connection (e.g., RRC connection). For example, the particular base station (e.g., network) may be different from a base station (e.g., a network) that the wireless device maintains a connection (e.g., RRC connection). For example, the particular RAT may be Wifi, LTE, NR, and/or the like. For example, the particular RAT may be the same RAT that the wireless device uses to maintain a connection (e.g., RRC connection) with a first base station e.g., a network). For example, the particular RAT may be different from an RAT that the wireless device uses to maintain a connection (e.g., RRC connection) with a first base station e.g., a network).
For example, a wireless device may maintain a connection (e.g., RRC connection) with a current base station (e.g., network) during the measurement gap. The wireless device may not communicate with the current base station during the measurement gap. For example, the wireless device may not, during the measurement gap, transmit to and/or receive from the current base station data (e.g., message, packet, SDU, PDU, and/or transport block) and/or a reference signal (e.g., SRS, and/or CSI-RS). The wireless device may not, during the measurement gap, monitor a downlink control channel configured by the current base station. The current base station may not communicate with the wireless device during the measurement gap. For example, the current base station may not, during the measurement gap, transmit to and/or receive from the wireless device, data (e.g., message, packet, SDU, PDU, and/or transport block) and/or a reference signal (e.g., SRS, and/or CSI-RS). The current base station may not, during the measurement gap, monitor an uplink control channel configured for the wireless device.
For example, a wireless device may communicate with a second device (e.g., a second wireless device, a second base station, a second network, and/or the like) during the measurement gap while maintaining a connection (e.g., RRC connection) with a current base station (e.g., network). For example, the communicating with the second device may comprise monitoring a downlink channel (e.g., paging channel, PDCCH, PDSCH, SSB, CSI-RS, and/or the like) of the second device during the measurement gap. For example, the communicating with the second device may comprise receiving a signal and/or data via a downlink channel (e.g., PDCCH, PDSCH, SSB, CSI-RS, and/or the like) from the second device during the measurement gap. For example, the communicating with the second device may comprise receiving a signal (e.g., reference signal such as SSB, CSI-RS) and/or data (e.g., message, packet, SDU, PDU, and/or transport block) via a downlink channel (e.g., PDCCH, PDSCH, SSB, CSI-RS, and/or the like) from the second device during the measurement gap. For example, the communicating with the second device may comprise transmitting a signal (e.g., reference signal such as SRS, preamble, and/or the like) and/or data (e.g., message, packet, SDU, PDU, Msg3, MsgB, and/or transport block) via an uplink channel (e.g., PRACH, PUSCH, PUCCH, and/or SRS, and/or the like) to the second device during the measurement gap.
The wireless device may not communicate with the current base station during the measurement gap. For example, the wireless device may not, during the measurement gap, transmit to and/or receive from the current base station data (e.g., packet, SDU, PDU, and/or transport block) and/or a reference signal (e.g., SRS, and/or CSI-RS). The wireless device may not, during the measurement gap, monitor a downlink control channel configured by the current base station. The current base station may not communicate with the wireless device during the measurement gap. For example, the current base station may not, during the measurement gap, transmit to and/or receive from the wireless device, data (e.g., packet, SDU, PDU, and/or transport block) and/or a reference signal (e.g., SRS, and/or CSI-RS). The current base station may not, during the measurement gap, monitor an uplink control channel configured for the wireless device.
In an example, a wireless device may receive, from a base station, a measurement configuration. The measurement configuration may comprise measurement gap configuration. The measurement gap configuration may comprise one or more configuration parameters. The one or more configuration parameters of the measurement gap may indicate periods that the wireless device may use to perform measurements. The one or more configuration parameters may indicate one or more measurement gaps. Each measurement gap of the one or more measurement gaps may be associated with one or more frequency range that the wireless device performs one or more measurements using the one or more configuration parameters. For example, each measurement gap of the one or more measurement gaps may be per a frequency or a frequency range (e.g., FR1. FR2, and/or FR3) and/or per a wireless device/UE. For example, the measurement gap per a frequency range (e.g., FR1, FR2, and/or FR3) may be applied to measurement(s) that the wireless device performs in the respective frequency range. The measurement gap per the wireless device/UE may be applied to measurement(s) that the wireless device performs one or more (e.g., all) frequencies (e.g., FR1, FR2, and/or FR3). The each measurement gap may comprise at least one of: measurement gap repetition period (mgrp) value, measurement gap length (mgl) value, gap offset value and a serving cell identifier. The mgrp value may indicate measurement gap repetition period in (ms) of the measurement gap. The mgl value may indicate the measurement gap length in ms of the measurement gap. The gap offset value may indicate the gap offset of the gap pattern with mgrp indicated in the field mgrp.
During the measurement gap period/time, the wireless device may not transmit data to the base station. For example, the data may comprise at least one of: HARQ feedback, SR, and CSI, SRS report and UL-SCH. During the measurement gap, the wireless device may not monitor downlink channel (e.g., PDCCH) of a serving cell of the base station. The wireless device may not receive (downlink data) on DL-SCH.
In an example, during the measurement gap period/time, the base station may not transmit downlink data to the base station. For example, the downlink data may comprise at least one of: DCI, MAC CE, and a data on DL-SCH. During the measurement gap, (a serving cell of) the base station may not monitor uplink channel (e.g., PUCCH/PUSCH) of the wireless device. The base station may not receive (uplink data) on UL-SCH.
In the present disclosure, a wireless device may be referred to as and/or interchangeable with a multi-USIM device, a musim device and/or the like.
In the present disclosure, a request to release a connection of a first network may be referred to as and/or interchangeable with at least one of: an indication of a preference to release the connection of the first network; a notification to release the connection of the first network.
In the present disclosure, a request to release a connection of a first network may be referred to as and/or interchangeable with at least one of: a request to leave an RRC connected state in the first network; and a request to transition out of an RRC connected state in the first network.
In the present disclosure, transmitting a request to release a connection of a first network may be further based on determining change, of the preference on an RRC state, from an RRC connected state to an RRC idle state or an RRC inactive state. The request to release the connection of the first network may indicate: the change; or the changed RRC state.
In the present disclosure, data associated with a device/network being available may be referred to as and/or interchangeable with: data associated with the device/network being pending; or data being pending over the device/network; or data being available over the device/network.
In the present disclosure, a first/second device may be a first/second base station or a first/second wireless device.
In the present disclosure, a gap time may be a time duration/period in which a wireless device is allowed to communicate with a second device without releasing a connection of a first device.
In an example, the gap time may indicate a gap starting position (e.g., offset value or start SFN and subframe explicitly), gap length and gap repetition period. One or more gaps of the gap time may be configured or released by RRC signalling (e.g., RRC reconfiguration message).
In an example, the sidelink gap time may indicate a time duration/period in which a wireless device is allowed to communicate, via a sidelink, with a second wireless device without releasing a connection of a first device. For example, the first device may be a first wireless device or a first base station. The first base station may comprise a serving cell of the wireless device. The sidelink may indicate a link between wireless devices.
In the disclosure, an idle state may be an RRC idle state or an CM idle state. A connected state may be an RRC connected state or an CM connected state.
FIG. 28 illustrates an example of a procedure to transmit data associated with a first network during a switching gap time on a second network. As shown in FIG. 26, a first network may indicate to a wireless device (multi-USIM device) a switching gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of the first base station. During the switching gap time, the wireless device may have data (e.g., user plane data or signal) pending over a first network. Based on the data pending over the first network during the switching gap time, the wireless device may wait until the switching gap time expires, to transmit the data to the first network. During the switching gap time, a procedure associated with the first network may be triggered in the wireless device. Based on the procedure associated with the first network, the wireless device may wait to initiate the procedure with the first network until the switching gap time expires. It may cause delay of the transmission of the data or delay of the initiating the procedure.
In existing technologies, concurrent communication of a wireless device with multiple devices (e.g., base stations and/or wireless devices) may cause an interruption in the communication with the multiple devices. For example, the interruption may be caused by a limited hardware capability of the wireless device. For example, the limited hardware capability of the wireless device may comprise the wireless device not capable of simultaneous transmissions with multiple devices (e.g., in different frequencies and/or different RATs and/or limited number of Tx). A first device (e.g., a first base station and/or a first wireless device), e.g., of the multiple devices, may configure to a wireless device a gap time (e.g., measurement gap time) in which the wireless device is allowed to monitor downlink/sidelink channel of a second device (e.g., a second base station and/or a second wireless device), e.g., of the multiple devices, without releasing a connection of the first device. During the gap time, the wireless device may not communicate with the first device to avoid the interruption of the communication with the second device. For example, the wireless device may postpone transmission of first data pending over the first device during the gap time until the gap time expires. For example, the wireless device may drop transmission of first data pending over the first device during the gap time. In the existing technologies, the wireless device may postpone and/or drop the transmission of the first data without considering the QoS requirement and/or processing priority of the first data. The first data may be delay sensitive and/or have a high priority (e.g., emergency service) to handle. For example, the first data postponed and/or dropped during the gap time may comprise a message (e.g., request message) associated with an emergency service. For example, the first data postponed and/or dropped during the gap time may comprise a message to maintain the radio link between the wireless device and the first device. For example, the message to maintain the radio link may comprise a reference signal (e.g., SSB, CSI-RS and/or SRS) used for a radio link management between the wireless device and the first device. For example, the message to maintain the radio link may comprise a recovery request (e.g., beam failure recovery request) of a radio link between the wireless device and the first device. The existing technologies without considering the QoS requirement and/or processing priority of the first data may cause a service (e.g., emergency service) failure and/or performance degradation in the communication with the first device.
For example, a first base station and/or a first network of the base station may configure a wireless device (multi-USIM device) a switching gap time as shown in FIG. 26. In existing technologies, for example, the switching gap time may be longer than other gap times (e.g., measurement gap time). For example, the wireless device may be allowed to transmit/receive second data to/from the second network during the switching gap time. The wireless device having first data pending over the first network during the switching gap time may be to wait more time, until the switching gap time expires, to transmit the first data to the first network or receive a response from the first network. The increased delay from the long gap time may cause severe performance degradation (e.g., interruption/failure) to a type/service of the first data.
In existing technologies, a wireless device (multi-USIM device) may be not allowed to maintain multiple connections, e.g., with RRC connected state and/or with CM connected state (e.g., due to capability of the wireless device). The wireless device may not be allowed to transmit second data to a second network without releasing a connection of a first network (e.g., based on that the transmission of the second data requires a connection of the second network or trigger establishment of the connection of the second network). Based on the second data pending over the second network during a switching gap time, the wireless device may perform a connection release procedure with the first network. The wireless device may wait until the switching gap time expires, to transmit the request to the first network. It may cause delay of transmission of the second data to the second network. If the second data is related to delay sensitive service (e.g., voice call, URLLC, emergency service), the delay may cause interruption/failure of the type/service of the second data.
Example embodiments of the present disclosure are directed to an enhanced procedure for a wireless device to reduce data loss and/or a delay for transmission of a data to a first device (e.g., a first bases station or a first wireless device) during a gap time in which the wireless device is allowed to communicate with a second device (e.g., a second bases station or a second wireless device) without releasing a connection of the first base station. Example embodiments may enable the wireless device to determine, based on a type (e.g., associated with a high priority service, an emergency service, and/or link management) of data, whether transmit the data to the first device during the gap time. For example, the wireless device may selectively determine, e.g., depending on the type of data, whether transmit the data to the first device during the gap time. For example, based on data of a first type being allowed to be transmitted to the first device during the gap time, the wireless device may transmit the data to the first device during the gap time. For example, the first type may be associated with a high priority service, an emergency service, and/or link management. For example, the first type may be predefined and/or indicated by a message received from the first device (e.g., first base station or the first wireless device).
In example embodiments of the present disclosure, a wireless device may determine, based on a type (e.g., associated with a high priority service, an emergency service, and/or link management) of a procedure, whether initiate the procedure with the first device during the gap time. For example, the wireless device may selectively determine, e.g., depending on the type of a procedure, whether initiate the procedure with the first device during the gap time. For example, based on a procedure of a first type being allowed to be initiated with the first device during the gap time, the wireless device may initiate the procedure with the first device during the gap time. For example, the first type may be associated with a high priority service, an emergency service, and/or link management. For example, the first type may be predefined and/or indicated by a message received from the first device (e.g., first base station or the first wireless device).
In example embodiments of the present disclosure, a wireless device may selectively postpone transmission of first data pending over the first device during the gap time. For example, the wireless device may selectively drop transmission of first data pending over the first device during the gap time. For example, the wireless device may selectively postpone and/or drop the transmission of the first data based on the QoS requirement and/or processing priority of the first data. For example, the wireless device may determine to transmit to the first device the first data during the gap time, e.g., if the first data is delay sensitive and/or have a high priority (e.g., emergency service) to handle. For example, the wireless device may not transmit from the first device the first data during the gap time, e.g., if the first data is delay tolerant and/or have a low priority (e.g., email, background, and/or the like) to handle. For example, the wireless device may determine to transmit to the first device the first data during the gap time, e.g., if the first data comprises a message (e.g., request message) associated with an emergency service. For example, the wireless device may not transmit to from the first device the first data during the gap time, e.g., if the first data does not comprise a message (e.g., request message) associated with an emergency service. For example, the wireless device may determine to transmit to the first device the first data during the gap time, e.g., if the first data comprise a message to maintain the radio link between the wireless device and the first device. For example, the wireless device may not transmit to the first device the first data during the gap time, e.g., if the first data does not comprise a message to maintain the radio link between the wireless device and the first device. The example embodiments of the present disclosure based on the QoS requirement and/or processing priority of the first data may reduce a service (e.g., emergency service) failure and/or improve performance in the communication with the first device.
In example embodiments of the present disclosure, a wireless device may selectively postpone initiating a procedure with the first device during the gap time. For example, the wireless device may selectively not initiate a procedure with the first device during the gap time. For example, the wireless device may selectively postpone and/or not initiate the procedure with the first device during the gap time based on a type of the procedure if the procedure is associated with delay tolerant service/procedure and/or a low priority service/procedure (e.g., measurement reporting, assistance information, and/or the like) to handle. For example, the wireless device may selectively postpone and/or not initiate the procedure with the first device during the gap time based on a type of the procedure if the procedure is not associated with emergency service/procedure; or management of the radio link between the wireless device and the first device.
In example embodiments of the present disclosure, a wireless device may transmit an indication to the first device, e.g., in response to or after determining to transmit to the first device the first data during the gap time or determining to initiate the procedure during the gap time. The wireless device may transmit the indication during the gap time. The indication may indicate an early termination of the gap time or a request to cancel/deactivate the gap time in response to the first data available to the first device. The indication may comprise a request of an uplink grant. For example, the wireless device may transmit the first data or data/signal, of the procedure initiated with the first device, via a radio resource (e.g., during the gap time) indicated by the uplink grant. The indication transmitted during the gap time may enable the wireless device and/or the first device to process the first data while satisfying the QoS requirement(s) of the first data.
In example embodiments, the indication that the wireless device may transmit to the first device, (e.g., in response to or after determining to transmit to the first device the first data during the gap time) may comprise a random access (RA) preamble, SR, and/or BSR. For example, the wireless device may transmit the first data via a radio resource indicated by an uplink grant received, e.g., in response to the transmission of the indication. The wireless device may transmit the indication via a radio resource indicated by the configured (e.g., periodic) grant during the gap time. The wireless device may transmit the first data via a radio resource indicated by the configured (e.g., periodic) grant during the gap time.
In example embodiments, based on data of a first type being allowed to be transmitted to a first device during a gap time, a wireless device may initiate a procedure to request uplink resource for transmission of the data to the first device. Based on the initiating the procedure, the wireless device may transmit the request of uplink resource to the first device. For example, the request may be a random access (RA) preamble or a scheduling request (SR) or a buffer status reporting (BSR), e.g., in Msg3 and/or MsgB. Based on receiving a response indicating the uplink resource, the wireless device may transmit the data using the uplink resource. For example, based on a SR being associated with the first type and/or a PUCCH of the SR being valid, the wireless device may transmit the SR using the PUCCH. Based on receiving a response indicating uplink resource, the wireless device may transmit the data using the uplink resource. The example embodiments may enable the wireless device to obtain uplink resource for transmission of the data pending over the first device during the gap time.
In example embodiments, based on data of a first type being allowed to be transmitted to a first device during a gap time, a wireless device may transmit the data using a configured uplink grant (CG) to the first device. For example, based on data of a first type being allowed to be transmitted to a first device during a gap time, a wireless device may determine whether a configured uplink grant (CG) is valid. The CG may be associated with the first type of the data. Based on determining the CG being valid, the wireless device may transmit the data to the first device using the CG. This example embodiments may enable the wireless device to reduce delay of transmission of data pending over the first device during the gap time by avoiding a procedure to request uplink resource for transmission of the data pending over the first device.
In example embodiments, based on data of a first type being allowed to be transmitted to a first device during a gap time, a wireless device may switch to the first device. This example embodiments may enable the wireless device to reduce delay of transmission of data pending over the first device during the gap time. The wireless device may transmit a signal indicating the switching to the first device. For example, the signal may indicate that data is pending over the first device. The signal may further indicate the first type of the data. Based on the signal, the first device may transmit a response. The response may indicate uplink resource for transmission of the data. The wireless device may transmit the data using the uplink resource. This example embodiments may enable the wireless device to reduce delay of transmission of data pending over the first device during the gap time based on indicating data pending over the first device and/or the first type of the data.
In an example, a wireless device may have pending data associated with a first device during a gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of a first device. Based on a type of the pending data, the wireless device may determine whether to transmit the pending data to the first device during the gap time. The wireless device may determine to transmit the pending data to the first device during the gap time based on the pending data of the type being allowed to be transmitted to the first device during the gap time.
In an example, based on the determining to transmit the pending data to the first device during the gap time, the wireless device may switch to the first device. The wireless device may transmit to the first device the pending data during the gap time based on at least one of: the switching to the first device and the determining to transmit the pending data to the first device during the gap time.
In an example, a wireless device may determine whether to initiate a procedure with a first device during a gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of a first device. For example, based on a event (e.g., radio failure), a procedure associated with the event and the first device may be triggered during the gap time. A wireless device may determine whether to initiate the procedure with a first device during the gap time. Based on a type of the procedure, the wireless device may determine whether to initiate the procedure with the first device during the gap time. The wireless device may determine to initiate the procedure with the first device during the gap time based on the procedure of the type being allowed to be initiated with the first device during the gap time.
In an example, based on the determining to initiate the procedure with the first device during the gap time, the wireless device may switch to the first device. The wireless device may initiate the procedure with the first device during the gap time based on at least one of: the switching to the first device and the determining to initiate the procedure with the first device during the gap time. Based on the initiating the procedure, the wireless device may transmit to the first device data (e.g., a signal) of the procedure (e.g., during the gap time). For example, based on the initiating the procedure, the wireless device may generate the data of the procedure. Based on the generating the data, the wireless device may transmit to the first device the data of the procedure (e.g., during the gap time).
In an example, a first device may (pre)configure/indicate to a wireless device that data of a first type being allowed to be transmitted to the first device during the gap time. For example, the first device may transmit to the wireless device an indication indicating that a data of a first type is allowed to be transmitted to the first device during the gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of the first device. The wireless device may have pending data associated with the first device during the gap time. The wireless device may determine to transmit the pending data to the first device during the gap time based on that a type of the pending data is the first type.
In an example, a first device may (pre)configure/indicate to a wireless device that a procedure of a first type being allowed to be initiated with the first device during the gap time. For example, the first device may transmit to the wireless device an indication indicating that a procedure of a first type being allowed to be initiated with the first device during the gap time.
In an example, the wireless device may switch to the first device during the gap time (e.g., based on the determining to transmit the pending data to the first device or determining to initiate the procedure with the first device). The wireless device may switch to the first device during the gap time based on a procedure to communicate with the second device not being completed (e.g., before completing the procedure) during the gap time. The procedure may comprise at least one of: a procedure to perform measurement; and a procedure to detect/receive SSB; a procedure to receive/acquire system information; a procedure to receive paging message; a random access procedure; a scheduling request (SR) procedure; a buffer status reporting (BSR) procedure; and a procedure to transmit a signal.
For example, the wireless device may determine the procedure to perform measurements not being completed based on the switching being performed before deriving/obtaining measurement results for measurement objects of measurement configuration associated with the gap time. The wireless device may determine the procedure to detect/receive SSB not being completed based on the switching being performed before detecting/receiving the SSB from the second device during the gap time. The wireless device may determine the procedure to receive/acquire system information not being completed based on the switching being performed receiving/acquiring the system information from the second device during the gap time. The wireless device may determine the procedure to receive a paging message not being completed based on the switching being performed before receiving a paging message for the wireless device; or not monitoring one or more paging occasions of the gap time (e.g., not monitoring all paging occasions of the gap time).
For example, the wireless device may determine the random access procedure not being completed based on determining the random access procedure being completed unsuccessfully when the switching being performed.
For example, the wireless device may determine the scheduling request (SR) procedure not being completed based on the switching being performed before transmitting a SR of the SR procedure or receiving a response to the SR. The response may be an uplink grant indicating uplink resource. The wireless device may determine the BSR procedure not being completed based on the switching being performed before transmitting a BSR of the BSR procedure or receiving a response to the BSR. The response may be an uplink grant indicating uplink resource. The wireless device may determine the procedure to transmit a signal being not completed based on the switching being performed before transmitting the signal or receiving a response to the signal. For example, the signal may be a request for on-demand system information (SI). The response may be the system information (the on-demand SI).
In an example, the type of the pending data (or the type of the procedure initiated with the first device during the gap time) may indicate at least one of: a service/procedure/slice type associated with the pending data (or the procedure); quality of service (QoS) information associated with the pending data (or the procedure); a radio bearer associated with the pending data (or the procedure); a logical channel associated with the data (or the procedure); a priority associated with the data (or the procedure); an access category associated with the data (or the procedure); and an access identity of the data/the wireless device.
For example, the first type may indicate a first value among one or more values. The first value may indicate a plurality of the one or more values.
For example, the first type may indicate a first service/procedure/slice type among one or more service/procedure/slice type. the first type may indicate a first radio bearer among one or more radio bearers of the wireless device. The first type may indicate a first logical channel among one more logical channels of the wireless device. The first type may indicate a first access category among one more access categories of the wireless device. The first type may indicate a first access identity among one more access identities of the wireless device. The first type may indicate a first priority among one or more priorities of one more logical channels or one or more data.
For example, the first service/procedure/slice type may comprise at least one of: a delay sensitive service/procedure/slice; a recovery procedure of a radio failure; a first request to release the connection of the first device; and a second request to cancel/deactivate/modify the gap time. For example, the first type may indicate voice call (service/procedure/slice type) or URLLC (service/procedure/slice type) or emergency (service/procedure/slice type). For example, the first type may indicate at least one of: “emergency”, “mps-priority access” and “mcs priority access” (e.g., emergency calls, MPS, MCS subscribers) with high priority.
For example, the emergency (service/procedure/slice type) may comprise at least one of: a request for emergency (service/procedure/slice type), an IMS emergency (bearer) service/call, an emergency service fallback and an ecall (over IMS). The ecall may be referred to as a manually or automatically initiated emergency call (TS12 or IMS emergency call), from a vehicle, supplemented with a minimum set of emergency related data (MSD).
In an example, during the gap time, the wireless device may detect a radio failure of the first device (e.g., beam failure or radio link failure). Based on the detecting the radio failure of the first device during the gap time, the wireless device may determine to initiate a recovery procedure, for the radio failure, with the first device during the gap time. For example, based on a type of a procedure initiated being the first type indicating the recovery procedure, the wireless device may determine to initiate a recovery procedure, for the radio failure, with the first device during the gap time. The wireless device may switch to the first device during the gap time based on at least one of: the detecting the radio failure of the first device during the gap time; and the determining to initiate a recovery procedure of the radio failure with the first device during the gap time. The wireless device may initiate the recovery procedure with the first device during the gap time based on at least one of: the switching to the first device or the determining to initiate a recovery procedure of the radio failure with the first device during the gap time. For example, based on the initiating the recovery procedure, the wireless device may generate a signal of the recovery procedure (e.g., during the gap time). The wireless device may transmit the generated signal to the first device (e.g., during the gap time).
In an example, during the gap time, the wireless device may detect a radio failure of the first device (e.g., beam failure or radio link failure). Based on the detecting the radio failure of the first device during the gap time, the wireless device may determine to transmit a signal, of a recovery procedure for the radio failure, to the first device during the gap time. For example, based on a type of the signal indicating the first type indicating the recovery procedure, the wireless device may determine to transmit a signal, of a recovery procedure for the radio failure, to the first device during the gap time. The wireless device may switch to the first device during the gap time based on at least one of: the detecting the radio failure of the first device during the gap time; and the determining to transmit the signal, of the recovery procedure for the radio failure, to the first device during the gap time. The wireless device may transmit the signal to the first device during the gap time based on at least one of: the switching to the first device or the determining to transmit the signal, of the recovery procedure for the radio failure, to the first device during the gap time.
In an example, the wireless device may detect the radio failure of the first device based on monitoring/measuring radio channel from the first device (e.g., downlink channel of the first base station) during the gap time. During the gap time, the wireless device may monitor/measure the radio channel of the first device while communicating with the second device.
For example, the recovery procedure may be beam failure recovery procedure or an RRC connection reestablishment procedure. The signal may be a beam failure recovery (BFR) MAC CE or an RRC reestablishment request message.
For example, the QoS information of the type may comprise at least one of: a QoS flow identifier (QFI); (5G) QoS identifier value; packet delay budget (latency requirement); and a resource type. The first type may indicate a first QFI among one or more QFIs. The first type may indicate a first (5G) QoS identifier vale among one or more (5G) QoS identifier values. The first type may indicate a first resource type among one or more resource types.
For example, the QoS information associated with the pending data (or the procedure) may indicate a parameter indicating QoS requirement of the pending data. Based on the parameter satisfying a threshold of the parameter, the wireless device may determine a type of the pending data being the first type. For example, the parameter may indicate delay requirement (e.g., delay budget) associated with the pending data. Based on the parameter, indicating the delay requirement, being less than a threshold of the parameter, the wireless device may determine the parameter satisfying the threshold of the parameter. Based on the parameter, indicating the delay requirement, being greater than a threshold of the parameter, the wireless device may determine the parameter not satisfying the threshold of the parameter. For example, the parameter may indicate throughput/data rate requirement. Based on the parameter, indicating the throughput/data rate requirement, being greater than a threshold of the parameter, the wireless device may determine the parameter satisfying the threshold of the parameter. Based on the parameter, indicating the throughput/data rate requirement, being less than a threshold of the parameter, the wireless device may determine the parameter not satisfying the threshold of the parameter. For example, the wireless device may be configured with at least one of: the parameter indicating QoS requirement of data; the threshold associated with the parameter and a condition to determine whether the parameter satisfying the threshold (e.g., ‘the parameter being greater than the threshold or the parameter being less than the threshold). For example, the first device may transmit to the wireless device a message indicating at least one of: the parameter indicating QoS requirement of data; the threshold associated with the parameter and a condition to determine whether the parameter satisfying the threshold (e.g., ‘the parameter being greater than the threshold or the parameter being less than the threshold). Based on the message, the wireless device may determine whether the parameter satisfies the threshold associated with the parameter.
In an example, the wireless device may be configured with the gap time from the first device. For example, the wireless device may receive a message indicating the gap time from the first device. Based on the gap time, the wireless device may switch to the second device during the gap time. Based on the determining to transmit the pending data to the first device during the gap time (or the determining to initiate a procedure with the first device during the gap time), the wireless device may switch (back) to the first device. The switching to the first device or the second device may comprise tunning a transmitter and/or a receiver of the wireless device for communication with the first device or the second device; and/or adjusting a parameter for communication with the first device or the second device.
In an example, based on the determining to transmit the pending data to the first device (or the determining to initiate a procedure with the first device during the gap time), the wireless device may initiate a procedure to transmit the pending data (or data of the procedure initiated with the first device). The procedure to transmit the pending data (or the data) to the first device may comprise at least one of: a procedure for uplink resource for the transmission of the pending data (or the data) to the first data; and a procedure for connection of the first device. For example, the wireless device may initiate the procedure to transmit the pending data to the first device based on the switching to the first device.
For example, the wireless device may switch to the second device at T1 time of the gap time. The wireless device may determine to transmit the pending data to the first device during the gap time (or determine to initiate the procedure with the first device during the gap time) at T2 time of the gap time. The T2 time may be later than the T1 time. The wireless device may switch back to the first device at T3 time of the gap time. The T3 time may be later than the T2 time. The wireless device may initiate the procedure to transmit the pending data (or the data of the procedure initiated with the first device), to the first device at T4 time of the gap time. The T4 time may be later than the T3 time. The wireless device may transmit the pending data to the first device at T5 time. The T5 time may be later than the T4 time. For example, the T5 time may be before or after the gap time expires.
In an example, the procedure for uplink resource for the transmission of the pending data (or the data of the procedure initiated with the first device) to the first device may comprise at least one of: a first procedure of configured uplink grant for the transmission; and a second procedure to request uplink resource for the transmission. Based on the first procedure or the second procedure being successfully completed, the wireless device may transmit the pending data (or the data) to the first device. For example, the wireless device may determine the first procedure being successfully completed based on determining that there is valid configured uplink grant for the transmitting the pending data (or the data) to the first device. The wireless device may determine the second procedure being successfully completed based on receiving an uplink grant indicating uplink resource for the transmitting the pending data (or the data) to the first device.
In an example, the first procedure may comprise that the wireless device determine whether determining whether there is valid configured uplink grant for the transmission of the pending data (or the data of the procedure initiated with the first device) to the first data during the gap time. Based on the determining that there is valid configured uplink grant for the transmission of the pending data (or the data) to the first data during the gap time, the wireless device may transmit the pending data (or the data), of the procedure with the first device, to the first device, using the configured uplink grant, during the gap time.
In an example, the wireless device may determine that there is valid configured uplink grant for the transmission of the pending data (or the data of the procedure initiated with the first device) to the first data during the gap time based on at least one of: the determining to transmit the pending data (or the data) to the first device during the gap time; and the switching to the first device. For example, the wireless device may activate/initialize/configure the configured uplink grant based on at least one of: the determining to transmit the pending data (or the data) to the first device during the gap time; and the switching to the first device. For example, the configured uplink grant may be configured to be activated/initialized during the gap time. For example, the wireless device may activate/initialize/configure the configured uplink grant before the gap time (e.g., out of the gap time). An uplink grant of the configured uplink grant may occur during the gap time. The uplink grant may be active uplink grant of the configured uplink grant. For example, the wireless device may determine that there is valid configured uplink grant for the transmission of the pending data (or the data) to the first data during the gap time based on that the uplink grant occurs during the gap time (e.g., after the determining to transmit the pending data/the data or after the switching to the first device).
In an example, the wireless device may determine that there is valid configured uplink grant for the transmission of the pending data (or the data of the procedure indicated with the first device) to the first data during the gap time. The determining may be further based on one or more conditions of a configured uplink grant being met. The one or more conditions may comprise at least one of: timing condition; a reference signal received power (RSRP) condition; and allowance condition. For example, the wireless device may determine the timing condition being met based on that an uplink grant of the configured uplink grant occurs during the gap time (e.g., after the determining to transmit the pending data to the first device and/or after the switching to the first device). The wireless device may determine the RSRP condition being met based on a RSRP of a downlink pathloss reference associated with the configured uplink grant being higher than and equal to a threshold. The wireless device may determine the allowance condition being met based on the configured uplink grant being allowed for the transmitting the pending data (or the data) to the first device during the gap time. For example, the wireless device may receive from the first device an indication indicating the configured uplink grant being allowed for the transmitting the pending data (or the data) to the first device during the gap time. Based on the indication, the wireless device may determine the allowance condition being met.
In an example, the wireless device may initiate the second procedure to request uplink resource for the transmission of the pending data (or the data of the procedure initiated with the first device) to the first data. For example, the wireless device may initiate the second procedure based on determining that there is no valid configured uplink grant for the transmission of the pending data (or the data) to the first data during the gap time. Based on the initiating the second procedure, the wireless device may transmit a request of uplink resource for the transmitting the pending data (or the data) to the first device during the gap time. The first procedure may comprise at least one of: a random access (RA) procedure; a scheduling request (SR) procedure; and a buffer status reporting (BSR) procedure; and an RRC connection procedure. The request may be a RA preamble or a SR or a BSR. For example, the wireless device may initiate the SR procedure. The wireless device may transmit to the first device the SR based on one or more condition for the SR being met. The one more conditions may comprise at least one of: the SR being associated with (e.g., being configured to) the type (e.g., logical channel) of the pending data (or the data or the procedure); and determining that a PUCCH of the SR being valid. The wireless device may not transmit the SR to the first device based on the one or more conditions for the SR not being met. The wireless device may initiate the RA procedure (e.g., based on the one or more conditions for the SR not being met). Based on the initiating the RA procedure, the wireless device may transmit to the first device Msg 1 or Msg A where the Msg 1 or the Msg A comprises the RA preamble. The wireless device may initiate the BSR procedure. Based on the initiating the BSR procedure, the wireless device may transmit the BSR (e.g., via Msg 3 or Msg B) to the first device.
For example, based on the determining to transmit the pending data (or the determining to initiate the procedure with the first device during the gap time) to the first device, the wireless device may initiate the procedure to transmit the pending data (or the data of the procedure) to the first device. Based on the determining to transmit the pending data to the first device, the wireless device may initiate the procedure for connection of the first device. For example, based on the determining to transmit the pending data (or the data) to the first device, the wireless device may switch back to the first device. Based on the switching back to the first device, the wireless device may detect a failure of the connection of the first device. For example, the failure may comprise radio link failure (RLF) of the connection; and/or change of serving cell of the first device (e.g., the first base station). Based on detecting the failure of the connection of the first device, the wireless device may initiate an RRC connection procedure. The procedure for connection of the first device may be the RRC connection procedure. The RRC connection procedure may comprise at least one of: an RRC connection establishment procedure; an RRC connection resume procedure; and an RRC connection reestablishment procedure. Based on the initiating the RRC connection procedure, the wireless device may initiate transmission of an RRC request message to the first device. Based on the initiating the transmission of the RRC request message, the wireless device may indicate an RA procedure (e.g., to request uplink resource for the transmission of the RRC request message). Based on the initiating the transmission of the RRC request message or receiving an uplink grant indicating the uplink resource, the wireless device may transmit the RRC request message to the first device. The RRC request message may be an RRC setup request message; or an RRC resume request message; or an RRC reestablishment request message. Based on receiving an RRC response message to the RRC request message, the wireless device may transmit the pending data (or the data) to the first device.
For example, the wireless device may initiate the procedure for connection of the first device. The wireless device may determine to transmit the pending data (or the data of the procedure with the first device) to the first device via a small data transmission (SDT) procedure. Based on the determining, the wireless device may initiate the RRC connection procedure for the SDT procedure as the procedure. The wireless device may transmit the pending data (or the data) via the SDT procedure without establishing/resuming the connection of the first device. For example, the wireless device may transmit first data of the pending data (or the data) and the RRC request message via a first message. The first message may be Msg 3 or Msg A. The wireless device may transmit second data of the pending data (or the data) via a second message. The second message may be a message transmitted after the first message.
In an example, a wireless device may transmit an indication to the first device, e.g., in response to or after determining to transmit to the first device the first data during the gap time. The wireless device may transmit the indication during the gap time. The indication may indicate an early termination of the gap time in response to the first data available to the first device. The request of uplink resource may comprise/indicate the indication. The wireless device may transmit the indication via the valid configured uplink grant for the transmission of the pending data (or the data of the procedure initiated with the first device) to the first data during the gap time. The wireless device may transmit the indication via the RRC connection procedure for the SDT procedure. For example, the wireless device may transmit the indication via the first message (e.g., Msg 3 or Msg A) or the second message (e.g., Msg 5). For example, the wireless device may transmit the RRC request message comprising the indication. The wireless device may transmit the indication via an RRC complete message of Msg 5.
FIG. 29 illustrates an example of enhanced procedure to transmit data pending over a first network during a switching gap time. A wireless device (e.g., a multi-USIM device) in an RRC connected state in a first network (e.g., a first base station of the first network) may have data pending over the first network during a switching gap time in which the wireless device is allowed to communicate with the second network without releasing a connection of the first network. Based on a type of the pending data, the wireless device may determine whether to transmit the pending data to the first network during the switching gap time.
In an example of FIG. 29, based on determining to transmit the pending data to the first network during the switching gap time, the wireless device may switch to the first network from the second network during the switching gap time. Based on the switching, the wireless device may transmit the pending data to the first network. The wireless device may transmit the pending data to the first network using a configured uplink grant. For example, the wireless device may transmit the pending data to the first network using a configured uplink grant based on determining the configured uplink grant being valid. The wireless device may initiate a procedure to request uplink resource for the transmitting the pending data to the first network (e.g., based on determining that there is no valid configured uplink grant). Based on receiving an uplink grant indicating the uplink resource, the wireless device may transmit the pending data using the uplink resource to the first network during the gap time.
In an example of FIG. 29, the first network (e.g., a first base station of the first network) may transmit the wireless device an indication indicating data of a first data being allowed to be transmitted to the first network during the switching gap time. The wireless device may determine to transmit the pending data to the first network during the switching gap time based on that a type of the pending data is the first type.
In an example of FIG. 29, the wireless device may switch to a second network during the switching gap time. Based on the determining to transmit the pending data to the first network, the wireless device may switch back to the first network. The wireless device may transmit the pending data to the first network. The wireless device may transmit the pending data to the first network using a configured uplink grant based on the configured uplink grant being valid. The wireless device may transmit a request of uplink resource to the first device. Based on receiving an uplink grant indicating uplink resource as a response to the request, the wireless device may transmit the pending data to the first network using the uplink resource.
FIG. 30 illustrates an example of flow diagram to transmit data pending over a first device during a gap time of a second device. A wireless device may have data pending over a first device during a gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of the first device. Based on a type of the data, the wireless device may determine whether to transmit the data to the first network during the gap time. Based on the determining being determining to transmit the data during the gap time, the wireless device may initiate the procedure to transmit the data to the first data during the gap time. Based on the determining being determining not to transmit the data during the gap time, the wireless device may postpone the procedure to transmit the data to the first device and/or buffering the data (e.g., at least until the gap time expires) and/or drop the data.
FIG. 31 illustrates an example of enhanced procedure to transmit data of delay sensitive service pending over a first network during a switching gap time. During a switching gap time in which a wireless device is allowed to communicate with a second network without releasing a connection of a first network, the wireless device may have data pending over the first network. The data may be associated with a delay sensitive service. Based on the delay sensitive service being the first type, a wireless device may determine to transmit the data to a first network during the switching gap time.
FIG. 32 illustrates an example of enhanced procedure to transmit a signal to recover a radio failure of a first network during a switching gap time. During a switching gap time in which a wireless device is allowed to communicate with a second network without releasing a connection of a first network, the wireless device may detect a radio failure of the first network (e.g., a radio failure of the first base station of the first network). Based on the detecting the radio failure of the first network during the switching gap time, the wireless device may determine to transmit to the first device a signal to recover the radio failure during the switching gap time.
In an example, during a gap time in which a wireless device is allowed to communicate with a second device without releasing a connection of a first device, the wireless device may determine to release a connection of the first device during the gap time. The wireless device may determine to release the connection of the first device based on determining to transmit data to the second device during the gap time. For example, the wireless device may determine to transmit the data to the second device during the gap time based on a type of the data may be the first type. Based on the determining to release the connection of the first device, the wireless device may determine to transmit a request to release the connection during the gap time.
In an example, during a gap time in which a wireless device is allowed to communicate with a second device without releasing a connection of a first device, the wireless device may determine to transmit a request, to release a connection of the first device, to the first device. For example, based on a type of the request being the first type, the wireless device may determine to transmit a request to release a connection of the first device to the first device during the gap time. The wireless device may switch to the first device based on the determining to transmit the request to the first device during the gap time. The wireless device may transmit the request to the first device during the gap time based on at least one of: the switching to the first device and the determining to transmit the request (e.g., as shown in FIG. 27A or FIG. 27B).
In an example, during a gap time in which a wireless device is allowed to communicate with a second device without releasing a connection of a first device, the wireless device may initiate a procedure to release a connection of the first device to the first device (e.g., as shown in FIG. 27A or FIG. 27B). For example, based on a type of the procedure being the first type, the wireless device may determine to initiate a procedure to release a connection of the first device to the first device during the gap time. Based on the determining to initiate the procedure with the first device during the gap time, the wireless device may switch to the first device. The wireless device may initiate the procedure with the first device during the gap time based on at least one of: the switching to the first device and the determining to initiate the procedure with the first device during the gap time. Based on the initiating the procedure, the wireless device may transmit to the first device data (e.g., a signal) of the procedure (e.g., during the gap time). For example, based on the initiating the procedure, the wireless device may generate the data of the procedure. Based on the generating the data, the wireless device may transmit to the first device the data of the procedure (e.g., during the gap time).
For example, the wireless device may determine to transmit the request to release a connection of the first device to the first device; or determine to initiate the procedure to release a connection of the first device with the first device during the gap time based on having data pending over the second device during the gap time or determining a procedure to transmit the data to the second device during the gap time. For example, the data may be associated with the delay sensitive service (e.g., voice call, URLLC or emergency service/call).
For example, the data may be a registration request message or a service request message or a response to a paging message. The response may be a registration request message or a service request message or an RRC setup/resume request message. For example, during the gap time, the wireless device may acquire a system information and receive a paging message for the wireless device. Based on the system information or the paging message, the wireless device may determine to transmit the data or determine to initiate a procedure to transmit the data (e.g., a registration procedure or a service request procedure or a RRC connection establishment/resume procedure) to the second device during the gap time.
FIG. 33 illustrates an example of enhance procedure to transmit a request to release a connection to a first network during a switching gap time. During a switching gap time in which a wireless device is allowed to communicate with a second network without releasing a connection of a first network, the wireless device may determine to transmit a request to release a connection of the first device to the first device. Based on the determining, the wireless device may switch to the first network. During the switching gap time, the wireless device may transmit the request to the first network (as shown in FIG. 27A or FIG. 27B) based on at least one of: the determining to transmit the request and the switching to the first device.
In an example of FIG. 33, during the switching gap time, the wireless device may determine to initiate a procedure to release a connection of the first device with the first device. Based on the determining, the wireless device may switch to the first network. During the switching gap time, the wireless device may initiate the procedure during the switching gap time. During the switching gap time, the wireless device may transmit the request to the first network (as shown in FIG. 27A or FIG. 27B) based on at least one of: the initiating the procedure and the switching to the first device.
In an example, a wireless device may comprise one or more layers (e.g., as shown in FIG. 19A, FIG. 19B and FIG. 19C). The one or more layers may comprise at least one of: IMS layer or application layer, a NAS layer, an RRC layer, a MAC layer and a physical layer. the one or more layers may be associated with the first device.
In an example, a first layer of the one or more layers may determine whether to transmit data pending over a first device during a gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of a first device. The pending data may be first data generated in the first layer or second data received from a second layer of the one or more layers. The pending data may be associated with a procedure of the one or more layers. Based on a type of the pending data, the first layer may determine whether to transmit the pending data to the first device during the gap time. Based on the determining and the pending data being the second data, the first layer may transmit an indication indicating the determining to the second layer. Based on the determining being determining not to transmit the pending data, the indication may further indicate postponing transmission of the pending data. Based on the indication, the second layer may not transmit data of the type or not initiate a procedure of the type with a first device. The second layer may submit second data of a second type to the first layer. The second layer may initiate a second procedure of a second type with the first device. For example, based on the indication, the second layer may start a timer. The second layer may determine not to transmit data to the first device while the timer is running or to initiate the procedure with a first device while the timer is running.
In an example, a first layer of the one or more layers may determine whether to initiate a procedure with a first device during a gap time. Based on a type of the procedure, the first layer may determine whether to initiate a procedure with a first device during a gap time.
In an example, a first layer of the one or more layers may indicate to a second layer of the one or more layers whether transmission to the first device is allowed during the gap time. Based on the indicating, the second layer may determine whether to transmit data to the first device during the gap time and/or whether to initiate a procedure with the first device during the gap time.
In an example, a first layer of the one or more layers may indicate to a second layer of the one or more layers the gap time. Based on the gap time, the second layer the second layer may determine whether to transmit data to the first device during the gap time and/or whether to initiate a procedure with the first device during the gap time.
In an example, based on the determining being determining to transmit the data, the second layer may submit the data to lower layers (e.g., the first layer) of the second layer. based on the determining being determining to initiate the procedure with the first device during the gap time, the second layer may initiate the procedure with the first device during the gap time. Based on the initiating the procedure, the second layer may submit data, of the procedure, to lower layers (e.g., the first layer) of the second layer.
In an example, a second layer of the one or more layers may submit data to lower layers (e.g., the first layer) of the second layer. The second layer submitting the data to the lower layers may indicate a type of the data. Based on the type of the data, the lower layers may determine whether to transmit the data to the first device during the gap time. For example, the second layer may determine whether to transmit the data to the first device during the gap time (e.g., based on the type of the data).
For example, a second layer of the one or more layers may determine to transmit the data to the first device during the gap time. The second layer may submit the data to lower layers (e.g., the first layer) of the second layer. the second layer submitting the data to the lower layer may indicate the determining, based on the indicating, the lower layers may determine to transmit the data to the first device during the gap time.
FIG. 34 illustrates an example of access stratum (AS) based procedure to transmit data associated with a first device during a gap time on a second device. Upper layers (e.g., a NAS layer) of the one or more layers may have data pending over a first device during the gap time. The NAS layer may submit the data to lower layers (e.g., an RRC layer) of the one or more layers of the wireless device. The NAS layer submitting the data to the RRC layer may indicate a type of the data to the RRC layer. The RRC layer may transmit the data to the first device during the gap time. For example, based on the indicating, the RRC layer may determine whether to transmit the data to the first device during the gap time. Based on the determining being determining to transmit the data, the RRC layer may transmit the data to the first device. For example, based on the determining being determining not to transmit the data, the RRC layer may indicate the determining to the NAS layer. Based on the indicating, the NAS layer may not transmit data of the type to the first device during the gap time. Based on having second data, of a second type, pending over the first device, the NAS layer may submit the second data to the RRC layer. For example, based on the indicating, the NAS layer may not transmit data of the type to the first device during the gap time until receiving from the RRC layer a second indication indicating determining to transmit data of the type to the first device during the gap time.
FIG. 35 an example of non-access stratum (NAS) based procedure to transmit data associated with a first device during a gap time on a second device. Based on a data pending over the first device and a type of the data, a NAS layer of the one or more layers may determine whether to transmit the data to the first device during the gap time. Based on the determining being determining to transmit the data to the first device during the gap time, the NAS layer may submit the data to lower layers (e.g., an RRC layer). The NAS layer submitting the data to the RRC layer may indicate the determining (e.g., transmission to the first device during the gap time being allowed/required) to the RRC layer. The RRC layer may transmit the data to the first device during based on at least one of: the data and the indicating.
In an example, a wireless device may receive from a first network, one or more messages indicating: a switching gap time in which the wireless device is allowed to communicate with a second network without releasing a connection of the first network; and that data of a first type is allowed to be transmitted to the first network during the switching gap time. The wireless device may transmit, to the first network and during the switching gap time, first data based on: the first data associated with the first network being available; and a type of the first data being the first type.
In an example, a wireless device may receive, from a first base station, a parameter indicating a gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of the first base station; The wireless device may transmit, to the first base station and during the gap time, first data of a first type based on that data of the first type is allowed to be transmitted to the first base station during the gap time.
In an example, the first type may indicate at least one of: a service/procedure/slice type associated with the data; quality of service (QoS) information of the data; a radio bearer of the data; a logical channel of the data; a priority of the data; an access category of the data; and an access identity of the data. The service/procedure/slice type may comprise at least one of: a delay sensitive service/procedure/slice; a recovery procedure of a radio failure; a first request to release the connection of the first base station of the first base station; and a second request to cancel/deactivate/modify the gap time.
In an example, the connection may comprise at least one of: an RRC connection; and an (N1) NAS signalling connection. The delay sensitive service/procedure/slice may comprise at least one of: a voice service/procedure/slice type; an emergency service/procedure/slice type; a delay critical service; and a low latency service. The QoS information may comprise at least one of: a QoS flow identifier (QFI); (5G) QoS identifier value; packet delay budget (latency requirement); and a resource type. The recovery procedure may comprise at least one of: a beam failure recovery (BFR) procedure; and an RRC connection reestablishment procedure. The radio failure may comprise at least one of: a beam failure; and a radio link failure (RLF).
In an example, the transmitting the first data of the first type indicating the recovery procedure of the radio failure may comprise transmitting the first data of the first type indicating the recovery procedure of the radio failure based on detecting the radio failure in the first network during the gap time. The detecting the radio failure in the first network during the gap time may be based on monitoring a downlink physical signal (or a downlink reference signal) of a cell of the first network during the gap time.
In an example, the transmitting the first data of the first type may comprise transmitting the first data indicating the first type.
In an example, the wireless device may determine the transmitting the first data of the first type during the gap time based on: the first data associated with the first base station being available during the gap time; and transmission of data, of the first type, to the first base station being allowed during the gap time.
In an example, the wireless device may switch, based on the receiving the gap time, to the second device during the gap time. The wireless device may switch, based on the determining the transmitting the first data, to the first base station from the second device during the gap time.
In an example, the switching to the first base station during the gap time may comprise switching to the first base station during the gap time, based on a procedure to communicate with the second device not being completed during the gap time. The procedure to communicate with the second device not being completed may comprise at least one of: a procedure to perform measurements; a procedure to detect/receive SSB; a procedure to receive/acquire system information; a procedure to receive paging message; a random access procedure; a scheduling request procedure; a buffer status reporting procedure; and a procedure to transmit a packet. The wireless device may communicate, based on the switching to the second device, with the second device.
In an example, the wireless device may transmit a signal indicating the switching to the first base station based on at least one of: the switching to the first base station; and the determining the transmitting the first data of the first type.
In an example, the transmitting the signal indicating the switching may comprise transmitting the signal indicating the switching during the gap time. The signal indicating the switching further may indicate the first type. The transmitting the first data may comprise transmitting the first data based on at least one of: the switching to the first network; and the transmitting the signal indicating the switching to the first network.
In an example, the switching to the second device may comprise adjusting one or more receiver parameters of the wireless device to receive data from the second device. The switching to the second device may comprise adjusting one or more transmitter parameters of the wireless device to transmit data to the second device. The adjusting to the second device may be tunning radio frequency (RF) of the wireless device to the second device.
In an example, the wireless device may initiate, based on the gap time, a procedure to request uplink resource for the transmitting the first data based on at least one of: the switching to the first base station; and the determining the transmitting the first data of the first type.
In an example, the transmitting the first data may comprise transmitting the first data using the uplink resource. The procedure may comprises at least one of: a scheduling request (SR) procedure; a buffer status reporting (BSR) procedure; and a random access (RA) procedure.
In an example, the wireless device may transmit, based on the initiating the procedure, a request of the uplink resource wherein the request comprises at least one of: a scheduling request (SR); a buffer status reporting (BSR); and a random access (RA) preamble.
In an example, the transmitting the SR may be based on the SR being associated with the first type; and determining that a physical uplink control channel (PUCCH) of the SR being valid.
In an example, the SR being associated with the first type may be a SR being associated with a logical channel of the first data. The transmitting the SR may be transmitting the SR via the PUCCH.
In an example, the transmitting the first data during the gap time may comprise transmitting the first data using a configured uplink grant (CG) during the gap time. The transmitting the first data using the CG may be based on at least one of: determining the transmitting the first data of the first type during the gap time; and switching, based on the determining the transmitting the first data, to the first base station from the second device during the gap time.
In an example, the transmitting the first data using the CG during the gap time may be further based on at least one of: determining that the CG is valid during the gap time; the switching to the first base station; and the determining the transmitting the first data of the first type. The determining that the CG is valid during the gap time may be based on: the switching to the first base station; and the determining the transmitting the first data of the first type. The determining the CG being valid during the gap time may be further based on that a reference signal received power (RSRP) value of a downlink pathloss reference associated with the CG is higher than and equal to a threshold.
In an example, the wireless device may receive, from the first base station, an indication indicating that data of a first type is allowed to be transmitted to the first network during the gap time. The transmitting the first data may be further based on the indication. The receiving the gap time and the indication may be via an RRC reconfiguration message.
In an example, the wireless device may transmit a request to allow that the wireless device transmits data to the first network during a gap time. The request may indicate one or more types of the data. The transmitting the request may comprise transmitting the request based on receiving an indication to allow the wireless device to transmit the request to the first network.
In an example, the communicating may comprise at least one of: monitoring a channel of the second device; receiving a signal from the second device; transmitting a signal to the second device; and performing measurement on a cell/frequency of the second device.
In an example, the gap time may comprise at least one of: a switching gap time;
-
- a measurement gap time; and In-device coexistence (IDC) gap time.
In an example, the second device may be a second cell; a second base station; or a second wireless device.
In an example, the wireless device may be not capable of concurrent transmission to multiple devices.
In an example, the wireless device being not capable of concurrent transmission to multiple devices is based on at least one of: the wireless device having single transmitter; radio frequencies of the multiple device; and radio access technologies of the multiple devices.
In an example, the first base station may be a first base station of a first network; and the second device may be a second base station of a second network.
In an example, the wireless device may comprise; a first universal subscriber identity module (USIM) being associated with the first network; and a second USIM being associated with the second network.
In an example, the first network may be associated with a first public land mobile network (PLMN); and the second network may be associated with a second PLMN.
In an example, the first data may comprise at least one of: an user plane data; and
-
- a signal. The signal may comprise at least one of: a NAS message; an RRC message; and a medium access control (MAC) signal.
In an example, a first base station may transmit to a wireless device one or more messages indicating: a gap time in which the wireless device is allowed to communicate with a second network without releasing a connection of the first base station; and that data of a first type is allowed to be transmitted to the first network during the switching gap time. The first base station may receive, during the gap time, the data of the first type.
In an example, a first base station may transmit to a wireless device a parameter indicating a gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of the first base station. The first base station may receiving, during the gap time, first data of a first type wherein data of the first type is allowed to be transmitted to the first base station during the gap time.
In an example, the first base station may monitor uplink channel of the wireless device during the gap time. The receiving the first data may be based on the monitoring the uplink channel of the wireless device during the gap time.
In an example, a radio resource control (RRC) layer of a wireless device may determine, during a gap time, to transmit first data to a first device based on the first data being associated with a first type wherein the gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of the first device.
In an example, the RRC layer may be a RRC layer of a second USIM of the wireless device.
In an example, a non-access stratum (NAS) layer of a wireless device may determine, during a gap time, to transmit first data to a first device based on the first data being associated with a first type wherein the gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of the first device.
In an example, the NAS layer may be a NAS layer of a second USIM of the wireless device.
In an example, a wireless device may switch to a second device without releasing a connection of a first device based on a switching gap time. The wireless device may determine, during a switching gap time, to transmit first data to a first device based on the first data being associated with a first type wherein a switching gap time in which the wireless device is allowed to communicate with a second device without releasing a connection of the first device. The wireless device may switch, based on the determining, to the first device during the switching gap time. The wireless device may transmit, during the switching gap time, the first data to the first device.
In an example, the determining by the wireless device may be determining by a non-access stratum (NAS) layer of the wireless device. The transmitting by the wireless device may be transmitting by the NAS layer of the wireless device.
In an example, the determining by the wireless device may be determining by a radio resource control (RRC) layer of the wireless device. The transmitting by the wireless device may be transmitting by the RRC layer of the wireless device.
In an example, the switching by the wireless device may be switching by a RRC layer of the wireless device.
In an example, the NAS layer may be a NAS layer of a second USIM of the wireless device.
In an example, the RRC layer may be a RRC layer of a second USIM of the wireless device.